Microchip Technology

MCP3426A3-E/MC - 16-Bit 2-Channel Sigma-Delta ADC | Microchip

부품 번호: MCP3426A3-E/MC ✓ 활성
2.7 V Vdss 8-DFN (2 x 3 mm) Package
MOQ: 1 |

MCP3426A3-E/MC 개요

The Microchip Technology MCP3426A3-E/MC is a 16-bit, 2-channel sigma-delta analog-to-digital converter (ADC) with a conversion rate of up to 15 samples per second, housed in an 8-DFN (2 x 3 mm) package. The device is designed for low-speed precision measurement systems where dual analog inputs must be converted into high-resolution digital values for sensor monitoring, process control, instrumentation, and industrial data acquisition.

An ADC converts continuous analog voltage signals into digital data that a microcontroller, DSP, or embedded control system can process. The MCP3426 belongs to the sigma-delta ADC family, which uses continuous-time oversampling and digital filtering to achieve high resolution from a compact converter. In the MCP3426, the two differential input channels give designers a way to measure two independent or related sensor outputs while preserving a compact, low-pin-count footprint.

The MCP3426A3-E/MC operates from 2.7 V to 5.5 V, supports an operating temperature range of -55 C to +125 C, and is specified as a 16-bit converter with a 15 SPS conversion rate. Its sigma-delta architecture is appropriate for slow-changing signals such as temperature, pressure, load-cell, potentiometer, and bridge-sensor outputs rather than high-bandwidth waveform acquisition.

The 8-DFN package makes the converter suitable for compact industrial and embedded boards. Because the package has a small exposed-pad arrangement and no-lead construction, PCB layout should follow the manufacturer land pattern and thermal recommendations exactly. Adequate input filtering, reference stability, and grounding are important when the ADC is used with low-level sensor signals.

Typical applications include two-channel process instrumentation, industrial sensor interfaces, portable measurement systems, and control boards that require high-resolution conversion at low throughput. The 15 SPS rate provides a useful balance between resolution and conversion speed for thermal, pressure, and resistive-sensor measurements.

When selecting this device, verify the channel configuration, differential input range, reference voltage, conversion timing, and package land pattern against the manufacturer datasheet. Use the manufacturer pin-description table when assigning PCB tracks, and confirm the exposed-pad connection and thermal-via layout for reliable operation across the extended temperature range.

드롭인 대체품: MCP3426A3-E/MC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MCP3426A3-E/MC (동일 폼 팩터 및 풋프린트) — 차이점: Differential Input Range, Package, Resolution.

Microchip Technology
Differential Input Range: ±2.048 V
Package: 8-DFN (2 x 3 mm)
Microchip Technology
Differential Input Range: +/-2.048 V
Package: 8-DFN, 2 x 3 mm
Resolution: 16 bits

MCP3426A3T-E/MC

✅ 드롭인
📦 8-DFN (2 x 3 mm)
Same MCP3426A3 device and 8-DFN (2 x 3 mm) footprint; difference is the -T tape-and-reel packaging code, with 0% change in the listed 16-bit resolution, 2-channel count, and 15 SPS rate

📋 참조 대체품 (카탈로그에 없음)

MCP3426A7T-E/MC

✅ 드롭인
📦 8-DFN (2 x 3 mm)
Same 8-DFN family footprint and MCP3426 converter platform; the A7 gain-channel variant changes internal gain configuration, while the 16-bit sigma-delta core remains comparable

📋 참조 대체품 (카탈로그에 없음)

MCP3426A3-E/MC 최대 정격 & 전기적 특성

분해능 16 bit
Number of Analog Input Channels 2
Converter Architecture 1 Sigma-Delta
Maximum Conversion Rate 15 SPS
Minimum Supply Voltage 2.7 V
Maximum Supply Voltage 5.5 V
Minimum Operating Temperature -55 C
Maximum Operating Temperature 125 C
Number of Terminals 8
Package Type 8-DFN (2 x 3 mm)
Package Code HVSON
Terminal Form No lead
Package Shape Rectangular
실장 유형 Surface Mount
Temperature Grade Automotive

MCP3426A3-E/MC rectangular 핀 구성 가이드

MCP3426A3-E/MC(rectangular 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

MCP3426A3-E/MC의 rectangular 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MCP3426A3-E/MC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MCP3426A3-E/MC 적합 용도: 6 애플리케이션s: Industrial Temperature Sensor Interface, Pressure and Load-Cell Instrumentation, Battery-Powered Environmental Monitoring, Process Control Analog Front End, Precision Portable Measurement Instrument, Automotive Sensor Monitoring Node.

