Analog Devices

MAX338CSE+T - 8:1 CMOS Multiplexer | Analog Devices

MPN: MAX338CSE+T ✓ چالاک
+4.5 V to +30 V Vdss 400 ohm Rds(on) 16-pin narrow SOIC Package
MOQ: 1 |

MAX338CSE+T گشتی

Analog Devices MAX338CSE+T is an 8:1 low-leakage CMOS analog multiplexer with a maximum on-resistance of 400 ohm, operating from a single +4.5 V to +30 V supply or dual ±4.5 V to ±20 V supplies. The device is packaged in a 16-pin narrow SOIC and uses three binary address inputs to connect one of eight inputs to the common output. MAX338 is also described as a dual 4-channel configuration for compatible applications.

An analog multiplexer is a semiconductor switch that routes multiple analog signals through one common signal path. It belongs to the analog switch and multiplexer hierarchy within interface ICs, enabling data acquisition, signal routing, and test systems to use fewer external components. The MAX338CSE+T is particularly useful where low leakage, TTL-compatible addressing, and flexible single- or dual-supply operation are important.

The principal operating characteristics include a 400 ohm maximum on-resistance, low-leakage CMOS construction, and address controls that accept TTL input levels from +0.8 V to +2.4 V over the specified temperature and supply ranges. The analog multiplexer uses Maxim's 44 V silicon-gate process. These features make it suitable for precision signal selection where the selected channel must minimize interference with high-impedance sources.

The single-supply configuration supports +4.5 V to +30 V, while dual-supply operation supports ±4.5 V to ±20 V. This versatility allows the same circuit architecture to handle positive-only systems and bipolar analog nodes. The 16-pin narrow SOIC package is surface mountable and provides a conventional footprint for compact instrumentation and industrial control equipment.

Typical uses include data-acquisition systems, automated test equipment, battery and power-management monitoring, industrial measurement interfaces, and multiplexed sensor inputs. In these applications, the three address lines select one of eight channels while the common path carries the selected signal to a downstream amplifier, converter, or processing circuit.

Designers should account for the 400 ohm on-resistance when driving the selected input. The source impedance, amplifier input bias current, injected charge, and leakage of the connected channel influence overall accuracy. Use the manufacturer's pin-description and typical-application information to assign address inputs, supply rails, enable control, and the common terminals.

This product summary combines the manufacturer specifications, package information, functional cross-references, and practical routing guidance into a design-oriented reference. It highlights the electrical limits, supply flexibility, and substitution constraints needed to evaluate MAX338CSE+T before integrating it into a PCB.

جێگرەوەکانی جێگۆڕکێ بۆ MAX338CSE+T — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MAX338CSE+T (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Multiplexer Configuration, Number of Channels, Process Technology.

Maxim Integrated
Package: 16-pin Narrow SOIC (NSOIC)
Number of Channels: 8 single-ended or 2x4 differential
بەراوردکردن لەگەڵ MAX338CSE+T →
Analog Devices
Package: 16-SOIC
Process Technology: 44 V silicon-gate CMOS
بەراوردکردن لەگەڵ MAX338CSE+T →
Analog Devices
Package: 16-pin NSOIC
Multiplexer Configuration: Dual 4:1
بەراوردکردن لەگەڵ MAX338CSE+T →

MAX338ESE+T

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 16-SOIC
8:1 · 1 circuit · 400 ohm · +4.5 V to +30 V · ±4.5 V to ±20 V · 3-bit binary · +0.8 V to +2.4 V · 44 V silicon-gate CMOS

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX328CSE+

✅ جێگرەوەی ڕاستەوخۆ
📦 16-SOIC
Supply-range difference is 0 V; leakage is lower and charge injection is lower, but on-resistance is higher than the MAX338's 400 ohm maximum.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX329CSE+

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 16-SOIC
Supply-range difference is 0 V and the package count is unchanged at 16 pins; the dual 4-channel topology differs from the MAX338's single 8:1 topology.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX318CSE+

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 16-SOIC
Supply-range difference is 0 V and the 8:1 channel count is retained; the alternative family emphasizes lower on-resistance at the expense of higher leakage.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

MAX339CSE+

✅ جێگرەوەی ڕاستەوخۆ
Analog Devices
📦 16-SOIC
Dual 4:1 · 8 · CMOS analog multiplexer · 650 ohms maximum · 4.5 V to 30 V · ±4.5 V to ±20 V · TTL compatible · 0.8 V to 2.4 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

