Texas Instruments

LM324MX/NOPB - Quad 14-SOIC General-Purpose Amplifier | TI

MPN: LM324MX/NOPB ✓ چالاک
14-SOIC Package
MOQ: 1 |

LM324MX/NOPB گشتی

The Texas Instruments LM324MX/NOPB is a low-power, general-purpose quad operational amplifier packaged in a 14-pin SOIC. It integrates four amplifier channels in one package, making it a practical choice for analog signal conditioning, current-to-voltage conversion, feedback networks, and low-frequency control applications. The device is identified as a Standard (General Purpose) Amplifier with a 4-circuit configuration.

An operational amplifier is an analog building block that compares two input voltages and drives its output toward a higher or lower level. The quad LM324MX/NOPB combines four amplifiers in a single 14-pin SOIC, reducing component count and board area compared with four separate single or dual amplifier packages. Its standard general-purpose classification makes it suitable for designs where cost, supply availability, and straightforward implementation matter.

The principal documented characteristics are the four-channel architecture, the 14-SOIC package, and the 0°C to 70°C commercial-temperature range associated with the Texas Instruments LM324MX family. The /NOPB suffix identifies the standard ordering variant without the NOPB marking used by some other catalog entries. Its low-power architecture suits battery-operated instrumentation, educational electronics, sensor interfaces, and general-purpose analog boards.

In voltage-follower and non-inverting configurations, each amplifier can buffer a sensor output without introducing significant loading. The same buffer function applies to current-to-voltage converters when a sense resistor converts an input current into a measurable voltage. Because all four channels share one package, unused amplifiers can be configured as voltage followers or left unconnected only when their inputs are maintained at valid common-mode voltages.

Typical uses include 4-to-20 mA receiver front ends, analog sensor conditioning, low-cost laboratory instruments, audio preamplifier stages, and general DC gain blocks. The quad arrangement is particularly effective when a board needs several similar channels, such as four sensor inputs, four buffered outputs, or a multichannel measurement interface.

Designers should confirm the full electrical limits, input common-mode range, output swing, input bias current, gain-bandwidth behavior, and supply-current budget in the manufacturer datasheet before release. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be biased within the valid input range rather than left floating. This page combines package details, source-based specifications, drop-in alternatives, and practical design guidance for faster component selection.

جێگرەوەکانی جێگۆڕکێ بۆ LM324MX/NOPB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM324MX/NOPB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Amplifier Type, Operating Temperature Range, Slew Rate, Gain-Bandwidth Product, Number of Channels.

onsemi
Amplifier Type: General Purpose
Slew Rate: 0.6 V/µs
Texas Instruments
Slew Rate: 0.5 V/us
Gain-Bandwidth Product: 1.2 MHz
onsemi
Amplifier Type: Single-supply quad operational amplifier with true differential inputs
Slew Rate: 0.6 V/us
Gain-Bandwidth Product: 1 MHz
Texas Instruments
Operating Temperature Range: 0 °C to 70 °C
Gain-Bandwidth Product: 1 MHz
Texas Instruments
Amplifier Type: Single-supply general-purpose operational amplifier, internally frequency compensated for unity gain
Operating Temperature Range: 0 C to +70 C
Number of Channels: 4

LM324ADRG4

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 14-SOIC
Quadruple operational amplifier · 4 circuits · 1.2 MHz · 0.5 V/us · ±1.5 V · ±16 V · 0.8 mA · Includes ground

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM324ADR2G

✅ جێگرەوەی ڕاستەوخۆ
onsemi
📦 14-SOIC
General Purpose · 4 · 3 V to 32 V · ±1.5 V to ±16 V · 1 MHz · 0.6 V/µs · 3 mV

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM324DG

✅ جێگرەوەی ڕاستەوخۆ
onsemi
📦 14-SOIC
4 channels · Single-supply quad operational amplifier with true differential inputs · 3 V to 32 V · 1 MHz · 0.6 V/us · 5 mV to 7 mV · 65 dB · 14 pins

