LM339DR2G - 4-Channel 3-36V Comparator | onsemi
MPN: LM339DR2G ✓ چالاکLM339DR2G گشتی
A comparator is an analog signal-conditioning semiconductor that compares two input voltages and produces a logic-level output indicating their relationship. The LM339 family combines four independent channels in one package, placing the comparator function within the broader hierarchy of analog integrated circuits, interface ICs, and signal-processing semiconductors.
Key features include four independent comparators, 3 V to 36 V single-supply operation, 1.3 us response time, 25 nA typical input bias current, and ±5 nA typical input offset current. Its open-collector outputs support wired logic and pull-up-resistor applications, while the specified CMOS and TTL compatibility allows connection to a broad range of digital control systems.
The LM339 architecture is suited to threshold monitoring rather than precision signal amplification. Each channel compares its non-inverting and inverting inputs, allowing the output state to change when the differential input crosses the switching threshold. Low input bias current reduces disturbance of high-impedance sensing networks, while the wide supply range accommodates both low-voltage logic and higher-voltage industrial systems.
Typical uses include sensor threshold detection, battery and power-supply monitoring, overvoltage and undervoltage protection, window comparison in control systems, logic-level translation, and memory or interface testing. The comparator can also serve as a simple relay-driver front end when its open-collector output is paired with an appropriate pull-up and external transistor stage.
PCB design should keep comparator inputs and feedback components away from switching-current paths and high-impedance nodes. Place bypass capacitors close to the supply pins, use a stable pull-up resistor on every open-collector output, and check input common-mode limits at the minimum and maximum supply voltages before finalizing the layout.
This page consolidates the LM339DR2G operating limits, pin assignment, drop-in comparisons, application guidance, and practical layout considerations to support faster component selection, sourcing, and circuit implementation.
جێگرەوەکانی جێگۆڕکێ بۆ LM339DR2G — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM339DR2G (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Comparator Type, Logic Compatibility, Package, Input Bias Current, Number of Channels.
LM339DT
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM339ANSRG4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM339ADR
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM339DR
✅ جێگرەوەی ڕاستەوخۆ✓ بەردەستە
$0.0738 / یەکە
بینینی داتاشیت →LM2901DR
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM239DR2
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM339DR2G زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Comparator Type | General Purpose |
| Number of Comparators | 4 channels |
| Supply Voltage Range | 3 V to 36 V |
| Supply Configuration | Single |
| Response Time | 1.3 us |
| Input Bias Current | 25 nA typical |
| Input Offset Current | ±5 nA typical |
| ئێستای دابینکردن | 1 mA typical |
| جۆری دەرچوون | Open Collector |
| Output Compatibility | CMOS and TTL |
| ژمارەی پینەکان | 14 pins |
| پاکێج | 14-SOIC |
| جۆری دامەزراندن | Surface mount |
| Temperature Grade | Commercial |
ڕێکخستنی پینی LM339DR2G
| پین 1 | 1OUT — Comparator 1 open-collector output |
| پین 2 | 1IN- — Comparator 1 inverting input |
| پین 3 | 1IN+ — Comparator 1 non-inverting input |
| پین 4 | GND — Ground reference |
| پین 5 | 2IN+ — Comparator 2 non-inverting input |
| پین 6 | 2IN- — Comparator 2 inverting input |
| پین 7 | 2OUT — Comparator 2 open-collector output |
| پین 8 | 3OUT — Comparator 3 open-collector output |
| پین 9 | 3IN- — Comparator 3 inverting input |
| پین 10 | 3IN+ — Comparator 3 non-inverting input |
| پین 11 | VCC — Positive supply connection |
| پین 12 | 4IN+ — Comparator 4 non-inverting input |
| پین 13 | 4IN- — Comparator 4 inverting input |
| پین 14 | 4OUT — Comparator 4 open-collector output |
بەکارهێنانە باوەکان
LM339DR2G گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Threshold Detection, Power-Supply Overvoltage Detection, Battery Voltage Monitoring, Automotive Control-System Interfacing, Logic-Level Translation and Interfacing, Window Comparison and Control Systems.
Industrial Sensor Threshold Detection
The LM339DR2G fits industrial sensor threshold detection because four independent channels can monitor separate analog signals within one 14-SOIC package. Its 25 nA typical input bias current reduces disturbance of high-impedance sensing networks, while the 1.3 us response time supports alarm, limit, or switching functions that do not require high-speed comparator performance. Configure each channel with suitable hysteresis to prevent chatter around the threshold, and operate the 3 V to 36 V supply range only when all input voltages remain inside the device's specified common-mode limits.