MAX338CSE+T تایبەتمەندییەکان

Multiplexer Configuration 8:1
Number of Circuits 1 circuit
Number of Channels 8 channels
Maximum On-Resistance 400 ohm
Single-Supply Operating Range +4.5 V to +30 V
Dual-Supply Operating Range ±4.5 V to ±20 V
TTL Input Logic High +0.8 V to +2.4 V
Process Technology 44 V silicon-gate CMOS process
Switch Type CMOS analog multiplexer
Signal Direction Bidirectional conduction
پاکێج 16-pin narrow SOIC
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی MAX338CSE+T 16-pin narrow soic

ڕێکخستنی پین بۆ MAX338CSE+T (پاکێجی 16-pin narrow soic). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 16-pin narrow soic بۆ MAX338CSE+T

هیچ داتای وردی پینئاوت بەردەست نییە بۆ MAX338CSE+T.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

MAX338CSE+T گونجاوە بۆ 6 بەکارھێنانs: Automated Test Equipment, Multiplexed Sensor Acquisition, Battery Monitoring Systems, Industrial Process Measurement, Data Acquisition Systems, Instrument Signal Routing.

🏭

Automated Test Equipment

The MAX338CSE+T suits automated test systems that must route one of eight measured nodes to a shared instrument front end. Its 8:1 topology reduces the number of external analog switches, while the 400 ohm maximum on-resistance provides a defined insertion-loss limit for the selected path. The three address lines simplify channel sequencing in test-controller firmware. Because the mux is bidirectional, the same routing arrangement can support input measurement and output stimulus when the external circuit provides suitable drive and protection.

🧩

Multiplexed Sensor Acquisition

The MAX338CSE+T can connect eight low-frequency sensor channels to one amplifier or converter input. Its low-leakage CMOS construction helps limit input-related error when the source impedance is high, while the 400 ohm maximum on-resistance defines the additional loading seen by the selected sensor. The TTL-compatible address inputs from +0.8 V to +2.4 V simplify interfacing with digital controllers. Select the supply mode according to whether sensors produce zero-to-positive or bipolar signals.

⚡

Battery Monitoring Systems

The MAX338CSE+T is appropriate for routing multiple battery-cell or rail voltages into a common measurement channel. Single-supply operation from +4.5 V to +30 V accommodates higher-voltage monitoring systems, and the eight-input configuration allows multiple cells to be inspected sequentially. The low-leakage design helps avoid loading high-impedance dividers, while the 400 ohm on-resistance must be included when calculating divider and converter loading errors. The device can also operate from dual supplies for bipolar battery systems.

🏭

Industrial Process Measurement

The MAX338CSE+T supports industrial process-monitoring boards that must select among multiple analog pressure, temperature, or current signals. Its 8:1 organization limits the analog routing area, and the 16-pin narrow SOIC package supports compact surface-mount layouts. The specified +4.5 V to +30 V single-supply range accommodates common 24 V industrial signal frameworks after suitable conditioning. Engineers should account for the 400 ohm path resistance, leakage, and transient protection when designing long field-wired inputs.

📊

Data Acquisition Systems

The MAX338CSE+T is useful in multichannel data-acquisition systems requiring a compact analog switching stage. Eight selectable inputs can feed one common analog-to-digital or signal-conditioning path, reducing converter count and board area. Its bidirectional CMOS switches support measurement and controlled stimulus configurations. The 400 ohm maximum on-resistance creates a calculable error term when combined with high source impedance, so calibrate the selected channel or maintain sufficiently low source impedance to preserve accuracy.

🔧

Instrument Signal Routing

The MAX338CSE+T can route several instrument inputs to a shared amplifier, detector, or measurement core while conserving front-panel space. Its TTL-compatible address controls allow direct use with common digital interface voltages, and the manufacturer describes the device as conducting current equally well in both directions. The 400 ohm maximum on-resistance is acceptable for many medium-impedance instrumentation signals, but high-impedance precision paths require an error-budget calculation. Always verify common-terminal assignments for the selected board configuration.

