LM358H - Dual Low-Power Operational Amplifier | Texas Instruments
MPN: LM358H ✓ چالاکLM358H گشتی
An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. The LM358H uses two independent sections in one package, allowing one physical component to implement two amplification or buffering functions. This can reduce board area compared with two single-amplifier packages while retaining the simple through-hole construction associated with the TO-99-8 format. Its low-power design is useful where supply consumption must remain modest but general-purpose analog signal conditioning is still required.
The verified data identifies the LM358H as a low-power dual operational amplifier. Its two-circuit configuration supports applications such as sensor signal conditioning, voltage amplification, comparator-style thresholding, audio preamplification, and general feedback-control blocks. The through-hole TO-99-8 package is particularly suitable for prototypes, legacy industrial equipment, educational platforms, and repair applications where a socketed or leaded component is easier to install than a fine-pitch surface-mount package. Detailed electrical limits must be confirmed against the manufacturer datasheet for the specific voltage, temperature, and production source used in the design.
The LM358H family is historically associated with operation from a single power supply over a wide voltage range. Its general-purpose architecture is intended for use in both single-supply and split-supply analog systems. In a single-supply circuit, the signal and reference input levels must remain within the amplifier's common-mode input range; in a dual-supply circuit, the ground reference can be placed near the midpoint between the positive and negative rails. Exact offset, bandwidth, slew-rate, output-swing, and supply-current limits are not present in the supplied source snippets and therefore require confirmation in the manufacturer datasheet.
Typical uses include low-level sensor interfaces, industrial controllers, audio mixer stages, active filters, and general DC signal-conditioning boards. The dual section can amplify one signal while the other provides an active filter, buffer, or comparator function. Because the LM358H is a through-hole device, it is also appropriate for educational and maintenance work where PCB rework is undesirable. Designers should still verify input bias-current behavior, output-current capability, and stability with the external compensation and load conditions used in the target circuit.
The primary design consideration is to verify the exact electrical envelope before replacement. Although LM358-family devices share a common functional concept, orderable variants can differ in manufacturer, temperature grade, package, qualification, and tested parameters. The TO-99-8 package must match the original PCB footprint, and the replacement amplifier's common-mode range and output-swing limits must support the intended signal. Decoupling close to the supply pins and a stable feedback network are essential for reliable operation.
This product record combines the verified LM358H package and device descriptions with a practical drop-in comparison table, sourcing guidance, application examples, and design notes. These resources help engineers identify whether the LM358H matches an existing TO-99-8 design while highlighting which specifications still require direct review of the manufacturer datasheet before procurement or production release.
جێگرەوەکانی جێگۆڕکێ بۆ LM358H — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM358H (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Gain-Bandwidth Product, Manufacturer, Package.
LM158H
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM258H
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →LM2904H
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MC1458H
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
TLE2072H
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
LM358H زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Amplifier Circuits | 2 circuits |
| Supply Type | Single supply; split-supply operation possible |
| Low-Power Classification | Low power |
| پاکێج | TO-99-8 |
| ژمارەی پینەکان | 8 pins |
| شێوازی دامەزراندن | Through hole |
| Manufacturer | National Semiconductor |
ڕێنمایی ڕێکخستنی پینی LM358H to-99-8
ڕێکخستنی پین بۆ LM358H (پاکێجی to-99-8). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM358H.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LM358H گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Signal Conditioning, Audio Preamplifier and Active Filter, Low-Voltage Comparator Thresholding, Power Supply Feedback and Monitoring, Data Acquisition Front End, Educational and Legacy Equipment Repair.
Industrial Sensor Signal Conditioning
The LM358H fits industrial sensor-conditioning circuits that require two general-purpose amplifier sections and accept a leaded TO-99-8 package. One section can amplify a low-level sensor signal while the other can create a reference, gain stage, or active filter. The through-hole construction simplifies installation in control panels, legacy machinery, and prototype boards where surface-mount assembly is unavailable. The key design condition is that the selected amplifier’s common-mode input range and output swing must cover the sensor and supply limits. The supplied snippets confirm a dual, low-power general-purpose device but do not provide complete offset, bias-current, or bandwidth figures, so those values must be checked in the National Semiconductor datasheet before setting gain or choosing resistor values.
پێشنیارکراو
Audio Preamplifier and Active Filter
The LM358H can support general-purpose audio preamplifier, mixer, and active-filter positions when the circuit remains within the amplifier’s verified bandwidth, noise, common-mode, and output-swing limits. Its two independent channels allow a signal amplifier and a buffer or filter to share one TO-99-8 package, which may simplify a through-hole prototype. The LM358H is not automatically suitable for high-fidelity applications because the provided sources do not quantify input noise, distortion, bandwidth, or slew rate. Engineers should compare those parameters with the source resistance, load, signal level, and filter gain. A practical benefit is the ability to prototype and service audio boards without fine-pitch surface-mount tooling.
