Texas Instruments

MAX3221IDBR - 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3221IDBR ✓ چالاک
3 V to 5.5 V Vdss 1 µA Id 16-pin SSOP Package
MOQ: 1 |

MAX3221IDBR گشتی

The Texas Instruments MAX3221IDBR is a single-channel RS-232 line driver and receiver rated for data rates up to 250 kbps, with a 3 V to 5.5 V supply range and ±15 kV human-body-model ESD protection. The device is packaged in a 16-pin SSOP package. It provides one transmit channel, one receive channel, a receiver-enable control, and an automatic power-down input.

An RS-232 transceiver is an interface IC that translates low-voltage logic levels into the bipolar voltage levels used by RS-232 equipment. In the signal-chain hierarchy, the MAX3221IDBR belongs to the RS-232 interface family and converts between a host controller's logic-level UART signals and the ±RS-232 line interface. Its integrated dual charge-pump circuit generates the signal voltages required for transmission without a separate DC supply.

The 3 V to 5.5 V operating range supports both 3.3 V and 5 V systems. According to the manufacturer datasheet, the device operates up to 250 kbps, accepts 5 V logic input when powered from 3.3 V, and has a typical low standby current of 1 µA. The receiver-enable function can reduce quiescent consumption when the receive path is not required. The serial-port connection pins, including ground, have pin-to-pin ESD protection rated at ±15 kV using the human-body model.

Internally, the MAX3221IDBR combines one RS-232 driver, one RS-232 receiver, and a dual charge-pump circuit. Four external 0.1 µF capacitors support charge-pump operation. The receiver converts the differential RS-232 input to a CMOS-compatible logic output, while the driver converts CMOS-compatible logic input to the bipolar line voltage. The interface is designed for asynchronous communication controllers and conforms to TIA/EIA-232-F and ITU V.28 requirements.

Typical uses include industrial serial-port adapters, point-of-sale equipment, instrumentation, data-acquisition systems, embedded console connections, and legacy peripheral upgrades. The 250-kbps capability is suitable for RS-232 links that need more bandwidth than a conventional slow serial port while retaining compatibility with established communication standards. The compact SSOP-16 footprint also helps reduce board area in space-constrained controller modules.

When laying out the circuit, place the four 0.1 µF charge-pump capacitors close to their associated pins and route the RS-232 connector interface for minimum noise pickup. Confirm signal levels, grounding, cable length, and the target data rate before release. The receiver-enable and power-down functions should be driven deliberately so that low-power operation does not interfere with system startup or receive-data handling.

This page consolidates the manufacturer's electrical characteristics, package information, verified drop-in alternatives, application guidance, and practical layout considerations into one engineering-focused reference for selecting and implementing the MAX3221IDBR.

جێگرەوەکانی جێگۆڕکێ بۆ MAX3221IDBR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX3221IDBR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Product Type, ESD Protection, Package, Interface Standard, Supply Voltage Range.

Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver transceiver
ESD Protection: ±15 kV
بەراوردکردن لەگەڵ MAX3221IDBR →
Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver transceiver
ESD Protection: ±15 kV
بەراوردکردن لەگەڵ MAX3221IDBR →
Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver
ESD Protection: ±15kV IEC ESD
Package: 16-pin SSOP (DB)
بەراوردکردن لەگەڵ MAX3221IDBR →
Texas Instruments
Package: 16-SSOP, 5.30 mm width
Interface Standard: RS-232; TIA/EIA-232-F compliant
بەراوردکردن لەگەڵ MAX3221IDBR →
Maxim Integrated
Product Type: RS-232 line-driver and receiver transceiver
ESD Protection: ±15 kV
Supply Voltage Range: 3.0 V to 5.5 V
بەراوردکردن لەگەڵ MAX3221IDBR →
Texas Instruments
Product Type: RS-232 line driver and receiver transceiver
Package: 16-SSOP (0.209 inch, 5.30mm width)
Interface Standard: TIA/EIA-232-F
بەراوردکردن لەگەڵ MAX3221IDBR →
Texas Instruments
Product Type: RS-232 line driver and receiver transceiver
Package: 16-SSOP (0.209 inch, 5.30mm width)
Interface Standard: TIA/EIA-232-F
بەراوردکردن لەگەڵ MAX3221IDBR →
Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver
ESD Protection: ±15 kV
Interface Standard: RS-232
بەراوردکردن لەگەڵ MAX3221IDBR →
Texas Instruments
ESD Protection: ±15 kV HBM
بەراوردکردن لەگەڵ MAX3221IDBR →
Texas Instruments
ESD Protection: ±15 kV HBM on RS-232 bus pins
بەراوردکردن لەگەڵ MAX3221IDBR →