کورتەی بەرهەمە پێشنیارکراوەکان

What is the MAX338CSE+T?
The MAX338CSE+T is an 8:1 low-leakage CMOS analog multiplexer in a 16-pin narrow SOIC package. According to the Analog Devices manufacturer datasheet, it connects one of eight inputs to a common output using binary address control and has a maximum on-resistance of 400 ohm. It supports single +4.5 V to +30 V operation or dual ±4.5 V to ±20 V operation.
What is the operating voltage range of MAX338CSE+T?
The MAX338CSE+T operates from +4.5 V to +30 V with a single supply or from ±4.5 V to ±20 V with dual supplies. The Analog Devices manufacturer datasheet also specifies TTL-compatible address and enable inputs spanning +0.8 V to +2.4 V over the full specified temperature and supply ranges.
Where can I download the MAX338CSE+T datasheet PDF?
The MAX338CSE+T datasheet PDF is available from Analog Devices at the manufacturer's MAX338/MAX339 data-sheet URL. It describes the 8-channel and dual 4-channel low-leakage CMOS multiplexers, the +4.5 V to +30 V single-supply range, the ±4.5 V to ±20 V dual-supply range, and the MAX338CSE 16-pin narrow SOIC configuration.
Where can I find the MAX338CSE+T pinout?
Use the pin-description diagram and terminal table in the Analog Devices MAX338/MAX339 manufacturer datasheet to find the MAX338CSE+T pinout. The device uses a 16-pin narrow SOIC package with an 8:1 multiplexing configuration, three address-control inputs, multiple analog channels, supply terminals, and common outputs.
What are the key specifications of MAX338CSE+T that engineers should know?
The key MAX338CSE+T specifications are an 8:1 configuration, 400 ohm maximum on-resistance, 16-pin narrow SOIC packaging, and low-leakage CMOS construction. The Analog Devices manufacturer datasheet specifies +4.5 V to +30 V single-supply operation, ±4.5 V to ±20 V dual-supply operation, and TTL control levels from +0.8 V to +2.4 V.
How does the MAX338CSE+T select one of eight inputs?
The MAX338CSE+T selects one of eight inputs through a 3-bit binary address interface. The selected analog channel connects to the common path, allowing one downstream circuit to process any of the eight inputs. According to the Analog Devices manufacturer datasheet, the address inputs are TTL-compatible from +0.8 V to +2.4 V.
Can MAX338CSE+T operate from a single 5 V supply?
Yes, the MAX338CSE+T can operate from a single 5 V supply because its specified single-supply range is +4.5 V to +30 V. The Analog Devices manufacturer datasheet also supports bipolar operation from ±4.5 V to ±20 V. The appropriate supply arrangement depends on the voltage range that the multiplexed analog signals must accommodate.
What can replace the MAX338CSE+T?
The MAX338ESE+T is the closest same-family candidate because it retains the MAX338 function and 16-pin narrow SOIC footprint while extending the temperature grade. MAX328CSE+ and MAX329CSE+ are related low-leakage devices, but their leakage and on-resistance trade-offs differ. Verify address, enable, common-pin assignments, voltage range, and signal levels before substitution.
Is MAX338ESE+T the same as MAX338CSE+T?
The MAX338ESE+T is a temperature-grade variation of the MAX338 family and uses the same 16-pin narrow SOIC format. The Xecor comparison identifies both as active 8:1 multiplexers, while the E suffix distinguishes their temperature specifications. Confirm the exact operating-temperature rating and production requirements in the manufacturer datasheet before exchanging them.
When should I choose MAX338CSE+T over MAX328CSE+?
Choose MAX338CSE+T when the design requires the MAX338 family's low-leakage behavior and its 400 ohm maximum on-resistance. The Analog Devices manufacturer page identifies MAX328 as a similar device with lower leakage and charge injection but higher on-resistance. MAX328 may therefore be preferable when leakage dominates, while MAX338 is appropriate when the 400 ohm limit remains acceptable.
Is MAX338CSE+T suitable for a high-impedance measurement system?
The MAX338CSE+T is suitable for high-impedance measurement systems when its leakage, on-resistance, and charge injection meet the required error budget. Its specified maximum on-resistance is 400 ohm, and its low-leakage CMOS construction reduces unintended input current. Calculate the resulting settling and loading error against the sensor or source impedance before finalizing the design.
What is the MAX338CSE+T versus MAX339CSE+ difference?
The MAX338CSE+T is an 8-channel, single 8:1 mux, while the MAX339 is a dual 4-channel device. The MAX338/MAX339 family shares low-leakage CMOS construction and flexible supply operation, but the channel topology differs. Treat MAX339 as a topology change rather than an automatic functional replacement, and verify its terminal assignments against the PCB.
Where can I buy MAX338CSE+T online?
Use the Request a Quote form on this page to request MAX338CSE+T availability, current pricing, and lead time. The part is identified as an active 8:1, 400 ohm, 16-pin SOIC analog multiplexer. XAIPART can confirm the exact MAX338CSE+T suffix, reel configuration, and delivery schedule before order placement.
What is the price of MAX338CSE+T?
Submit the MAX338CSE+T Request a Quote form on this page for current pricing and quantity information. The quote covers the exact MAX338CSE+T tape-and-reel ordering code rather than a family-level or differently packaged variant. Pricing and lead time should be confirmed at the time of quotation.
What is the lead time and stock status for MAX338CSE+T?
Request current MAX338CSE+T stock status, minimum order quantity, and lead time through the Request a Quote form on this page. The product is a 16-pin narrow SOIC tape-and-reel ordering code in the MAX338 family. The quotation response should confirm availability for the exact suffix and the required production quantity.