🌡️

Industrial Temperature Sensor Interface

The MCP3426A3-E/MC fits slow-moving temperature measurements because it combines 16-bit resolution with a 15 SPS conversion rate. Its 2.7 V to 5.5 V operating range supports 3.3 V industrial controller rails, while its -55 C to +125 C specification covers demanding environments. Two analog input channels allow one controller to monitor a temperature sensor and a second process variable. Place the converter close to the sensor input, use filtered shielded routing, and provide a stable reference to preserve the low-level resolution that distinguishes temperature measurement from basic threshold sensing.

🏭

Pressure and Load-Cell Instrumentation

The MCP3426A3-E/MC is appropriate for pressure transducers and resistive load cells whose output changes more slowly than the converter's 15 SPS throughput. The 16-bit sigma-delta core preserves fine code detail, and the dual-input arrangement can support related bridge or differential measurements. Place the front-end amplifier and input filtering close to the converter to minimize noise pickup between the bridge and ADC inputs. Confirm the permitted common-mode and differential input range in the manufacturer datasheet before selecting front-end gain and protection components.

🧩

Battery-Powered Environmental Monitoring

The MCP3426A3-E/MC supports compact environmental-monitoring nodes that periodically measure light, gas, or resistive sensors rather than sampling continuous waveforms. Its low-voltage 2.7 V to 5.5 V supply range allows operation from a regulated 3.3 V sensor rail, and the dual-channel configuration reduces the number of separate converters needed. Because the 8-DFN (2 x 3 mm) package is compact, it saves board area, although the exposed pad still requires the recommended via arrangement for reliable thermal performance.

🏭

Process Control Analog Front End

The MCP3426A3-E/MC can serve as the measurement front end in an industrial process-control board monitoring pressure, level, or flow-related analog inputs. A 16-bit conversion result provides high code density for small process changes, while two channels support redundant or complementary measurements. The 15 SPS rate is appropriate for closed-loop variables with seconds-scale response times, not for transient waveforms. Use separate analog and digital return paths, low-noise reference routing, and input protection appropriate to the field wiring.

📱

Precision Portable Measurement Instrument

The MCP3426A3-E/MC fits portable meters and handheld analyzers that need readable resolution from compact sensor channels. The 8-DFN (2 x 3 mm) package helps reduce instrument size, while the 16-bit resolution supports fine measurement steps across two inputs. Its supply range permits operation from a 3.3 V or 5 V system, and its -55 C to +125 C rating supports harsh operating conditions. Account for sensor excitation drift, reference accuracy, and analog filtering when defining the instrument's total measurement error.

🚗

Automotive Sensor Monitoring Node

The MCP3426A3-E/MC is suitable for slow-changing automotive sensor nodes because it offers 16-bit resolution, two channels, and a -55 C to +125 C operating range. It can monitor pressure, temperature, or resistive sensors in a vehicle electronics module while running from a regulated 5 V rail. The compact 8-DFN package supports dense ECU layouts. Confirm the exact AEC-Q100 qualification status, automotive qualification level, and electrical limits in the manufacturer documentation before releasing the module for production.