MAX3221EIDBR

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 SSOP-16
RS-232 line driver and receiver transceiver · 1 · 1 · 250kbps · 3V to 5.5V · TIA/EIA-232-F · IEC 61000-4-2 · ±15kV

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3221CDBR

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 SSOP-16
Single-channel RS-232 line driver/receiver transceiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · Full duplex · ±15 kV · Dual charge-pump circuit

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3221ECDBRG4

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 SSOP-16
Single-channel RS-232 line driver and receiver · 1 driver · 1 receiver · 3 V to 5.5 V · RS-232; TIA/EIA-232-F compliant · ±15 kV · ±8 kV · ±15 kV

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX3221CPWRG4

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Texas Instruments
📦 SSOP-16
Single-channel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbit/s · 1 · 1 · 1/1 full-duplex transceiver · ±15 kV · TIA/EIA-232-F

پەیوەندی بۆ نرخ

بینینی داتاشیت →

SP3221ECY

✅ جێگرەوەی ڕاستەوخۆ
📦 SSOP-16
Same SSOP-16 footprint, one driver and one receiver, and 3.3 V/5 V operation; ESD rating is identified as a variable difference

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX3221IDBR تایبەتمەندییەکان

Product Type Single-channel RS-232 line driver and receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Drivers 1
Number of Receivers 1
ESD Protection ±15 kV HBM on serial-port connection pins, including GND
Typical Standby Current 1 µA
External Charge-Pump Capacitors 4 × 0.1 µF
Receiver Enable Control 1 dedicated enable input
Logic Input Compatibility Accepts 5 V logic input with 3.3 V supply
RS-232 Compliance TIA/EIA-232-F and ITU V.28
Charge-Pump Architecture Dual charge-pump circuit
پاکێج 16-pin SSOP
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی MAX3221IDBR 16-pin ssop

ڕێکخستنی پین بۆ MAX3221IDBR (پاکێجی 16-pin ssop). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 16-pin ssop بۆ MAX3221IDBR

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX3221IDBR.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX3221IDBR گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial-Port Adapter, Instrumentation and Data Acquisition, Embedded Console and Service Port, Point-of-Sale and Peripheral Equipment, Network and Communication Management, RS-232 to Modern Logic Conversion.

🏭

Industrial Serial-Port Adapter

The MAX3221IDBR fits industrial controller boards that need one bidirectional RS-232 connection at up to 250 kbps. Its 3 V to 5.5 V supply range allows operation from either 3.3 V or 5 V logic rails, while the dedicated receiver-enable input can reduce power consumption when the receiver is not required. Place the device between the controller UART and an external DB9 or terminal connection, and provide the four specified 0.1 µF charge-pump capacitors close to the IC. The ±15 kV HBM ESD rating improves robustness at the connector-facing interface, although it does not replace correctly installed external surge protection or a low-impedance chassis-ground path.

🔧

Instrumentation and Data Acquisition

The MAX3221IDBR is appropriate for laboratory and test equipment that communicates with a PC, controller, or service terminal through RS-232. The 250-kbps maximum data rate supports responsive command and measurement transfers, while the 3.3 V capability allows the interface to be powered directly from a modern controller rail. Use the receiver output as the UART input and the UART transmit signal as the driver input, then route the RS-232 connector pins according to the manufacturer pin description. For long cables or noisy test environments, retain a common ground between equipment, use twisted-pair wiring where practical, and verify that the programmed UART baud rate remains within the device's 250-kbps limit.