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM324MX

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 14-SOIC
4 · 4 (quad) · Single-supply general-purpose operational amplifier, internally frequency compensated for unity gain · 3 V to 32 V (or plus or minus 16 V dual supply) · 100 dB · 7 mV · 65 dB

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM324MX

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 14-SOIC
4 · 4 (quad) · Single-supply general-purpose operational amplifier, internally frequency compensated for unity gain · 3 V to 32 V (or plus or minus 16 V dual supply) · 100 dB · 7 mV · 65 dB

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM324MX/NOPB زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Amplifier Type Standard (General Purpose) operational amplifier
Number of Channels 4 channels
Number of Circuits 4 circuits
Package Type 14-SOIC
Package Pin Count 14 pins
جۆری دامەزراندن Surface mount
مەودای پلەی گەرمیی کارکردن 0°C to 70°C
Pb-Free / NOPB /NOPB ordering suffix

ڕێکخستنی پینی LM324MX/NOPB

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پین 1 OUT1 — Amplifier 1 output
پین 2 IN1- — Amplifier 1 inverting input
پین 3 IN1+ — Amplifier 1 non-inverting input
پین 4 V- — Negative supply connection
پین 5 IN2+ — Amplifier 2 non-inverting input
پین 6 IN2- — Amplifier 2 inverting input
پین 7 OUT2 — Amplifier 2 output
پین 8 OUT3 — Amplifier 3 output
پین 9 IN3- — Amplifier 3 inverting input
پین 10 IN3+ — Amplifier 3 non-inverting input
پین 11 V+ — Positive supply connection
پین 12 IN4+ — Amplifier 4 non-inverting input
پین 13 IN4- — Amplifier 4 inverting input
پین 14 OUT4 — Amplifier 4 output

بەکارهێنانە باوەکان

LM324MX/NOPB گونجاوە بۆ 6 بەکارھێنانs: 4-20 mA Receiver Front End, Multi-Sensor Signal Conditioning, Low-Cost Test and Measurement, Battery-Powered Analog Interface, Audio Preamplifier Stages, Educational Electronics and Prototyping.

🏭

4-20 mA Receiver Front End

The LM324MX/NOPB is a practical fit for industrial current-loop receivers because four channels can process multiple 4-20 mA inputs in a single 14-SOIC package. Each amplifier can buffer the voltage developed across a precision burden resistor, adding little loading to the current source. The four-circuit arrangement also allows a transmitter output, a reference voltage, and a temperature channel to share one package. Confirm the input common-mode range, output swing, and supply limits in the manufacturer datasheet, and keep the burden-resistor return path short to reduce conversion error.

🧩

Multi-Sensor Signal Conditioning

Four independent amplifier channels make the LM324MX/NOPB useful for boards that must condition more than one low-frequency sensor output. The device can implement non-inverting gain, inverting gain, active filtering, and impedance buffering on its four channels without requiring four separate packages. A 0°C to 70°C commercial-temperature range fits indoor controls, test fixtures, and commercial monitoring equipment. Sensor excitation, calibration, and ground-reference design remain application-specific; verify offset voltage, bias current, and gain-bandwidth requirements before selecting the gain network.

🖥️

Low-Cost Test and Measurement

The LM324MX/NOPB can build voltage followers, differential amplifiers, integrators, and elementary active filters for educational and laboratory instrumentation. Its four channels allow one instrument to provide a buffered sensor input, a gain stage, an active filter, and an output driver. The 14-SOIC package simplifies assembly on a single-sided or mixed-technology prototype board. For precision measurement, validate input offset, input bias current, noise, and long-term drift against the required accuracy instead of relying only on the general-purpose designation.

