LM324AMX/NOPB - 32V Quad 1MHz Op Amp | Texas Instruments
MPN: LM324AMX/NOPB ✓ چالاکLM324AMX/NOPB گشتی
An operational amplifier is an analog signal-conditioning IC that amplifies the difference between its inverting and non-inverting inputs. The operational-amplifier category includes general-purpose amplifiers, precision amplifiers, instrumentation amplifiers, and comparators; the LM324 belongs to the general-purpose single-supply amplifier family. Its four independent channels can run from the same supply while handling separate signal paths.
The LM324AMX/NOPB provides a large DC voltage gain of 100 dB and is internally compensated for stable operation at unity gain. Its wide 3 V to 32 V supply range supports both conventional 5 V and 12 V analog systems as well as higher-voltage industrial rails. The output can swing from approximately 0 V to VCC minus 1.5 V, making rail-to-rail operation unnecessary when the signal remains within that range. The input common-mode voltage range includes ground, which is useful for single-supply sensing circuits.
The amplifier's low-power architecture suits battery-operated instrumentation, analog signal conditioning, sensor amplification, and control loops where a precision rail-to-rail amplifier is unnecessary. Four amplifiers in one package also reduce board area when a design needs several similar analog channels. The internally compensated topology simplifies stable feedback design around unity gain, although applications requiring higher closed-loop gain or faster settling need additional bandwidth and stability analysis.
Typical uses include transducers with ground-referenced outputs, current sensing, buffering, level shifting within the common-mode range, and general-purpose analog filtering. Each channel provides input and output pins in the same 14-pin SOIC outline, so no external isolation or separate bias circuitry is required for the basic amplifier function.
Design should preserve the input common-mode and output-swing limits, especially near the positive supply rail. Where the signal can approach the upper rail, add headroom or select an amplifier with rail-to-rail output capability. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured conservatively rather than left floating.
This page combines manufacturer specifications with package details, application guidance, drop-in replacement analysis, and practical design notes to support faster component selection and PCB planning.
جێگرەوەکانی جێگۆڕکێ بۆ LM324AMX/NOPB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM324AMX/NOPB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Amplifier Type, Slew Rate, Packaging, Gain-Bandwidth Product.
LM324AM/NOPB
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM324ADG
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM324ADRG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM324DRE4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM324PT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM324AMX/NOPB زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Amplifier Type | Standard (General Purpose) |
| Number of Amplifiers | 4 circuits |
| Supply Voltage Range | 3 V to 32 V |
| Gain-Bandwidth Product | 1 MHz |
| DC Voltage Gain | 100 dB |
| Compensation | Internally frequency compensated for unity gain |
| Input Common-Mode Voltage Range | Includes ground |
| Output Voltage Swing | 0 V to VCC - 1.5 V |
| Supply Type | Single supply |
| مەودای پلەی گەرمیی کارکردن | 0°C to 70°C |
| پاکێج | SOIC (D), 14 pins |
| جۆری دامەزراندن | Surface mount |
| Number of Inputs and Outputs | 8 total, 2 per amplifier channel |
| Lead-Free Status | Lead free |
| دۆخی RoHS | RoHS compliant |
ڕێنمایی ڕێکخستنی پینی LM324AMX/NOPB soic (d), 14 pins
ڕێکخستنی پین بۆ LM324AMX/NOPB (پاکێجی soic (d), 14 pins). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM324AMX/NOPB.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LM324AMX/NOPB گونجاوە بۆ 6 بەکارھێنانs: Ground-Referenced Sensor Signal Conditioning, Battery-Powered Analog Measurement, Industrial Control and Feedback Loops, Audio and Low-Level Analog Buffering, Current Sensing and Load Monitoring, Filter and General-Purpose Analog Stages.
Ground-Referenced Sensor Signal Conditioning
The LM324AMX/NOPB suits sensors whose output is referenced to ground because the input common-mode voltage range includes ground. Its 100 dB large DC voltage gain allows a resistive gain stage to amplify small transducer signals, while the internally compensated topology simplifies unity-gain buffering. With a 3 V to 32 V supply range and approximately 1 MHz gain-bandwidth product, the device covers 5 V and 12 V analog systems. Keep the sensor signal below the positive input limit and add a bias network when the source is bipolar.
