MCP3426A3-E/MC - 16-Bit 2-Channel Sigma-Delta ADC | Microchip
部品番号: MCP3426A3-E/MC ✓ 生産中MCP3426A3-E/MC 概要
An ADC converts continuous analog voltage signals into digital data that a microcontroller, DSP, or embedded control system can process. The MCP3426 belongs to the sigma-delta ADC family, which uses continuous-time oversampling and digital filtering to achieve high resolution from a compact converter. In the MCP3426, the two differential input channels give designers a way to measure two independent or related sensor outputs while preserving a compact, low-pin-count footprint.
The MCP3426A3-E/MC operates from 2.7 V to 5.5 V, supports an operating temperature range of -55 C to +125 C, and is specified as a 16-bit converter with a 15 SPS conversion rate. Its sigma-delta architecture is appropriate for slow-changing signals such as temperature, pressure, load-cell, potentiometer, and bridge-sensor outputs rather than high-bandwidth waveform acquisition.
The 8-DFN package makes the converter suitable for compact industrial and embedded boards. Because the package has a small exposed-pad arrangement and no-lead construction, PCB layout should follow the manufacturer land pattern and thermal recommendations exactly. Adequate input filtering, reference stability, and grounding are important when the ADC is used with low-level sensor signals.
Typical applications include two-channel process instrumentation, industrial sensor interfaces, portable measurement systems, and control boards that require high-resolution conversion at low throughput. The 15 SPS rate provides a useful balance between resolution and conversion speed for thermal, pressure, and resistive-sensor measurements.
When selecting this device, verify the channel configuration, differential input range, reference voltage, conversion timing, and package land pattern against the manufacturer datasheet. Use the manufacturer pin-description table when assigning PCB tracks, and confirm the exposed-pad connection and thermal-via layout for reliable operation across the extended temperature range.
ドロップイン代替品: MCP3426A3-E/MC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCP3426A3-E/MC (同一形状・フットプリント) — 相違点: Differential Input Range, Package, Resolution.
MCP3426A3T-E/MC
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MCP3426A7T-E/MC
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MCP3426A3-E/MC 最大定格&電気的特性
| 分解能 | 16 bit |
| Number of Analog Input Channels | 2 |
| Converter Architecture | 1 Sigma-Delta |
| Maximum Conversion Rate | 15 SPS |
| Minimum Supply Voltage | 2.7 V |
| Maximum Supply Voltage | 5.5 V |
| Minimum Operating Temperature | -55 C |
| Maximum Operating Temperature | 125 C |
| Number of Terminals | 8 |
| Package Type | 8-DFN (2 x 3 mm) |
| Package Code | HVSON |
| Terminal Form | No lead |
| Package Shape | Rectangular |
| 実装タイプ | Surface Mount |
| Temperature Grade | Automotive |
MCP3426A3-E/MC rectangular ピン配置ガイド
MCP3426A3-E/MC (rectangular パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: MCP3426A3-E/MC.
詳細は データシート をご参照ください。
主な用途
MCP3426A3-E/MC の用途: 6 件s: Industrial Temperature Sensor Interface, Pressure and Load-Cell Instrumentation, Battery-Powered Environmental Monitoring, Process Control Analog Front End, Precision Portable Measurement Instrument, Automotive Sensor Monitoring Node.
Industrial Temperature Sensor Interface
The MCP3426A3-E/MC fits slow-moving temperature measurements because it combines 16-bit resolution with a 15 SPS conversion rate. Its 2.7 V to 5.5 V operating range supports 3.3 V industrial controller rails, while its -55 C to +125 C specification covers demanding environments. Two analog input channels allow one controller to monitor a temperature sensor and a second process variable. Place the converter close to the sensor input, use filtered shielded routing, and provide a stable reference to preserve the low-level resolution that distinguishes temperature measurement from basic threshold sensing.
おすすめ
Pressure and Load-Cell Instrumentation
The MCP3426A3-E/MC is appropriate for pressure transducers and resistive load cells whose output changes more slowly than the converter's 15 SPS throughput. The 16-bit sigma-delta core preserves fine code detail, and the dual-input arrangement can support related bridge or differential measurements. Place the front-end amplifier and input filtering close to the converter to minimize noise pickup between the bridge and ADC inputs. Confirm the permitted common-mode and differential input range in the manufacturer datasheet before selecting front-end gain and protection components.