💻

Embedded Console and Service Port

The MAX3221IDBR can provide a compact service-console interface on embedded equipment while the product is in a bench, test, or configuration mode. Its 1 µA typical standby current and dedicated power-down control are useful for systems that periodically disable the interface, and its one-driver/one-receiver arrangement matches a full-duplex RS-232 service port. Place the transceiver close to the connector and logic source, minimize exposed trace length, and route the charge-pump network away from sensitive analog sections. Confirm that the host UART uses compatible logic levels and that software disables the interface only after the receiver no longer needs to respond.

🖥️

Point-of-Sale and Peripheral Equipment

The MAX3221IDBR suits point-of-sale terminals, receipt printers, scanners, and legacy peripherals that expose an RS-232 service connection. The single transmit and receive channels cover the normal command-and-response traffic found in these systems, while 250-kbps operation provides ample bandwidth for short transactions and firmware diagnostics. The device accepts 5 V logic input when operated from 3.3 V, which can simplify connections to controller boards using mixed logic levels. Keep the charge-pump capacitors within a short loop on the PCB, provide solid ground continuity to the connector, and confirm the electrical standard and connector pin assignment of the attached peripheral before installation.

🌐

Network and Communication Management

The MAX3221IDBR can provide an out-of-band management path for routers, switches, and communication modules that retain an RS-232 console or configuration interface. Its compact SSOP-16 package preserves board area, and the 250-kbps rating is sufficient for terminal sessions, configuration output, and diagnostic commands. Because the interface is point-to-point, the ground conductor and signal polarity must match the connected equipment. Use the receiver-enable and power-down controls to avoid leaving the interface active during normal operation. Where an enclosure or long external cable is involved, combine the device's ±15 kV HBM protection with appropriate connector-side transient suppression.

⚡

RS-232 to Modern Logic Conversion

The MAX3221IDBR bridges older RS-232 equipment and a modern 3.3 V controller without a separate level-conversion stage. Its one driver converts controller UART logic into the bipolar RS-232 signal, while its receiver converts the incoming line voltage back to a logic-level output. The 3 V to 5.5 V operating range permits direct use with either 3.3 V or 5 V systems, and the stated ability to accept 5 V logic input with a 3.3 V supply simplifies transitions from mixed-voltage designs. Validate baud rate, signal polarity, cable length, and connector wiring in the final system, and route the charge-pump capacitors away from sensitive measurement circuits.