🔋

Battery-Powered Analog Interface

The LM324MX/NOPB's low-power general-purpose architecture is suitable for battery-operated measurement and control boards where four buffered channels justify one package. A quad device can reduce the package count versus separate single amplifiers, helping conserve board area and simplify power distribution. Place supply-bypass capacitors close to the package supply connections, evaluate the total quiescent-current budget, and use the enable or shutdown control of the surrounding system to remove unused channels from the power budget where practical.

🎧

Audio Preamplifier Stages

The LM324MX/NOPB can provide low-frequency preamplification and gain stages in audio mixer, intercom, and active-speaker designs operating within its common-mode and output limits. Four channels support balanced inputs, microphone-style conditioning, or multiple volume-controlled paths while retaining a single package footprint. The trade-off is that the LM324 family is intended for general-purpose rather than high-precision audio performance, so noise, slew rate, and output-driving capability should be checked against the audio bandwidth and load impedance before final selection.

🔧

Educational Electronics and Prototyping

The LM324MX/NOPB is well suited to university laboratories, electronics training boards, and maker projects because it provides four familiar amplifier functions in a widely used 14-SOIC package. Students can assign the four channels to voltage followers, inverting amplifiers, integrators, and comparators without soldering multiple packages. Its general-purpose characteristics simplify initial prototyping, although production designs still require checks for input bias current, output swing, thermal behavior, and supply-noise coupling. Use a common ground plane and short feedback traces to minimize measurement errors.