おすすめ
Battery-Powered Environmental Monitoring
The MCP3426A3-E/MC supports compact environmental-monitoring nodes that periodically measure light, gas, or resistive sensors rather than sampling continuous waveforms. Its low-voltage 2.7 V to 5.5 V supply range allows operation from a regulated 3.3 V sensor rail, and the dual-channel configuration reduces the number of separate converters needed. Because the 8-DFN (2 x 3 mm) package is compact, it saves board area, although the exposed pad still requires the recommended via arrangement for reliable thermal performance.
おすすめ
Process Control Analog Front End
The MCP3426A3-E/MC can serve as the measurement front end in an industrial process-control board monitoring pressure, level, or flow-related analog inputs. A 16-bit conversion result provides high code density for small process changes, while two channels support redundant or complementary measurements. The 15 SPS rate is appropriate for closed-loop variables with seconds-scale response times, not for transient waveforms. Use separate analog and digital return paths, low-noise reference routing, and input protection appropriate to the field wiring.
おすすめ
Precision Portable Measurement Instrument
The MCP3426A3-E/MC fits portable meters and handheld analyzers that need readable resolution from compact sensor channels. The 8-DFN (2 x 3 mm) package helps reduce instrument size, while the 16-bit resolution supports fine measurement steps across two inputs. Its supply range permits operation from a 3.3 V or 5 V system, and its -55 C to +125 C rating supports harsh operating conditions. Account for sensor excitation drift, reference accuracy, and analog filtering when defining the instrument's total measurement error.
おすすめ
Automotive Sensor Monitoring Node
The MCP3426A3-E/MC is suitable for slow-changing automotive sensor nodes because it offers 16-bit resolution, two channels, and a -55 C to +125 C operating range. It can monitor pressure, temperature, or resistive sensors in a vehicle electronics module while running from a regulated 5 V rail. The compact 8-DFN package supports dense ECU layouts. Confirm the exact AEC-Q100 qualification status, automotive qualification level, and electrical limits in the manufacturer documentation before releasing the module for production.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCP3426A3-E/MC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCP3426A3T-E/MC | MCP3426A7T-E/MC |
|---|---|---|---|
| Package | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Resolution | 16 bit | 16 bit | 16 bit |
| Number of Analog Input Channels | 2 | 2 | 2 |
| Converter Architecture | 1 Sigma-Delta | 1 Sigma-Delta | 1 Sigma-Delta |
| Ordering Code Difference | -E/MC | -T-E/MC tape-and-reel ordering code | A7 gain-channel configuration |
主な差別化要因
- Direct same-footprint sourcing option (vs MCP3426A3T-E/MC)
- Extended-temperature 16-bit conversion (vs MCP3426A3T-E/MC)
- Compact two-channel measurement footprint (vs MCP3426A7T-E/MC)
設計ノート
Route analog inputs directly from the sensor or front-end amplifier to the ADC pins, with no shared traces between channels. Keep the two analog inputs away from switching nodes, clock lines, and high-current return paths. Place the input filtering capacitors at the converter end of the traces so that track inductance does not couple transient noise directly into the measurement inputs.
Use the Microchip 8-DFN land pattern and follow the exposed-pad connection instructions exactly. The 2 x 3 mm no-lead package has limited thermal escape area, so provide the recommended exposed-pad copper and via arrangement. Verify courtyard clearance, paste stencil aperture, and reflow profile during PCB assembly; an incorrect pad definition can prevent reliable soldering.
Do not select a package-only substitute without checking the conversion configuration. MCP3426A3-E/SN uses 8-SOIC, and MCP3426A3-E/MS uses 8-MSOP, so neither can replace the 8-DFN footprint without a PCB change. Also verify the input common-mode range against the sensor output; a converter can satisfy its supply-voltage rating while still rejecting an out-of-range input signal.
コンプライアンス情報
The Vyrian listing identifies an automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is available for this exact MPN.