Texas Instruments

PCA9554DB - 8-Bit I2C I/O Expander, 5.5V | TI

MPN: PCA9554DB ✓ چالاک
2.3 V to 5.5 V Vdss 16-pin SSOP Package 400 kHz Speed
MOQ: 1 |

PCA9554DB گشتی

The Texas Instruments PCA9554DB is an 8-bit I2C/SMBus I/O expander with interrupt, weak pull-ups, and configuration registers, operating from 2.3 V to 5.5 V in a 16-pin SSOP package. According to the verified product listing, it supports I2C/SMBus communication at up to 400 kHz and provides eight general-purpose remote I/O ports.

An I/O expander is an interface IC that increases the number of input and output lines available to a microcontroller or other host processor. The PCA9554 belongs to the I2C interface-controller hierarchy: it connects through the two-line bidirectional bus using SCL and SDA, while its eight parallel pins can be configured individually as inputs or outputs. This makes it useful when a system needs remote control, monitoring, or signal-interface expansion without adding a larger microcontroller package.

The verified listing identifies weak pull-ups, an interrupt output, and configuration registers as defining features. Configuration registers allow the host to define each port direction and control output states, while the interrupt output provides a change notification mechanism for input events. The 2.3 V to 5.5 V operating range supports both low-voltage and conventional 5 V system rails, subject to the host and bus requirements.

The PCA9554DB is identified as a 16-SSOP I/O expander by DigiKey, with an operating bus frequency of 400 kHz. This combination of eight configurable I/O lines, interrupt support, and a compact surface-mount package makes the device suitable for embedded control, remote sensing, keypad or display interfaces, and small automation systems.

Designers should confirm the device address, pull-up implementation, electrical limits, and interrupt polarity against the manufacturer datasheet before finalizing a board. The verified data does not provide pin-level naming, output-current limits, or detailed timing values, so those parameters require verification rather than assumption.

جێگرەوەکانی جێگۆڕکێ بۆ PCA9554DB — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PCA9554DB (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Configuration Registers, Interrupt Output, Device Type, Interface.

Texas Instruments
Package: 16-pin SSOP (DB)
Configuration Registers: Yes
Interrupt Output: Yes
بەراوردکردن لەگەڵ PCA9554DB →
Texas Instruments
Configuration Registers: Available
Device Type: General-purpose I/O expander
بەراوردکردن لەگەڵ PCA9554DB →
NXP Semiconductors
Package: 16-HVQFN (3x3 mm) with exposed pad
Interrupt Output: /INT, open-drain
بەراوردکردن لەگەڵ PCA9554DB →
Texas Instruments
Package: 16-TSSOP
Configuration Registers: Yes
Interrupt Output: Yes
بەراوردکردن لەگەڵ PCA9554DB →

PCA9554DB

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 16-pin SSOP
8-bit I2C/SMBus I/O expander with interrupt · 8 · 2.3 V to 5.5 V · I2C/SMBus · 400 kHz · Present · Present · Present

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PCA9554ABS3,118

✅ جێگرەوەی ڕاستەوخۆ
NXP Semiconductors
📦 16-pin SSOP
I2C, SMBus · 8 · 400 kHz · 2.3 V to 5.5 V · 5.5 V · 3 hardware address pins (up to 8 devices) · /INT, open-drain · 0x38 (3-bit addr 000 = 0x38)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TCA9554PWR

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 TSSOP-16
8-bit I/O expander · 8 ports · 1.65 V to 5.5 V · I2C / SMBus · 400 kHz · Yes · Yes · Yes

پەیوەندی بۆ نرخ

بینینی داتاشیت →

TCA9554ADBR

✅ جێگرەوەی ڕاستەوخۆ
📦 SSOP-16
Related 8-bit I2C expander in a 16-pin SSOP-class package; address, pinout, and detailed electrical differences require verification

