MCP3426A3-E/MC - 16-Bit 2-Channel Sigma-Delta ADC | Microchip
MPN: MCP3426A3-E/MC ✓ چالاکMCP3426A3-E/MC گشتی
An ADC converts continuous analog voltage signals into digital data that a microcontroller, DSP, or embedded control system can process. The MCP3426 belongs to the sigma-delta ADC family, which uses continuous-time oversampling and digital filtering to achieve high resolution from a compact converter. In the MCP3426, the two differential input channels give designers a way to measure two independent or related sensor outputs while preserving a compact, low-pin-count footprint.
The MCP3426A3-E/MC operates from 2.7 V to 5.5 V, supports an operating temperature range of -55 C to +125 C, and is specified as a 16-bit converter with a 15 SPS conversion rate. Its sigma-delta architecture is appropriate for slow-changing signals such as temperature, pressure, load-cell, potentiometer, and bridge-sensor outputs rather than high-bandwidth waveform acquisition.
The 8-DFN package makes the converter suitable for compact industrial and embedded boards. Because the package has a small exposed-pad arrangement and no-lead construction, PCB layout should follow the manufacturer land pattern and thermal recommendations exactly. Adequate input filtering, reference stability, and grounding are important when the ADC is used with low-level sensor signals.
Typical applications include two-channel process instrumentation, industrial sensor interfaces, portable measurement systems, and control boards that require high-resolution conversion at low throughput. The 15 SPS rate provides a useful balance between resolution and conversion speed for thermal, pressure, and resistive-sensor measurements.
When selecting this device, verify the channel configuration, differential input range, reference voltage, conversion timing, and package land pattern against the manufacturer datasheet. Use the manufacturer pin-description table when assigning PCB tracks, and confirm the exposed-pad connection and thermal-via layout for reliable operation across the extended temperature range.
جێگرەوەکانی جێگۆڕکێ بۆ MCP3426A3-E/MC — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ MCP3426A3-E/MC (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Differential Input Range, Package, Resolution.
MCP3426A3T-E/MC
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MCP3426A7T-E/MC
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
MCP3426A3-E/MC زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 16 bit |
| Number of Analog Input Channels | 2 |
| Converter Architecture | 1 Sigma-Delta |
| Maximum Conversion Rate | 15 SPS |
| Minimum Supply Voltage | 2.7 V |
| Maximum Supply Voltage | 5.5 V |
| Minimum Operating Temperature | -55 C |
| Maximum Operating Temperature | 125 C |
| Number of Terminals | 8 |
| Package Type | 8-DFN (2 x 3 mm) |
| Package Code | HVSON |
| Terminal Form | No lead |
| Package Shape | Rectangular |
| جۆری دامەزراندن | Surface Mount |
| Temperature Grade | Automotive |
ڕێنمایی ڕێکخستنی پینی MCP3426A3-E/MC rectangular
ڕێکخستنی پین بۆ MCP3426A3-E/MC (پاکێجی rectangular). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ MCP3426A3-E/MC.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
MCP3426A3-E/MC گونجاوە بۆ 6 بەکارھێنانs: Industrial Temperature Sensor Interface, Pressure and Load-Cell Instrumentation, Battery-Powered Environmental Monitoring, Process Control Analog Front End, Precision Portable Measurement Instrument, Automotive Sensor Monitoring Node.
Industrial Temperature Sensor Interface
The MCP3426A3-E/MC fits slow-moving temperature measurements because it combines 16-bit resolution with a 15 SPS conversion rate. Its 2.7 V to 5.5 V operating range supports 3.3 V industrial controller rails, while its -55 C to +125 C specification covers demanding environments. Two analog input channels allow one controller to monitor a temperature sensor and a second process variable. Place the converter close to the sensor input, use filtered shielded routing, and provide a stable reference to preserve the low-level resolution that distinguishes temperature measurement from basic threshold sensing.
پێشنیارکراو
Pressure and Load-Cell Instrumentation
The MCP3426A3-E/MC is appropriate for pressure transducers and resistive load cells whose output changes more slowly than the converter's 15 SPS throughput. The 16-bit sigma-delta core preserves fine code detail, and the dual-input arrangement can support related bridge or differential measurements. Place the front-end amplifier and input filtering close to the converter to minimize noise pickup between the bridge and ADC inputs. Confirm the permitted common-mode and differential input range in the manufacturer datasheet before selecting front-end gain and protection components.