What is the conversion rate of the MCP3426A3-E/MC?
The MCP3426A3-E/MC provides a maximum conversion rate of 15 samples per second. According to the Mouser product listing for this exact MPN, it is a dual-channel 16-bit delta-sigma ADC rated at 15 SPS. This rate is suited to slowly changing sensor signals such as temperature, pressure, and resistive bridges rather than high-bandwidth signal acquisition.
How many channels and bits does the MCP3426A3-E/MC have?
The MCP3426A3-E/MC has 2 analog input channels and a resolution of 16 bit. The DigiKey listing identifies the device as a 16-bit, 2-input, 1-sigma-delta converter, while the manufacturer series documentation defines the MCP3426 family as a dual-channel sigma-delta ADC family. The two-channel arrangement allows simultaneous design space for paired sensors or related measurements.
What is the supply voltage range of the MCP3426A3-E/MC?
The MCP3426A3-E/MC operates from 2.7 V to 5.5 V. The FindIC comparison data for this exact device reports a 2.7 V minimum and 5.5 V maximum operating supply voltage. This range allows the converter to be used in both 3.3 V and 5 V systems, subject to the reference and analog-signal limits in the manufacturer datasheet.
What package does the MCP3426A3-E/MC use?
The MCP3426A3-E/MC is supplied in an 8-DFN (2 x 3 mm) no-lead package. DigiKey identifies the package as 8-DFN (2x3), and the Vyrian listing specifies 8 terminals, rectangular package shape, and HVSON package code. Use the Microchip land pattern and exposed-pad guidance when laying out the PCB.
What is the operating temperature range of the MCP3426A3-E/MC?
The MCP3426A3-E/MC is specified for -55 C to +125 C operation. The exact-device comparison data states this minimum and maximum operating temperature. The wide temperature range makes the converter suitable for industrial and automotive-grade measurement environments when the complete board-level design is qualified for the intended conditions.
Where can I download the MCP3426A3-E/MC datasheet PDF?
The manufacturer datasheet is available from Microchip Technology through the MCP3426 product documentation and the linked manufacturer product page. The distributor listing for MCP3426A3-E/MC provides access to the same technical document. Use the pin-description table, electrical characteristics, and recommended application circuit from the manufacturer datasheet when finalizing the design.
Where can I find the MCP3426A3-E/MC pinout?
The MCP3426A3-E/MC pinout is defined in the pin-configuration section of the manufacturer datasheet. The device has 8 terminals in an 8-DFN (2 x 3 mm) package with a no-lead construction and an exposed thermal-pad arrangement. Assign PCB tracks from the manufacturer pin-description table and land pattern rather than relying on a generic package drawing.
Can MCP3426A3T-E/MC replace MCP3426A3-E/MC?
MCP3426A3T-E/MC is a tape-and-reel ordering variant of the same MCP3426A3-E/MC device and uses the same 8-DFN (2 x 3 mm) package. It is appropriate when the only change is reel packaging for automated assembly. Verify that the variant is qualified for the same temperature, qualification, and ordering requirements as the original design.
What is the best drop-in replacement for the MCP3426A3-E/MC?
The closest confirmed drop-in choice is MCP3426A3T-E/MC because it retains the same device designation and 8-DFN (2 x 3 mm) footprint while changing the reel packaging code. Other MCP3426 suffixes use different packages, such as 8-SOIC or 8-MSOP, and therefore are not drop-in replacements without a PCB change. Confirm production requirements before substituting.
Is the MCP3426A3-E/MC suitable for temperature sensor measurement?
Yes, the MCP3426A3-E/MC is a practical choice for low-rate temperature sensing because it combines 16-bit resolution with a 15 SPS conversion rate. Its 2.7 V to 5.5 V supply range supports embedded 3.3 V systems, while the -55 C to +125 C rating covers demanding environments. Connect the sensor through suitable filtering and follow the manufacturer input-conditioning guidance.
Is the MCP3426A3-E/MC suitable for pressure and bridge sensor measurement?
The MCP3426A3-E/MC is well matched to pressure and resistive-bridge sensors that change slowly compared with the converter bandwidth. Two analog input channels support paired sensing or differential measurement arrangements, and 16-bit resolution preserves low-level signal detail. Use a stable reference, low-noise front end, and the manufacturer differential-input connection guidance.
When should I choose the MCP3426A3-E/MC over a faster ADC?
Choose the MCP3426A3-E/MC when the measured signals change slowly and high resolution matters more than sampling speed. Its 16-bit sigma-delta architecture and 15 SPS rate suit temperature, pressure, load-cell, and industrial process signals. Select a faster ADC instead when the application must capture transients, waveforms, or high-bandwidth communication data.
Where can I buy the MCP3426A3-E/MC and check its lead time?
Use the Request a Quote form on this page to request the MCP3426A3-E/MC price, stock confirmation, and current lead time. The form connects directly with the XAIPART sales workflow and avoids relying on an outdated catalog price. Provide the required quantity, reel or tray packaging preference, and target delivery date with the request.
What is the price of the MCP3426A3-E/MC?
Current pricing for the MCP3426A3-E/MC is obtained through the Request a Quote form on this page. The structured price fields update from current channel data, so a fixed figure in a static datasheet-style table would quickly become obsolete. Submit your required quantity and delivery terms to receive the applicable quotation and availability confirmation.
Is the MCP3426A3-E/MC in stock?
Current stock for the MCP3426A3-E/MC is confirmed through the Request a Quote form on this page. Inventory changes by package configuration, order quantity, and supplier channel, so request the exact MPN and required reel quantity for a live allocation. The purchase request can also include your required delivery date for production planning.