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PCA9534DB

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 16-pin SSOP
8 ports · I2C and SMBus · 2.3 V to 5.5 V · 400 kHz · 3 pins · 8 devices · 8 configurable I/O bits · 1 interrupt output

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PCA9554DB تایبەتمەندییەکان

کارکردن 8-bit I2C/SMBus I/O expander with interrupt
Number of I/O Lines 8
Operating Voltage Range 2.3 V to 5.5 V
ڕووکار I2C/SMBus
Maximum Bus Frequency 400 kHz
Configuration Registers Present
Interrupt Output Present
Weak Pull-Ups Present
پاکێج 16-pin SSOP
جۆری دامەزراندن Surface mount
Device Class General-purpose remote I/O expander
ڕێکخستنی دەرچوون Individually configurable input/output ports
Bus Signals SCL and SDA

ڕێنمایی ڕێکخستنی پینی PCA9554DB 16-pin ssop

ڕێکخستنی پین بۆ PCA9554DB (پاکێجی 16-pin ssop). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 16-pin ssop بۆ PCA9554DB

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PCA9554DB.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PCA9554DB گونجاوە بۆ 7 بەکارھێنانs: Microcontroller GPIO Expansion, Remote Sensor and Actuator Interface, Embedded Control Panel, Industrial Automation Module, Remote Monitoring and Control, LED and Indicator Control, Consumer and Communication Equipment.

🔧

Microcontroller GPIO Expansion

The PCA9554DB is useful when a microcontroller has too few direct pins for control and monitoring functions. Its eight configurable I/O ports operate through the I2C/SMBus interface at up to 400 kHz, allowing the host to read remote inputs and drive remote outputs while conserving package pins. The design should define port directions in the configuration registers and account for the device's interrupt output when an input change must wake the host.

🏭

Remote Sensor and Actuator Interface

PCA9554DB can place eight digital I/O lines behind an I2C connection between a controller and a remote circuit card. This arrangement is useful for reading discrete sensor outputs or driving relays, indicators, and other digital actuators when direct board-to-board GPIO routing is inconvenient. The 2.3 V to 5.5 V operating range supports mixed-voltage systems, but cable length, bus capacitance, pull-up values, grounding, and output drive must be validated for the selected remote load.

🧩

Embedded Control Panel

The eight ports can serve as an I2C-connected front panel interface for buttons, indicators, lamps, selectors, and status signals. A host microcontroller can scan inputs and update outputs over the same two-wire bus, reducing wiring compared with direct GPIO. The verified interrupt feature can reduce unnecessary polling when an input state changes, while the 400 kHz maximum bus rate supports compact embedded-control architectures when the total bus loading and firmware timing remain acceptable.

🏭

Industrial Automation Module

PCA9554DB is suitable for small automation modules that need a compact, addressable set of digital outputs and inputs. The device can connect discrete control signals to a microcontroller while the interrupt output provides an event path for changing input conditions. In an industrial enclosure, engineers should verify voltage tolerances, isolation requirements, surge protection, grounding, connector current limits, and the operating temperature range because those details are not provided in the supplied verified snippets.

📡

Remote Monitoring and Control

The PCA9554DB can monitor remote digital conditions and return control outputs through the host's I2C bus. This pattern is useful in equipment where a central controller needs distributed status points without routing every signal back as a direct GPIO. The interrupt output can signal activity, but system timing depends on the host firmware, bus clock, pull-up network, and whether the remote signals are slower than the 400 kHz bus capability. Input thresholds and output current must be confirmed from the full datasheet.

💡

LED and Indicator Control

Eight output ports from PCA9554DB can control groups of LEDs, status lamps, or indicator signals when the host lacks sufficient direct output pins. The I2C connection reduces the number of dedicated microcontroller pins, while configuration registers define which ports are outputs. The designer must check the device's output drive limits and supply requirements before directly loading LEDs or other devices; the supplied data confirms eight I/O lines and configurable ports but does not specify per-pin output current.

