MAX232EIN - 5V RS-232 Transceiver | Texas Instruments | DIP-16
MPN: MAX232EIN ✓ چالاکMAX232EIN گشتی
A transceiver combines the functions of an RS-232 line driver and line receiver in one integrated circuit. In the broader semiconductor hierarchy, the MAX232EIN belongs to the interface IC class, where communication between systems with different voltage levels is handled by level-shifting and signal-conditioning devices. Its integrated charge-pump voltage generator allows the device to produce the positive and negative RS-232 voltages required by the standard from a single 5 V supply.
The MAX232EIN is designed for 250 kbps data rates and uses on-chip protection against electrostatic discharge. Its integrated protection is identified in the product description as IEC 61000-4-2 protection, making it useful for industrial equipment, communications equipment, and other systems where an RS-232 connector may be exposed to user-contact transients. The 16-pin PDIP package is suitable for through-hole PCB layouts and hand-assembled prototypes.
The device is used when a controller, terminal, printer, instrument, or another embedded system must communicate through an RS-232 port. Each receiver converts an RS-232 input to a logic-compatible signal, while each driver converts a logic input into an RS-232 output. The internal charge-pump circuit supplies the bipolar voltage levels required by the RS-232 interface without a separate negative power supply.
For robust board implementation, place the charge-pump capacitors close to their associated pins and route the transmit and receive traces away from sensitive analog or high-speed digital signals. Decoupling capacitors should be located near the supply pins, and the external connector should include the required RS-232 signal-ground reference. The MAX232EIN is most appropriate when a single 5 V supply, a compact dual-channel interface, and a legacy RS-232 connection are required.
This page combines the manufacturer device description with package information, drop-in comparison options, application guidance, and design notes for engineers selecting or replacing the MAX232EIN. The listed alternatives are limited to verified same-package choices; no cross-package RS-232 devices are presented as drop-in replacements.
جێگرەوەکانی جێگۆڕکێ بۆ MAX232EIN — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX232EIN (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Mounting Type, Package, Supply Voltage Range, Maximum Data Rate, Data Rate.
MAX232ECN
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX232NE4
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →MAX232EJE
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MAX232EIN تایبەتمەندییەکان
| Product Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V |
| Maximum Data Rate | 250 kbps |
| پاکێج | 16-pin PDIP |
| جۆری دامەزراندن | Through Hole |
| Logic Compatibility | TTL/CMOS |
| ESD Protection Standard | IEC 61000-4-2 |
| Charge Pump | Integrated |
| ژمارەی پینەکان | 16 |
| مەودای پلەی گەرمیی کارکردن | -40 C to +85 C |
ڕێکخستنی پینی MAX232EIN
| پین 1 | RIN1 — Receiver input 1 |
| پین 2 | RIN2 — Receiver input 2 |
| پین 3 | RIN3 — Receiver input 3 |
| پین 4 | RIN4 — Receiver input 4 |
| پین 5 | OUT4 — Receiver output 4 |
| پین 6 | OUT3 — Receiver output 3 |
| پین 7 | OUT2 — Receiver output 2 |
| پین 8 | OUT1 — Receiver output 1 |
| پین 9 | GND — Ground |
| پین 10 | V+ — Charge-pump capacitor connection |
| پین 11 | V- — Charge-pump capacitor connection |
| پین 12 | VCC — Supply voltage |
| پین 13 | T1OUT — Transmitter output 1 |
| پین 14 | T2OUT — Transmitter output 2 |
| پین 15 | T3OUT — Transmitter output 3 |
| پین 16 | T4OUT — Transmitter output 4 |
بەکارهێنانە باوەکان
MAX232EIN گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Port Interface, RS-232 Terminal and Printer Interface, Instrumentation and Test Equipment, Data Acquisition Systems, Embedded Console and Configuration Port, Remote Control and Monitoring Links.
Industrial Serial Port Interface
The MAX232EIN fits industrial serial-port interfaces because it combines two drivers, two receivers, a 4.5 V to 5.5 V supply range, and a 250 kbps data rate in one 16-pin PDIP package. Place it between a controller UART and a DB9 or terminal connector, then use the integrated charge-pump section to generate the bipolar RS-232 levels from one 5 V rail. IEC 61000-4-2 protection adds useful transient tolerance at the interface, although the finished equipment still needs appropriate grounding and enclosure-level surge protection.