What are the key specifications of MAX3221IDBR that engineers should know?
The MAX3221IDBR is a 3 V to 5.5 V, single-channel RS-232 transceiver that operates up to 250 kbps and provides ±15 kV HBM ESD protection. According to the Texas Instruments MAX3221 datasheet, it contains one line driver, one receiver with a dedicated enable input, and a dual charge-pump circuit. It requires four external 0.1 µF capacitors and is offered in a 16-pin SSOP package for compact industrial, instrumentation, and embedded serial-interface designs.
What is the operating voltage of MAX3221IDBR?
The MAX3221IDBR operates from 3 V to 5.5 V. According to the Texas Instruments MAX3221 datasheet, this range supports both 3.3 V and 5 V supply environments. The device also accepts a 5 V logic-high input when its supply is 3.3 V, which simplifies interfacing with controllers that use 5 V UART signaling while the transceiver itself operates from a lower rail.
What is the maximum data rate of MAX3221IDBR?
The MAX3221IDBR supports RS-232 data rates up to 250 kbps. The Texas Instruments product page identifies the device as a single-channel 250-kbps line driver and receiver. This rating makes it appropriate for instrument-control links, embedded serial consoles, industrial controllers, and data-acquisition equipment that need more throughput than a low-speed RS-232 implementation.
Where can I download the MAX3221IDBR datasheet PDF?
The official MAX3221IDBR documentation is available through the Texas Instruments MAX3221 product page linked on this page. The manufacturer datasheet describes the 3 V to 5.5 V supply range, 250-kbps operation, ±15 kV HBM ESD protection, charge-pump capacitor requirements, logic levels, and package information. Use the manufacturer's ordering-information table to confirm the IDBR suffix, SSOP-16 package, and temperature-grade details.
Where can I find the MAX3221IDBR pinout?
The MAX3221IDBR pin configuration is shown in the pin-description and package-drawing sections of the Texas Instruments MAX3221 datasheet. The 16-pin SSOP includes the supply and ground connections, driver and receiver logic pins, enable and power-down controls, and charge-pump capacitor nodes. Use that pin-description table when assigning PCB nets because exposed capacitor nodes must follow the manufacturer layout guidance.
What is the difference between MAX3221IDBR and MAX3221EIDBR?
The MAX3221EIDBR is a pin-to-pin-compatible 16-pin SSOP variant identified in cross-reference material as having enhanced ±15 kV ESD protection matching the MAX3221IDBR. The MAX3221IDBR already specifies ±15 kV HBM protection and 250-kbps operation. Before approving either grade for a new design, verify its temperature range and ordering information against the Texas Instruments datasheet because those grade details distinguish the devices.
Can MAX3221EIDBR replace MAX3221IDBR as a drop-in replacement?
The MAX3221EIDBR can serve as a drop-in replacement candidate because cross-reference information identifies it as pin-to-pin compatible with the MAX3221IDBR, with the same 16-pin SSOP package and matching ±15 kV ESD rating. Review the complete ordering table before substitution, especially the operating-temperature grade and production-status requirements. PCB and schematic changes should not be necessary if the final electrical limits and pin functions match.
What is the best drop-in replacement for MAX3221IDBR?
The MAX3221EIDBR is the closest same-family drop-in candidate identified for the MAX3221IDBR because it uses the same 16-pin SSOP footprint and is described as pin-to-pin compatible with enhanced ±15 kV ESD protection. Other MAX3221 suffix variants may also share the electrical architecture, but package suffix, temperature grade, and lifecycle must be checked before release. Confirm the final replacement against the manufacturer pin table and datasheet.
Is MAX3221IDBR suitable for industrial serial communication?
The MAX3221IDBR is suitable for industrial serial links requiring a 3.3 V or 5 V supply, operation up to 250 kbps, and ±15 kV HBM ESD robustness. Its single driver and receiver are well suited to point-to-point controller-to-peripheral connections, instrumentation, and industrial adapters. For deployments with extended cables or severe electrostatic exposure, supplement the device-level ESD rating with appropriate connector-side protection.
When should I choose MAX3221IDBR over another RS-232 transceiver?
Choose the MAX3221IDBR when the design needs one RS-232 driver and one receiver, a 3 V to 5.5 V supply, operation up to 250 kbps, and ±15 kV HBM ESD protection in a 16-pin SSOP package. It is particularly useful where a dedicated receiver-enable input and 1 µA typical standby current support controlled-power applications. Select another device when the design requires more channels, a different package, a different data-rate target, or additional interface functions.
How much capacitance does MAX3221IDBR require?
The MAX3221IDBR requires four external 0.1 µF capacitors for its dual charge-pump circuit. According to the Texas Instruments MAX3221 datasheet, these capacitors support generation of the bipolar RS-232 transmit voltage. Place each capacitor close to the associated device pins and use the shortest practical routing, because long charge-pump traces can increase timing variation and susceptibility to external noise.
What is the ESD protection rating of MAX3221IDBR?
The MAX3221IDBR provides ±15 kV human-body-model ESD protection on the serial-port connection pins, including ground. According to the Texas Instruments MAX3221 product information, this protection is specified pin-to-pin for the external RS-232 connection. The internal rating does not eliminate the need for a protective earth path, suitable connector grounding, cable management, and system-level surge protection.
Where can I buy MAX3221IDBR online?
Use the Request a Quote form on this page to request MAX3221IDBR availability, current commercial terms, and a firm quotation. The request should identify the exact MPN, MAX3221IDBR, and the required quantity. The form also lets you request lead-time and packaging information without relying on a static price that may not reflect current inventory or order volume.
What is the lead time for MAX3221IDBR?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with order quantity, date of the manufacturer build, and packaging configuration, so a representative production schedule should be confirmed before committing the BOM. For supply-risk planning, include MAX3221CDBR or MAX3221EIDBR as reviewed alternatives only after confirming package, temperature grade, and lifecycle requirements.
Is MAX3221IDBR in stock?
Check current stock status by submitting MAX3221IDBR through the Request a Quote form on this page. The form requests a current availability response for the exact MPN and your required quantity. Because semiconductor inventory can change rapidly, use the returned confirmation rather than assuming that a catalog listing or a generic product page represents guaranteed stock.