📱

Consumer and Communication Equipment

PCA9554DB can add configurable digital lines in compact consumer, communications, or accessory hardware where the main controller is connected to I2C. Its 2.3 V to 5.5 V range accommodates common low-voltage and 5 V rails, and the 16-pin SSOP package supports compact board layouts. Product-specific compliance, temperature, EMC, and output-loading requirements are not supplied in the verified data and must be evaluated separately rather than inferred from the interface function.

کورتەی بەرهەمە پێشنیارکراوەکان

ATMEGA328-AU Microchip Technology بەکارهێنراوە لە: Microcontroller GPIO Expansion STM32F030R8T6TR STMicroelectronics بەکارهێنراوە لە: Microcontroller GPIO Expansion PCA9557D Texas Instruments بەکارهێنراوە لە: Microcontroller GPIO Expansion, Embedded Control Panel, Consumer and Communication Equipment SN74LS07D Texas Instruments بەکارهێنراوە لە: Remote Sensor and Actuator Interface, LED and Indicator Control SN75176BD Texas Instruments بەکارهێنراوە لە: Remote Sensor and Actuator Interface MAX3245ECAI+ Analog Devices بەکارهێنراوە لە: Remote Sensor and Actuator Interface STM32F103C8T6 STMicroelectronics بەکارهێنراوە لە: Embedded Control Panel, Embedded Control Panel ATMEGA8A-AUR Microchip Technology بەکارهێنراوە لە: Embedded Control Panel MAX31856MUD+ Analog Devices بەکارهێنراوە لە: Industrial Automation Module ADM485ARZ Analog Devices بەکارهێنراوە لە: Industrial Automation Module ATMEGA2560V-8CU Microchip Technology بەکارهێنراوە لە: Industrial Automation Module W5100 WIZnet بەکارهێنراوە لە: Remote Monitoring and Control LAN9252I/PT Microchip Technology بەکارهێنراوە لە: Remote Monitoring and Control STM32F103ZET6 STMicroelectronics بەکارهێنراوە لە: Remote Monitoring and Control ATMEGA328P-AU Microchip Technology بەکارهێنراوە لە: LED and Indicator Control STM32F030C8T6TR STMicroelectronics بەکارهێنراوە لە: LED and Indicator Control CP2102N-A02-GQFN20R Silicon Labs بەکارهێنراوە لە: Consumer and Communication Equipment TJA1021T/20/C NXP Semiconductors بەکارهێنراوە لە: Consumer and Communication Equipment
What is the PCA9554DB?
The PCA9554DB is an 8-bit I2C/SMBus I/O expander with interrupt, weak pull-ups, and configuration registers. According to the verified Texas Instruments product listing, it operates from 2.3 V to 5.5 V and is packaged in a 16-pin SSOP. It adds eight configurable parallel I/O lines to a host controller, helping reduce the number of GPIO pins required in embedded systems.
What is the operating voltage of PCA9554DB?
The PCA9554DB operates from 2.3 V to 5.5 V. This range is stated in the verified Texas Instruments product-page snippet and the verified distributor data. The host system must also satisfy the device's I2C input levels, pull-up requirements, and supply sequencing conditions, which should be confirmed in the manufacturer datasheet.
How many I/O lines does PCA9554DB provide?
The PCA9554DB provides eight general-purpose I/O lines. The verified DigiKey listing describes it as an 8-channel I/O expander, while the Texas Instruments listing identifies an 8-bit I2C/SMBus I/O expander. The ports can be configured through the device's configuration registers and connect to a host through SCL and SDA.
What is the PCA9554DB I2C bus frequency?
The PCA9554DB supports I2C/SMBus operation up to 400 kHz. This maximum bus frequency is explicitly shown in the verified DigiKey product listing. Actual system timing must remain within the limits of the host controller, bus capacitance, pull-up resistance, and every peripheral connected to the bus.
Does PCA9554DB have an interrupt output?
Yes. The PCA9554DB includes an interrupt output, as stated in the verified Texas Instruments product-page snippet and the verified distributor descriptions. The interrupt can notify the host of relevant input activity, but its exact trigger conditions, polarity, and mask behavior must be verified in the manufacturer datasheet before firmware is finalized.
Where can I download the PCA9554DB datasheet?
The official product page is available at https://www.ti.com/product/PCA9554, which is the appropriate starting point for the Texas Instruments datasheet and support information. The verified search results also include an NXP datasheet page for the historically related PCA9554DB. Because PCA9554DB is listed by both TI and NXP in the supplied data, engineers should confirm the exact manufacturer or sourcing provenance before release.