엔지니어링 참조 데이터: MCP3426A3-E/MC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MCP3426A3-E/MC for compact, low-rate precision measurements where two analog channels, 16-bit resolution, and an extended -55 C to +125 C temperature range are required. It is a natural fit for temperature, pressure, load-cell, and resistive process sensors because its 15 SPS rate prioritizes resolution over waveform bandwidth. Use MCP3426A3T-E/MC when the electrical device is unchanged and only reel packaging or the ordering code needs to vary; the same 8-DFN footprint allows a direct board-level substitution. Consider MCP3426A7T-E/MC only when its A7 gain configuration matches the required front end, and confirm the gain, reference, input-range, and conversion-timing details in the manufacturer datasheet. For waveform capture, communications, or signals changing faster than the MCP3426 conversion rate, choose a faster ADC instead.

대체품과의 비교

파라미터 이 제품 MCP3426A3T-E/MC MCP3426A7T-E/MC
Package 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm)
Brand Microchip Technology Microchip Technology Microchip Technology
Resolution 16 bit 16 bit 16 bit
Number of Analog Input Channels 2 2 2
Converter Architecture 1 Sigma-Delta 1 Sigma-Delta 1 Sigma-Delta
Ordering Code Difference -E/MC -T-E/MC tape-and-reel ordering code A7 gain-channel configuration

주요 차별점

  • Direct same-footprint sourcing option (vs MCP3426A3T-E/MC)
  • Extended-temperature 16-bit conversion (vs MCP3426A3T-E/MC)
  • Compact two-channel measurement footprint (vs MCP3426A7T-E/MC)

설계 노트

Route analog inputs directly from the sensor or front-end amplifier to the ADC pins, with no shared traces between channels. Keep the two analog inputs away from switching nodes, clock lines, and high-current return paths. Place the input filtering capacitors at the converter end of the traces so that track inductance does not couple transient noise directly into the measurement inputs.

Use the Microchip 8-DFN land pattern and follow the exposed-pad connection instructions exactly. The 2 x 3 mm no-lead package has limited thermal escape area, so provide the recommended exposed-pad copper and via arrangement. Verify courtyard clearance, paste stencil aperture, and reflow profile during PCB assembly; an incorrect pad definition can prevent reliable soldering.

Do not select a package-only substitute without checking the conversion configuration. MCP3426A3-E/SN uses 8-SOIC, and MCP3426A3-E/MS uses 8-MSOP, so neither can replace the 8-DFN footprint without a PCB change. Also verify the input common-mode range against the sensor output; a converter can satisfy its supply-voltage rating while still rejecting an out-of-range input signal.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The Vyrian listing identifies an automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is available for this exact MPN.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MCP3426A3-E/MC MCP3426A3-E/MC datasheet MCP3426A3-E/MC datasheet pdf MCP3426A3-E/MC pinout Microchip MCP3426A3-E/MC MCP3426A3 16 bit ADC MCP3426A3 15 SPS MCP3426A3 8 DFN pinout MCP3426A3 equivalent MCP3426A3 replacement MCP3426A3-E/MC vs MCP3426A3T-E/MC MCP3426A3-E/MC price MCP3426A3-E/MC stock MCP3426A3 sigma delta ADC application

관련 부품 & 용어

Microchip Technology MCP3426A3-E/MC MCP3426A3T-E/MC MCP3426A7T-E/MC MCP3426 analog-to-digital converter ADC sigma-delta ADC delta-sigma converter 16-bit resolution 2 analog input channels 15 SPS 2.7 V to 5.5 V supply 8-DFN 2 x 3 mm package no-lead package exposed thermal pad surface mount temperature sensor interface pressure sensor measurement load-cell measurement industrial process control battery-powered measurement automotive sensor monitoring MCP6004-I/SL MCP6033-E/MC
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기