What is the LM324MX/NOPB?
The LM324MX/NOPB is a Texas Instruments low-power, general-purpose quad operational amplifier in a 14-pin SOIC package. It provides four amplifier channels in one IC, allowing a compact board to implement several analog functions without using separate amplifier packages. Texas Instruments describes the device as a Standard (General Purpose) Amplifier with a 4-circuit configuration, making it appropriate for general analog conditioning and buffer applications.
How many amplifiers are in the LM324MX/NOPB?
The LM324MX/NOPB contains four operational amplifiers. All four channels share the same 14-SOIC package, and the Texas Instruments catalog identifies it as a 4-circuit amplifier. This configuration is useful when a design needs several matched functional blocks, such as four sensor buffers, four analog gain stages, or a mixture of filtering, buffering, and current-to-voltage conversion channels.
What package does the LM324MX/NOPB use?
The LM324MX/NOPB uses a 14-pin SOIC surface-mount package. Texas Instruments lists the part as a 4-circuit amplifier in 14-SOIC packaging, and the manufacturer datasheet pin-description table defines the package connections. When planning a PCB replacement, confirm the land pattern, pin-1 orientation, and exposed-pad requirement against the package drawing in the manufacturer datasheet.
Where can I download the LM324MX/NOPB datasheet PDF?
The official LM324MX/NOPB documentation is available through the Texas Instruments LM324 product page, which links to the family datasheet and ordering information. Use the manufacturer document for the final pin-description table, recommended operating conditions, electrical characteristics, and application guidance. The third-party AllDataSheet page in the search results can also provide an archived copy of the National Semiconductor and Texas Instruments documentation.
Where can I find the LM324MX/NOPB pinout?
The LM324MX/NOPB pinout is identified in the manufacturer datasheet pin-description table for the 14-SOIC package. The standard quad-amplifier arrangement assigns the four outputs, eight differential inputs, and the supply and ground connections across 14 pins. Use that table when routing PCB tracks, and follow the pin-1 marker shown on the 14-SOIC outline rather than relying on PCB artwork alone.
What is the operating temperature range of the LM324MX/NOPB?
The Texas Instruments LM324MX family is cataloged for a 0°C to 70°C operating temperature range. The LM324MX/NOPB is the standard commercial-temperature ordering variant. If the enclosure, supply rails, or operating environment exceed that range, select an extended-temperature grade rather than treating the commercial grade as a full-temperature industrial part.
Can the LM324MX/NOPB be used as a voltage buffer?
Yes, the LM324MX/NOPB can be used as a voltage buffer by connecting each amplifier's inverting input to its output and applying the source signal to the non-inverting input. Buffering isolates a high-impedance sensor or divider from the next stage. Confirm the input common-mode range and output swing in the manufacturer datasheet before using this configuration near the supply rails.
Is the LM324MX/NOPB suitable for 4-20 mA current sensing?
The LM324MX/NOPB is suitable for many 4-20 mA receiver front ends when the burden-resistor voltage stays inside the amplifier's input and output ranges. Each channel can buffer or amplify a voltage generated across a precision burden resistor. Check common-mode voltage, output swing, supply voltage, and precision requirements in the manufacturer datasheet before releasing the design.
What are the key specifications of the LM324MX/NOPB that engineers should know?
The key documented specifications are four amplifier channels, a 14-SOIC surface-mount package, a low-power general-purpose architecture, and a 0°C to 70°C operating range. Texas Instruments also identifies the part as a Standard (General Purpose) 4-circuit amplifier. Detailed voltage limits, offset, bandwidth, slew rate, bias current, and output-current values should be taken directly from the manufacturer datasheet for the selected ordering variant.
What can replace the LM324MX/NOPB?
A replacement should provide four op-amp channels in the same 14-SOIC footprint with compatible input, output, and supply limits. The LM324ADRG4, LM324ADR2G, LM324DG, and the ROHM LM324MX are documented SOIC-14 candidates for cross-reference review. Confirm pin assignment, supply range, common-mode range, output swing, and temperature grade in each manufacturer's datasheet before treating any candidate as a drop-in substitute.
Is the LM324MX/NOPB the same as the LM324MX?
The LM324MX/NOPB and LM324MX refer to closely related catalog entries for the Texas Instruments LM324 quad-amplifier family in 14-SOIC packaging, but the exact ordering codes and suffix details must be checked on the purchase documents. Both listings identify a 4-circuit 14-SOIC general-purpose amplifier. Verify the full suffix, temperature grade, and packaging requirement before substituting one code for the other.
What is the best ROHM equivalent for the LM324MX/NOPB?
The ROHM LM324MX is a documented cross-brand candidate because it is also a low-power quad general-purpose operational amplifier in a 14-pin package, with a catalog description of plus or minus 16 V or 32 V total supply operation. Verify pin-to-pin alignment and the exact maximum supply condition, output swing, slew rate, and temperature grade in the ROHM datasheet before substituting it on an existing board.
When should I choose the LM324MX/NOPB instead of a single-amplifier package?
Choose the LM324MX/NOPB when the design needs two to four amplifier channels and can use one shared 14-SOIC package. It reduces component count, simplifies sourcing, and can lower board-level assembly cost. Use single or dual amplifier packages instead when independent power control, isolated grounds, very different temperature grades, or wide physical spacing between channels are required.
When should I choose the LM324MX/NOPB over a rail-to-rail amplifier?
Choose the LM324MX/NOPB for conventional, cost-sensitive analog designs that operate within the amplifier's specified common-mode and output ranges. Rail-to-rail input and output stages are preferable when signals approach the supply rails, when a low-side sensor output must be measured near ground, or when the design needs a rail-to-rail output swing. The trade-off is that the LM324MX/NOPB is not specified as a rail-to-rail amplifier.
Is the LM324MX/NOPB in stock, and what does it cost?
Current inventory and commercial terms change frequently and are best confirmed for the exact suffix and shipping quantity. Use the Request a Quote form on this page to ask for current availability, lot traceability, and a quantity-based quotation. The search listings identify the LM324MX/NOPB as a 14-SOIC Texas Instruments quad amplifier, so the inquiry should identify that complete manufacturer part number.