داتای سەرچاوەی ئەندازیاری بۆ MAX3221IDBR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the MAX3221IDBR for a compact, single-channel RS-232 interface operating from 3.3 V or 5 V at up to 250 kbps, particularly when a dedicated receiver-enable input, 1 µA typical standby current, and documented ±15 kV HBM protection are important. MAX3221EIDBR is the closest same-family drop-in candidate when its temperature grade satisfies the product requirements. MAX3221CDBR, MAX3221ECDBR, and MAX3221CPWRG4 can be considered for footprint-compatible substitutions only after confirming their suffix-specific temperature, qualification, and lifecycle details. SP3221ECY provides a cross-brand SSOP-16 option with automatic power-down, but its data rate, ESD rating, logic levels, and shutdown behavior should be checked against the original design. For any substitution, verify every pin, capacitor value, supply range, UART baud rate, and connector arrangement before release.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX3221EIDBR MAX3221CDBR MAX3221ECDBR MAX3221CPWRG4 SP3221ECY
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments MaxLinear
Package SSOP-16 SSOP-16 - same SSOP-16 - same SSOP-16 - same SSOP-16 - same SSOP-16 - same
Interface RS-232 line driver and receiver RS-232 line driver and receiver RS-232 line driver and receiver RS-232 line driver and receiver RS-232 line driver and receiver 1/1 RS-232 transceiver
Driver and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3.3 V / 5 V operation
Power-Down Feature Dedicated power-down input Dedicated power-down input Dedicated power-down input Dedicated power-down input Dedicated power-down input Automatic power-down feature

جیاکەرەوە سەرەکییەکان

  • Matches the 250-kbps single-channel RS-232 architecture (بەراورد بەMAX3221EIDBR)
  • Provides a specified ±15 kV HBM ESD rating on serial-port pins (بەراورد بەMAX3221CDBR)
  • Supports both 3.3 V and 5 V supply environments (بەراورد بەSP3221ECY)

تێبینییەکانی دیزاین

Place all four 0.1 µF charge-pump capacitors immediately adjacent to the corresponding MAX3221IDBR pins, and keep their ground-side return paths short and compact. Avoid placing sensitive analog or high-speed digital traces beneath the charge-pump section. The device generates internal bipolar voltages for RS-232 transmission, so minimizing the capacitor loop helps control switching transients and prevents externally induced noise from coupling into nearby circuitry.

Route the RS-232 connector, driver output, and receiver input as a physically consistent point-to-point interface. Keep the logic-side traces away from the connector-facing nets, provide a continuous ground path to the connector, and maintain the recommended spacing between transmit and receive paths. Although the MAX3221IDBR includes ±15 kV HBM protection, proper layout, grounding, cable design, and connector-side protection remain necessary for reliable operation in industrial environments.

Do not omit any of the four specified 0.1 µF charge-pump capacitors or substitute capacitors outside the manufacturer's required characteristics. Also verify the receiver-enable and power-down logic states during startup. Driving these controls incorrectly can leave the receiver active, inhibit intended low-power behavior, or conflict with the attached RS-232 equipment. Confirm the final UART baud rate remains at or below 250 kbps and that signal polarity and connector wiring match the remote device.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The MAX3221 is a commercial interface IC and is not identified as an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

داتا پشتڕاستکراوەتەوە لە: 2026-11-13 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

max3221idbr datasheet MAX3221IDBR MAX3221IDBR datasheet pdf MAX3221IDBR pinout MAX3221IDBR SSOP-16 footprint MAX3221IDBR equivalent MAX3221IDBR replacement MAX3221IDBR cross reference MAX3221IDBR vs MAX3221EIDBR MAX3221IDBR application circuit MAX3221IDBR 250kbps RS-232 MAX3221IDBR 3.3V 5V Texas Instruments MAX3221IDBR MAX3221IDBR price MAX3221IDBR stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments MAX3221IDBR MAX3221EIDBR MAX3221CDBR MAX3221ECDBR SP3221ECY RS-232 transceiver line driver line receiver interface IC semiconductor charge-pump circuit TIA/EIA-232-F ITU V.28 SSOP-16 SSOP package family surface-mount package UART ESD protection 3.3 V logic 5 V logic 250 kbps human-body model automatic power-down
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