داتای سەرچاوەی ئەندازیاری بۆ MAX338CSE+T — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose MAX338CSE+T when the PCB requires an 8:1 low-leakage CMOS mux in a 16-SOIC package, the signal path can tolerate a 400 ohm maximum on-resistance, and commercial-temperature operation is appropriate. MAX338ESE+T is preferred when the same electrical configuration and footprint are needed over an extended temperature range. Consider MAX328CSE+ when lower leakage and charge injection matter more than on-resistance. MAX318CSE+ can suit designs where a lower path resistance is more important than leakage. MAX329CSE+ and MAX339CSE+ use dual 4-channel arrangements, so they should be selected only after confirming common-terminal and channel assignments. For every candidate, verify voltage limits, TTL control levels, enable polarity, leakage, charge injection, and the absolute maximum ratings against the manufacturer datasheet.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە MAX338ESE+T MAX328CSE+ MAX329CSE+ MAX318CSE+ MAX339CSE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Multiplexer Topology 8:1 8:1 8:1 Dual 4:1 8:1 Dual 4:1

جیاکەرەوە سەرەکییەکان

  • Closest same-family temperature-grade alternative (بەراورد بەMAX338ESE+T)
  • Lower-leakage routing option (بەراورد بەMAX328CSE+)
  • Lower-resistance 8:1 family option (بەراورد بەMAX318CSE+)

تێبینییەکانی دیزاین

Do not assume that equal package dimensions guarantee equivalent mux behavior. Confirm the address inputs, enable input, common terminals, supply pins, and analog-channel assignments against the manufacturer pin-description table. The MAX338ESE+T is the closest family alternative, while MAX329CSE+ and MAX339CSE+ use dual 4-channel arrangements and require circuit-level verification before substitution.

Include the 400 ohm maximum on-resistance in the signal-path error budget, particularly when the selected source has high impedance. The effective path also contains leakage and switching charge injection. For precision measurements, calculate the maximum output error from source resistance, on-resistance, amplifier input impedance, and leakage, then use calibration if the resulting uncertainty exceeds the system requirement.

Place the MAX338 close to the selected signal source and downstream measurement circuit to minimize susceptibility to coupled noise on the routed analog node. Keep supply and ground connections short, provide local bypass capacitance according to the manufacturer's typical application, and avoid sharing sensitive analog paths with fast digital return currents. Maintain clear separation between address traces and the common analog output.

Select the single- or dual-supply configuration from the voltage range that must pass through the mux rather than only from the logic supply. The device accepts +4.5 V to +30 V single supply or ±4.5 V to ±20 V dual supply. When switching bipolar signals, check the common-mode and signal-level limits for the selected supply arrangement in the manufacturer datasheet.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the referenced material. AEC-Q100 is not applicable to this commercial interface IC.

داتا پشتڕاستکراوەتەوە لە: 2026-11-02 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

MAX338CSE+T datasheet MAX338CSE+T pinout MAX338CSE+T datasheet pdf Analog Devices MAX338CSE+T MAX338CSE+T 8:1 multiplexer MAX338CSE+T 400 ohm MAX338CSE+T 16-SOIC MAX338CSE+T equivalent MAX338CSE+T replacement MAX338CSE+T vs MAX338ESE+T MAX338CSE+T price MAX338CSE+T stock

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices Maxim Integrated MAX338CSE+T MAX338 MAX338ESE+T MAX328CSE+ MAX329CSE+ MAX318CSE+ MAX339CSE+ analog multiplexer analog switch interface IC CMOS 8:1 multiplexer dual 4-channel multiplexer low-leakage switch TTL-compatible control input on-resistance channel leakage current charge injection single supply dual supply 44 V silicon-gate process 16-SOIC package surface mount
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