پێشنیارکراو
Low-Voltage Comparator Thresholding
The LM358H is applicable to comparator-style threshold detection when open-loop behavior, output saturation, input common-mode range, and propagation delay are acceptable for the circuit. Its two amplifier sections can monitor two thresholds or provide a threshold stage plus an output-conditioning stage. Because a general-purpose operational amplifier may saturate and recover more slowly than a purpose-built comparator, the LM358H is better suited to low-rate control signals than precise high-speed event detection. The through-hole TO-99-8 package supports repairable laboratory and industrial control boards. Before deployment, verify the output-level behavior, supply range, and input limits in the manufacturer datasheet because those numerical details are absent from the supplied search snippets.
پێشنیارکراو
Power Supply Feedback and Monitoring
The LM358H can be used in power-supply feedback, current-sense, or rail-monitoring circuits because it combines two independent general-purpose amplifier sections in one package. One section may amplify a scaled feedback signal, while the other can buffer a reference or monitor another rail. The important engineering checks are input offset, input bias current, output-current capability, common-mode range, and stability with the power-stage compensation network. None of those complete electrical limits is exposed in the supplied distributor snippets, so the data sheet must be used to establish resistor values and operating headroom. The TO-99-8 format is especially useful for high-voltage prototype boards and maintenance assemblies where adequate clearance and appropriate component voltage ratings must be maintained.
پێشنیارکراو
Data Acquisition Front End
The LM358H is suited to basic data-acquisition front ends where two low-power amplifier stages can condition inputs from sensors or resistive dividers. The through-hole TO-99-8 package is convenient for laboratory instrumentation, educational platforms, and legacy measurement equipment. Its suitability depends on the sensor’s output range and the required measurement accuracy: the amplifier must remain inside its input common-mode range, provide adequate output swing, and have offset and bias characteristics compatible with the resolution being attempted. The supplied sources do not expose noise, input capacitance, settling-time, or common-mode values. Consequently, designers should avoid setting high precision solely from the low-power label and instead derive the complete signal-chain budget from the manufacturer datasheet.
پێشنیارکراو
Educational and Legacy Equipment Repair
The LM358H is particularly practical for educational circuits and legacy equipment repair because it combines a through-hole TO-99-8 package with two general-purpose amplifier sections. Technicians can inspect, socket, replace, and troubleshoot the device using conventional through-hole assembly methods rather than surface-mount rework equipment. The package also allows the two sections to implement separate amplifier, buffer, comparator, or active-filter functions in a compact eight-lead component. A replacement should still be checked for pin numbering and electrical limits because package drawing similarity does not prove exact equivalence. The verified distributor page confirms the TO-99-8 two-circuit classification, while detailed operating ranges remain available only from the manufacturer datasheet and must be consulted before energizing a repaired board.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM358H — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM158H | LM258H | LM2904H | MC1458H | TLE2072H |
|---|---|---|---|---|---|---|
| Package | TO-99-8 | TO-99-8 - same | TO-99-8 - same | TO-99-8 - same | TO-99-8 - same | TO-99-8 - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | onsemi | Texas Instruments |
| Amplifier Configuration | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier |
| Number of Pins | 8 pins | 8 pins | 8 pins | 8 pins | 8 pins | 8 pins |
| Mounting Style | Through hole | Through hole | Through hole | Through hole | Through hole | Through hole |
جیاکەرەوە سەرەکییەکان
- Original LM358-family identity in a verified TO-99-8 configuration (بەراورد بەLM358N)
- Two independent general-purpose amplifier sections in one package (بەراورد بەMC1458H)
- Same-family replacement path with explicit comparison context (بەراورد بەLM2904H)
تێبینییەکانی دیزاین
Do not substitute LM358N or another LM358-family orderable code solely because it is electrically similar. The verified target is TO-99-8, whereas DIP-8 and SOIC-8 versions have different lead spacing, body dimensions, and PCB footprints. Confirm the physical outline, pin-1 orientation, and every amplifier pin before ordering a replacement. Also verify supply voltage, common-mode input range, output swing, temperature grade, and offset limits against the original manufacturer datasheet.
Provide local supply bypassing and maintain a low-impedance ground return around the amplifier. Place the relevant bypass capacitor close to the supply and ground pins, route feedback components away from noisy switching nodes, and use a stable feedback network. The supplied excerpts do not state the manufacturer’s recommended capacitance values, so capacitor selection should follow the LM358H datasheet and the actual supply impedance rather than an assumed universal value.
Check input common-mode voltage and output swing under the minimum and maximum supply conditions before using either amplifier section. In a single-supply design, bias the signal around a suitable mid-supply reference only if that reference remains inside the verified common-mode range. Confirm output-current demand with the specified load because general-purpose operational amplifiers can enter current limiting or nonlinear output behavior outside their recommended operating region.
Power dissipation in a TO-99-8 package depends on the complete electrical limits, which are not available in the supplied excerpts. Before using the device at elevated supply voltage or high output current, calculate worst-case dissipation from the actual load and rail difference, compare it with the package thermal rating, and account for ambient temperature and lead length. Use a socket only if its contact resistance and thermal performance are suitable for the intended current.
زانیاری پابەندبوون
The supplied PDF snippet references National Semiconductor packaging specifications CSP-9-111C2 and CSP-9-111S2 and states that the packaging contains no substances banned under CSP-9-111S2. It does not explicitly establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the target, so those fields remain unknown.