پێشنیارکراو
Battery-Powered Analog Measurement
The low-power quad architecture of the LM324AMX/NOPB fits portable measurement equipment requiring several amplified channels from one supply. Four amplifiers in a 14-pin SOIC reduce footprint compared with four separate packages, while operation from 3 V to 32 V supports both low-energy and higher-voltage systems. The input common-mode range includes ground, simplifying sensing of battery-cell and resistive-divider signals. Account for the approximately VCC minus 1.5 V output limit, and verify input bias current and quiescent current against the design's power budget.
پێشنیارکراو
Industrial Control and Feedback Loops
The LM324AMX/NOPB provides four channels for current amplifiers, error amplifiers, actuator drivers, and monitoring loops in industrial control boards. Its 100 dB large DC gain supports accurate closed-loop amplification, while internal compensation for unity gain reduces the feedback complexity of basic servo or regulation loops. The 3 V to 32 V supply range accommodates 24 V industrial systems with suitable signal conditioning, but the output headroom of approximately 1.5 V must remain within the design limit. Stable layout and local supply decoupling are important at higher loop bandwidth.
پێشنیارکراو
Audio and Low-Level Analog Buffering
The LM324AMX/NOPB can buffer or amplify low-level audio and instrumentation signals where approximately 1 MHz gain-bandwidth product and 100 dB large DC gain are adequate. The four-channel SOIC package permits independent left, right, and monitoring paths within a compact circuit. Because the output swings only to approximately VCC minus 1.5 V, headroom must be maintained for waveform peaks, and high-gain operation reduces usable bandwidth. For low-noise or rail-to-rail audio requirements, the LM324 family's compromises should be weighed before final placement.
پێشنیارکراو
Current Sensing and Load Monitoring
The LM324AMX/NOPB is appropriate for amplifying the differential output of a low-side current-sense amplifier before it reaches an ADC or comparator. Its high large-signal DC gain and ground-inclusive input common-mode range support shunt-based measurements, while four channels allow simultaneous sensing of multiple loads. Keep the sense-amplifier output within the input common-mode limits and use the amplifier's approximately 1 MHz bandwidth limit as the start of the complete signal-chain bandwidth budget.
پێشنیارکراو
Filter and General-Purpose Analog Stages
The LM324AMX/NOPB supports passive-feedback filter and analog amplifier stages in instrumentation and test equipment. The four independent channels can implement cascaded gain blocks, active filters, or buffer sections, while internal unity-gain compensation avoids an external compensation capacitor for many closed-loop uses. At approximately 1 MHz gain-bandwidth product, closed-loop bandwidth narrows as noise gain rises, so component selection must account for the intended Q and stability. Decouple the supply pins locally and route feedback traces away from high-impedance input nodes.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM324AMX/NOPB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM324AM/NOPB | LM324ADG | LM324ADRG4 | LM324DRE4 | LM324PT |
|---|---|---|---|---|---|---|
| Package | SOIC-14 (D) | SOIC-14 (D) - same | SOIC-14 (D) - same | SOIC-14 (D) - same | SOIC-14 (D) - same | SOIC-14 (D) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics |
| Amplifier Count | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
جیاکەرەوە سەرەکییەکان
- Four amplifiers in one 14-pin SOIC package (بەراورد بەLM2902DR)
- Higher stated gain-bandwidth product than the cross-brand alternative (بەراورد بەLM324PT)
- Commercial-grade orderable configuration for general industrial use (بەراورد بەLM324ADRG4)
تێبینییەکانی دیزاین
Plan every signal level against the LM324AMX/NOPB output limit of approximately VCC minus 1.5 V. On a 5 V supply, the practical upper output is about 3.5 V, so a design that expects a 5 V swing needs attenuation, a different amplifier, or a larger supply. Also keep negative inputs within the input common-mode range, which includes ground but does not imply operation below the negative rail.
Place the supply bypass capacitor adjacent to the package power and ground pins, and keep the connected copper area as small as practical. Route each inverting-input feedback connection directly to the output through nearby feedback components to minimize parasitic capacitance. High-impedance non-inverting inputs should remain short and away from clock, switching, and digital return paths to reduce injected noise.
Do not assume the LM324AMX/NOPB is rail-to-rail. Its input common-mode range includes ground, while the output needs positive headroom of about 1.5 V. Also confirm the noise gain of each closed-loop stage: unity-gain stability is internally compensated, but higher closed-loop gain reduces bandwidth and can require additional analysis. Unused channels should be tied to a defined, valid potential rather than left floating.
زانیاری پابەندبوون
The component is described as lead free and RoHS compliant. The AMX commercial-temperature version is not presented as an automotive-qualified part; use the appropriate qualified suffix when automotive requirements apply.