پێشنیارکراو
RS-232 Terminal and Printer Interface
The MAX232EIN is suitable for connecting a UART-based controller to a legacy RS-232 terminal or printer because it provides the required logic-to-RS-232 conversion in both directions. Two transmit channels can handle separate control and data lines, while two receive channels support status feedback. Its maximum 250 kbps rate is more than adequate for conventional character-oriented serial traffic, and the PDIP format is convenient for prototypes and through-hole industrial-control boards.
پێشنیارکراو
Instrumentation and Test Equipment
The MAX232EIN can connect laboratory instruments and test equipment to a computer or embedded test controller when the equipment retains an RS-232 service port. The integrated dual driver/receiver arrangement reduces the number of interface components required for bidirectional communication. A 5 V system architecture can use the MAX232EIN directly because the internal charge-pump circuit creates the positive and negative RS-232 voltages. Place the device near the connector and include local supply bypassing to limit coupling between the interface converter and sensitive measurement circuitry.
پێشنیارکراو
Data Acquisition Systems
The MAX232EIN is appropriate for data-acquisition equipment that must export measurements through an RS-232 link to a host computer. Two receive channels can accept commands or status signals, while two driver channels can provide separate output paths for data and control information. The device supports operation from 4.5 V to 5.5 V and data rates up to 250 kbps, matching many legacy acquisition systems. For electrically long or noisy cables, keep the ground reference connected and evaluate whether an isolated interface is more appropriate.
پێشنیارکراو
Embedded Console and Configuration Port
The MAX232EIN is useful for an embedded console where a processor exposes a service configuration port over RS-232. The two-channel structure permits separate command and response paths, simplifying firmware flow control without adding another level-conversion package. Because the device is specified for 250 kbps and includes ESD protection identified as IEC 61000-4-2, it is a practical fit for service ports exposed during installation or maintenance. Firmware should still define timeout, framing, and reset behavior for disconnected or partially connected cables.
پێشنیارکراو
Remote Control and Monitoring Links
The MAX232EIN can support short-distance remote control and monitoring links between a controller and a peripheral using the RS-232 protocol. The MAX232EIN's integrated charge pump removes the need for a separate negative supply, while the dual receiver arrangement can monitor two independent status signals. The 250 kbps limit is suitable for command traffic and periodic telemetry rather than high-speed streaming. Use twisted-pair wiring where practical, connect signal ground appropriately, and maintain compatible baud rate, parity, and framing settings on both endpoints.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MAX232EIN — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MAX232ECN | MAX232NE4 | MAX232EJE |
|---|---|---|---|---|
| Package | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Drivers / Receivers | 2 / 2 | 2 / 2 | 2 / 2 | 2 / 2 |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| Charge Pump | Integrated | Integrated | Integrated | Integrated |
| Mounting Type | Through Hole | Through Hole | Through Hole | Through Hole |
جیاکەرەوە سەرەکییەکان
- Complete 2/2 RS-232 interface in one package (بەراورد بەMAX232EJE)
- Single 5 V supply operation (بەراورد بەMAX232NE4)
- ESD protection for transient-sensitive interfaces (بەراورد بەMAX232ECN)
تێبینییەکانی دیزاین
Place the charge-pump capacitors and the VCC bypass capacitor close to the MAX232EIN pins with short, direct traces. Keep the RS-232 connector-side traces away from sensitive analog inputs, clock lines, and high-current switching paths. A compact ground return near the interface connector helps control common-mode noise and improves the behavior of the driver outputs during cable transients.
Do not treat a MAX232 family device as a direct substitute for an RS-485 interface. The MAX232EIN uses single-ended logic-to-bipolar-RS-232 conversion, while RS-485 uses a differential physical layer. Confirm the connector wiring, logic levels, baud rate, framing, and pin assignments before upgrading an existing board or substituting another ordering code.
Route transmit outputs directly toward the connector and receive inputs directly from it, avoiding long shared paths with unrelated digital signals. Keep the charge-pump loop compact because its switching currents can couple into nearby circuitry. If the RS-232 cable leaves the enclosure, verify the system-level ground reference and consider whether an isolated interface is needed for long or poorly grounded installations.
زانیاری پابەندبوون
IEC 61000-4-2 protection is identified in the device description. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the supplied product information.