پێشنیارکراو
Battery-Powered Environmental Monitoring
The MCP3426A3-E/MC supports compact environmental-monitoring nodes that periodically measure light, gas, or resistive sensors rather than sampling continuous waveforms. Its low-voltage 2.7 V to 5.5 V supply range allows operation from a regulated 3.3 V sensor rail, and the dual-channel configuration reduces the number of separate converters needed. Because the 8-DFN (2 x 3 mm) package is compact, it saves board area, although the exposed pad still requires the recommended via arrangement for reliable thermal performance.
پێشنیارکراو
Process Control Analog Front End
The MCP3426A3-E/MC can serve as the measurement front end in an industrial process-control board monitoring pressure, level, or flow-related analog inputs. A 16-bit conversion result provides high code density for small process changes, while two channels support redundant or complementary measurements. The 15 SPS rate is appropriate for closed-loop variables with seconds-scale response times, not for transient waveforms. Use separate analog and digital return paths, low-noise reference routing, and input protection appropriate to the field wiring.
پێشنیارکراو
Precision Portable Measurement Instrument
The MCP3426A3-E/MC fits portable meters and handheld analyzers that need readable resolution from compact sensor channels. The 8-DFN (2 x 3 mm) package helps reduce instrument size, while the 16-bit resolution supports fine measurement steps across two inputs. Its supply range permits operation from a 3.3 V or 5 V system, and its -55 C to +125 C rating supports harsh operating conditions. Account for sensor excitation drift, reference accuracy, and analog filtering when defining the instrument's total measurement error.
پێشنیارکراو
Automotive Sensor Monitoring Node
The MCP3426A3-E/MC is suitable for slow-changing automotive sensor nodes because it offers 16-bit resolution, two channels, and a -55 C to +125 C operating range. It can monitor pressure, temperature, or resistive sensors in a vehicle electronics module while running from a regulated 5 V rail. The compact 8-DFN package supports dense ECU layouts. Confirm the exact AEC-Q100 qualification status, automotive qualification level, and electrical limits in the manufacturer documentation before releasing the module for production.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ MCP3426A3-E/MC — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | MCP3426A3T-E/MC | MCP3426A7T-E/MC |
|---|---|---|---|
| Package | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Resolution | 16 bit | 16 bit | 16 bit |
| Number of Analog Input Channels | 2 | 2 | 2 |
| Converter Architecture | 1 Sigma-Delta | 1 Sigma-Delta | 1 Sigma-Delta |
| Ordering Code Difference | -E/MC | -T-E/MC tape-and-reel ordering code | A7 gain-channel configuration |
جیاکەرەوە سەرەکییەکان
- Direct same-footprint sourcing option (بەراورد بەMCP3426A3T-E/MC)
- Extended-temperature 16-bit conversion (بەراورد بەMCP3426A3T-E/MC)
- Compact two-channel measurement footprint (بەراورد بەMCP3426A7T-E/MC)
تێبینییەکانی دیزاین
Route analog inputs directly from the sensor or front-end amplifier to the ADC pins, with no shared traces between channels. Keep the two analog inputs away from switching nodes, clock lines, and high-current return paths. Place the input filtering capacitors at the converter end of the traces so that track inductance does not couple transient noise directly into the measurement inputs.
Use the Microchip 8-DFN land pattern and follow the exposed-pad connection instructions exactly. The 2 x 3 mm no-lead package has limited thermal escape area, so provide the recommended exposed-pad copper and via arrangement. Verify courtyard clearance, paste stencil aperture, and reflow profile during PCB assembly; an incorrect pad definition can prevent reliable soldering.
Do not select a package-only substitute without checking the conversion configuration. MCP3426A3-E/SN uses 8-SOIC, and MCP3426A3-E/MS uses 8-MSOP, so neither can replace the 8-DFN footprint without a PCB change. Also verify the input common-mode range against the sensor output; a converter can satisfy its supply-voltage rating while still rejecting an out-of-range input signal.
زانیاری پابەندبوون
The Vyrian listing identifies an automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is available for this exact MPN.