پێشنیارکراو
Power-Supply Overvoltage Detection
The LM339DR2G can supervise a power rail by comparing a divided feedback voltage with a reference and driving an open-collector protection signal. The 3 V to 36 V operating range supports low-voltage logic through higher industrial rails, while the 1.3 us response time provides rapid fault signaling. Use a resistor divider that limits input loading, add suitable filtering for switch-node noise, and select a pull-up resistor based on the required logic level and input current. The open-collector output can also drive an external shutdown transistor rather than carrying the protected load directly.
پێشنیارکراو
Battery Voltage Monitoring
The LM339DR2G is appropriate for battery-pack monitoring because its wide 3 V to 36 V single-supply range accommodates multiple cell voltages and industrial battery systems. Four channels can compare different pack voltages against scaled references, providing early warning for overvoltage or undervoltage conditions. The 25 nA typical input bias current helps preserve battery life when the sensing network uses high-value resistors. Because each output is open collector, it can pull down a shared fault line or drive a low-current status indicator through a suitable pull-up while keeping the protected battery path electrically isolated.
پێشنیارکراو
Automotive Control-System Interfacing
The LM339DR2G can support low-level sensing and interface functions in automotive control systems when the board design complies with the applicable temperature and qualification requirements for that vehicle platform. Four channels provide economical threshold comparison, and the 1.3 us response time is suitable for many control and status signals. The open-collector output supports wired logic with an external pull-up, while CMOS and TTL compatibility simplifies interfacing with digital control circuitry. Final automotive use requires confirmation of the exact device grade, operating-temperature limits, qualification status, and electrical characteristics for the vehicle platform.
پێشنیارکراو
Logic-Level Translation and Interfacing
The LM339DR2G can act as a simple open-collector logic interface when one side of a system uses a voltage different from the pull-up rail. Because the output transistor only pulls the node down, the logic-high level is established by the external pull-up resistor, allowing flexible voltage-domain interfacing. The 1.3 us response time accommodates ordinary control signals, and the 3 V to 36 V supply range supports a wide variety of pull-up levels. Ensure that every input and output remains within its absolute-maximum and common-mode limits, and choose the pull-up value to balance speed, power, and the sink-current capability of the output.
پێشنیارکراو
Window Comparison and Control Systems
The LM339DR2G supports window comparison when two channels detect the upper and lower limits of an analog control signal. The non-inverting and inverting inputs of each channel can receive divided versions of the measured voltage and separate reference levels, creating an upper-limit signal, lower-limit signal, or combined state indication. The low 25 nA typical input bias current minimizes errors in high-impedance dividers, while the 1.3 us response time is ample for many process-control loops. Add positive feedback for hysteresis where chatter near either limit could cause repeated switching of an actuator or downstream controller.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM339DR2G — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM339DT | LM339ANSRG4 | LM339ADR | LM339DR | LM2901DR | LM239DR2 |
|---|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | Texas Instruments | Texas Instruments | Texas Instruments | Motorola Mobility LLC |
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Number of Comparators | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Output Type | Open Collector | Open Collector | Open Collector | Open Collector | Open Collector | Open Collector | Open Collector |
جیاکەرەوە سەرەکییەکان
- Four independent comparator channels in one 14-SOIC package (بەراورد بەLM2901DR)
- Low input bias current supports high-impedance sensing (بەراورد بەLM239DR2)
- Wide single-supply operating range (بەراورد بەLM339ADR)
- Directly listed 14-SOIC family alternatives (بەراورد بەLM339DR)
تێبینییەکانی دیزاین
Place the supply bypass capacitor directly between pins 11 and 4, with its ground connection returned through the shortest practical path. Keep the four comparator channels' input traces away from switching nodes, relay coils, and high-current return paths. Because open-collector outputs need pull-up resistors, route those outputs to the receiving logic without unnecessary stubs, and place each pull-up close to the driven load when edge speed matters.
Do not treat the open-collector output as a push-pull CMOS output. Every output requires a pull-up resistor when driving a digital input, and its sink current must remain within the device's output-current limit. Also check both inputs against the common-mode range at the minimum and maximum supply voltage. The 25 nA typical input bias current is useful with high-impedance sensors, but resistor-divider errors and input leakage still need to be included in threshold calculations.
Add positive feedback or deliberate input separation when noise near the switching threshold could cause repeated output transitions. Place threshold-setting resistors close to the associated input pins, keep the reference node away from noisy supply traces, and use a separate local ground return for sensitive divider nodes. The 1.3 us response time is suitable for ordinary threshold events, but it does not remove the need for analog filtering when the monitored signal contains high-frequency ripple.
Verify the exact temperature grade and qualification requirements before assigning the LM339DR2G to an automotive, industrial, or extended-temperature design. The commercial LM339 family is widely used for level detection and low-level sensing, but an open-collector output has a limited sink-current capability. Use an external transistor or driver when the output must control a relay, high-current LED, motor, or other load rather than only a logic gate.
زانیاری پابەندبوون
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact ordering code.