Where can I buy PCA9554DB and what is its price?
PCA9554DB can be purchased from Texas Instruments through DigiKey, Mouser, and other listed distributors. LCSC lists a starting price of $1.3604 and identifies the part as in stock in the verified data. Pricing and availability change with quantity and date, so the listed price should be treated as a reference as of 2026-10-22 and confirmed at the distributor checkout.
What is the lead time for PCA9554DB?
The verified data does not state a guaranteed lead time for PCA9554DB. DigiKey describes the part as available to buy and ship today, while LCSC identifies it as in stock, but those statements do not establish a universal procurement lead time. For a production schedule, request a current quote and manufacturer allocation from the selected authorized distributor.
Is PCA9554DB in stock?
The verified LCSC result identifies PCA9554DB as in stock, and the DigiKey listing says it can be bought and shipped today. Stock status is distributor- and quantity-specific, so it can change after the retrieval date of 2026-10-22. Treat the statement as a same-day data observation rather than a guaranteed future availability commitment.
What can replace PCA9554DB?
A true drop-in replacement must match the 16-pin SSOP footprint, pin functions, I2C address behavior, voltage range, interrupt arrangement, and port electrical characteristics. The supplied cross-reference results identify PCA9554A-family and TCA9554-family products for comparison, but they do not provide enough verified pin-by-pin data to declare any candidate universally drop-in. Validate the replacement against both manufacturers' current datasheets.
What is the best NXP equivalent for PCA9554DB?
The supplied data identifies an NXP PCA9554DB product page and notes that PCA9554 and PCA9554A use a different address from each other. That difference matters when replacing an existing device because the software address and bus configuration may change. The supplied evidence does not confirm a specific alternate NXP MPN as a drop-in replacement, so verify the exact ordering code, pinout, and lifecycle status before substitution.
PCA9554DB vs TCA9554PWR — which is better for an I2C GPIO expander?
PCA9554DB and TCA9554PWR are both I/O-expander candidates, but the choice depends on verified pin compatibility, address, voltage, interrupt, and electrical details. The supplied comparison results mention TCA9554PWR, yet they do not establish that it is pin-to-pin compatible with every PCA9554DB design. Use PCA9554DB when the existing PCB and firmware match its verified behavior; use another candidate only after footprint and register-level review.
When should I choose PCA9554DB over PCA9554A?
Choose PCA9554DB when the circuit and firmware specifically require its verified address and bus behavior. The supplied NXP listing states that PCA9554 and PCA9554A have different addresses, so they are not automatically interchangeable in firmware even if their general-purpose I/O functions are related. The correct selection depends on the host's configured slave address and the complete manufacturer datasheet comparison.
Is PCA9554DB suitable for a microcontroller with limited GPIO pins?
Yes, PCA9554DB is suitable for a microcontroller that needs additional remote I/O lines over I2C. The device provides eight configurable general-purpose ports, a 400 kHz maximum bus rate, and an interrupt output, allowing input monitoring or output control without consuming eight direct GPIO pins. The host firmware must configure the port directions and handle the I2C transactions and interrupt behavior.
What design details should I verify before using PCA9554DB?
Verify the complete pinout, supply decoupling, I2C pull-ups, device address, interrupt polarity, output drive limits, input thresholds, and power-up states in the manufacturer datasheet. The verified data confirms the 2.3 V to 5.5 V range, eight I/O lines, 400 kHz bus support, interrupt, weak pull-ups, and configuration registers, but it does not provide detailed pin-level electrical limits.