داتای سەرچاوەی ئەندازیاری بۆ LM324MX/NOPB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the LM324MX/NOPB when a commercial-temperature design needs four general-purpose amplifiers in one 14-SOIC package, especially for sensor buffering, 4-20 mA receivers, laboratory instrumentation, or teaching circuits. The Texas Instruments LM324ADRG4, LM324ADR2G, and LM324DG are closely related 14-SOIC candidates when a different ordering code or qualification route is required, but their exact suffix and full ratings must be checked. The Texas Instruments LM324MX can be considered when its exact catalog conditions match the required order code. For cross-brand sourcing, the ROHM LM324MX offers the same quad-amplifier and 14-pin format, yet its internal device characteristics and temperature grade must be validated. Choose a rail-to-rail amplifier instead when the signal can approach the supply rails, and choose precision or low-offset devices when measurement accuracy outweighs cost and simplicity.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LM324ADRG4 LM324ADR2G LM324DG LM324MX LM324MX
Manufacturer Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments ROHM Semiconductor
Package 14-SOIC 14-SOIC - same 14-SOIC - same 14-SOIC - same 14-SOIC - same 14-SOIC - same
Number of Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Number of Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 channels
Product Class Standard (General Purpose) amplifier LM324 general-purpose amplifier LM324 general-purpose amplifier LM324 general-purpose amplifier Low-power general-purpose quad amplifier Low-power quad general-purpose amplifier
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount
Pin Count 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins

جیاکەرەوە سەرەکییەکان

  • Four general-purpose amplifier channels in one 14-SOIC package (بەراورد بەLM324ADRG4)
  • Commercial-temperature ordering option for general-purpose analog designs (بەراورد بەROHM LM324MX)
  • Compact four-channel integration reduces package count (بەراورد بەLM2902DR)

تێبینییەکانی دیزاین

Do not leave unused amplifier inputs floating. Tie each unused non-inverting input to a defined potential within the valid input common-mode range and connect its inverting input appropriately so the amplifier remains in a stable operating state. This prevents input-offset drift, oscillation, and unexpected output transients. Confirm the permitted input and output states against the manufacturer datasheet before finalizing the schematic.

Place the supply-bypass capacitor immediately adjacent to the device supply pins and use a short return path to the device ground. Route each feedback loop as a compact closed path around its amplifier, and avoid routing input signals beneath or immediately beside high-current switching nodes. The 14-SOIC footprint simplifies assembly, but analog performance still depends on grounding and return-current control.

Check the source impedance seen by each non-inverting input against the application requirements for bias-current error and noise gain. High-impedance sensor nodes may need guarding, a nearby reference return, or a lower-bias-current amplifier. For 4-20 mA receivers, keep the burden-resistor connection compact and verify that the resulting voltage remains inside the amplifier's common-mode range.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The /NOPB ordering suffix identifies a lead-free ordering variant, but formal RoHS, REACH, halogen-free, and conflict-minerals statements are not explicitly stated for this exact listing and remain unconfirmed.

داتا پشتڕاستکراوەتەوە لە: 2026-11-06 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

lm324mx nopb lm324mx datasheet LM324MX/NOPB datasheet PDF LM324MX/NOPB pinout LM324MX/NOPB 14-SOIC Texas Instruments LM324MX/NOPB LM324MX/NOPB quad amplifier LM324MX/NOPB replacement LM324MX/NOPB equivalent LM324MX/NOPB vs LM324ADRG4 LM324MX/NOPB 4-20 mA amplifier LM324MX/NOPB buffer application LM324MX/NOPB price LM324MX/NOPB stock LM324MX/NOPB schematic

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments LM324MX/NOPB LM324MX LM324ADRG4 LM324ADR2G LM324DG ROHM Semiconductor quad operational amplifier general-purpose amplifier low-power amplifier analog IC integrated circuit semiconductor 14-SOIC SOIC package family surface-mount package voltage follower current-to-voltage conversion 4-20 mA receiver sensor signal conditioning active filter input common-mode range output voltage swing quiescent current RoHS REACH AEC-Q100
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