داتای سەرچاوەی ئەندازیاری بۆ PCA9554DB — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PCA9554DB when the design specifically matches its 8-bit I2C/SMBus expander function, 2.3 V to 5.5 V operating range, 400 kHz bus capability, configuration registers, interrupt output, weak pull-ups, and 16-pin SSOP footprint. PCA9554A is a related option, but the supplied NXP information says its address differs, so it is appropriate only after firmware and bus configuration are updated. TCA9554PWR, TCA9554ADBR, and PCA9534DB may be useful related devices, but the provided data does not establish complete pin-to-pin equivalence or detailed electrical parity. Treat the listed alternatives as candidates for engineering validation rather than unconditional substitutions. For a new design, use the current manufacturer datasheet and confirm lifecycle, package, address, interrupt behavior, pinout, supply limits, and temperature grade before release.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PCA9554A TCA9554PWR TCA9554ADBR PCA9534DB
Brand Texas Instruments NXP Semiconductors Texas Instruments Texas Instruments NXP Semiconductors
Package 16-pin SSOP 16-pin SSOP TSSOP-16 SSOP-16 16-pin SSOP
Interface I2C/SMBus I2C/SMBus I2C/SMBus I2C/SMBus I2C/SMBus

جیاکەرەوە سەرەکییەکان

  • Eight configurable remote I/O lines in a compact 16-pin SSOP package (بەراورد بەPCA9554A)
  • Explicit interrupt, configuration-register, and weak-pull-up features (بەراورد بەPCA9534DB)
  • I2C/SMBus operation up to 400 kHz (بەراورد بەTCA9554PWR)

تێبینییەکانی دیزاین

Place the PCA9554DB close to the SCL and SDA routing and keep the I2C traces short and continuous. The verified device supports up to 400 kHz, but actual bus operation also depends on capacitance, pull-up resistance, trace length, and every peripheral on the bus. Confirm the complete pin names and exposed connections from the manufacturer datasheet before finalizing the footprint.

Design the 2.3 V to 5.5 V supply rail with appropriate local decoupling and verify the host and peripheral logic levels. Do not infer output-current capability from the eight-port description; the verified snippets do not provide per-pin drive limits, so loads such as LEDs or relay drivers must be checked against the full manufacturer datasheet.

Do not treat PCA9554 and PCA9554A as address-identical. The supplied NXP listing states that the devices have different addresses, so replacing one with the other can leave the host controller unable to communicate. Firmware, pull-up configuration, interrupt polarity, and the selected manufacturer must all be reviewed together.

Reserve test points for VCC, ground, SCL, SDA, the interrupt line, and all eight I/O signals. Keeping these points accessible helps validate bus rise time, port direction, and interrupt behavior during bring-up. If a remote cable or long trace is used, evaluate signal integrity and protection separately from the nominal 400 kHz specification.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The supplied verified snippets do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim should be inferred from the interface description.

داتا پشتڕاستکراوەتەوە لە: 2026-10-22 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PCA9554DB PCA9554DB datasheet Texas Instruments PCA9554DB PCA9554DB 8-bit I2C I/O expander PCA9554DB 2.3V 5.5V PCA9554DB 16-SSOP PCA9554DB GPIO expansion PCA9554DB vs TCA9554PWR PCA9554DB vs PCA9554A PCA9554DB drop-in replacement PCA9554DB buy online PCA9554DB price PCA9554DB lead time PCA9554DB pinout What can replace PCA9554DB

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments PCA9554DB PCA9554 PCA9554A PCA9534DB TCA9554PWR TCA9554ADBR 8-bit I/O expander I/O expander I2C SMBus SCL SDA interrupt output configuration register weak pull-up remote GPIO 2.3 V 5.5 V 400 kHz 16-pin SSOP surface-mount package microcontroller
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