NE5534AD - 30V 10MHz Low-Noise Amplifier | onsemi
MPN: NE5534AD ✗ کۆتایی ژیانNE5534AD گشتی
جێگرەوەکانی جێگۆڕکێ بۆ NE5534AD — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ NE5534AD (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Amplifier Type, Equivalent Input Noise Voltage, Peak-to-Peak Output Voltage Swing, Mounting Type.
NE5534P
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →NE5534DR2
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →NE5534D
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →NE5534ADR2
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →NE5534ADR2
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →NE5534AD زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Single operational amplifier |
| Supply Voltage Rating | 30 V |
| Gain-Bandwidth Product | 10 MHz |
| Equivalent Input Noise Voltage | 6 nV/√Hz |
| Number of Circuits | 1 circuit |
| پاکێج | 8-pin SOIC |
| Amplifier Type | General-purpose operational amplifier |
| Input Protection | Input-protection diodes |
| Output Protection | Output short-circuit protection |
| Offset Nulling | Offset-voltage nulling through BALANCE and COMP/BAL pins |
| External Compensation | External compensation capable |
| Audio Application | Low-noise audio applications |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی NE5534AD 8-pin soic
ڕێکخستنی پین بۆ NE5534AD (پاکێجی 8-pin soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ NE5534AD.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
NE5534AD گونجاوە بۆ 6 بەکارھێنانs: Low-noise microphone preamplifier, Audio mixer and volume-control stage, Active audio filter, Precision signal conditioning, Test and measurement front end, Industrial control and sensor interface.
Low-noise microphone preamplifier
The NE5534AD fits low-level microphone preamplifier stages because its verified 6 nV/√Hz equivalent input noise supports quiet signal capture, while the 10 MHz gain-bandwidth product provides more bandwidth than is normally required in the audio band. Place the amplifier in an 8-SOIC circuit with the feedback network selected for the intended gain and compensation method, and account for source impedance when estimating total noise. The 30-V supply rating accommodates traditional audio supply arrangements, but input common-mode range and output swing must be checked against the actual biasing arrangement.
پێشنیارکراو
Audio mixer and volume-control stage
The NE5534AD is appropriate for audio mixer and volume-control circuitry where low noise and low distortion are more important than minimum power consumption. Its 6 nV/√Hz noise specification helps preserve quiet operation in a gain stage, while the 10 MHz gain-bandwidth product allows practical feedback-network designs for audio frequencies below the amplifier's bandwidth limit. Check the complete datasheet for output swing, slew rate, and compensation requirements. The 8-SOIC package is convenient for legacy and mixed-signal boards requiring a single-amplifier outline.
پێشنیارکراو
Active audio filter
The NE5534AD can be used in active audio filters because its 10 MHz gain-bandwidth product leaves substantial margin above typical audio crossover and equalizer frequencies. The 6 nV/√Hz input-noise specification is valuable when filter stages operate before the signal becomes large enough to mask amplifier noise. Design the resistor and capacitor network around the required corner frequency, then verify stability and distortion using the manufacturer's compensation and output-load guidance. The single-amplifier 8-SOIC format allows each filter section to be implemented independently.
پێشنیارکراو
Precision signal conditioning
The NE5534AD is suitable for precision analog signal conditioning when the signal bandwidth is modest and the circuit benefits from a low-noise bipolar amplifier. The verified 30-V maximum supply rating provides headroom for conventional industrial and instrumentation rails, while 10 MHz bandwidth supports closed-loop audio and general-purpose feedback designs. Input offset voltage, bias current, common-mode limits, and output swing are not present in the supplied excerpt and must be checked in the datasheet. Use low-leakage feedback resistors when source impedance is high.
پێشنیارکراو
Test and measurement front end
The NE5534AD can serve as a low-noise front end in test and measurement equipment when the measured signal is within the amplifier's audio-band capabilities. Its 6 nV/√Hz equivalent input noise is helpful for reducing added noise before downstream conversion, and the 10 MHz gain-bandwidth product is sufficient for many low- and mid-frequency measurement paths. Verify input bias current for high-impedance sensors, use stable compensation, and confirm output settling and swing from the complete manufacturer document. The 8-SOIC package supports compact analog front-end boards.
پێشنیارکراو
Industrial control and sensor interface
The NE5534AD is a candidate for industrial control and sensor-interface circuits operating at low or moderate bandwidth, provided the supply and common-mode limits fit the application. The 30-V rating is useful for legacy 24-V industrial systems when the amplifier's detailed operating limits permit that rail. The 6 nV/√Hz noise specification is favorable for low-level sensor conditioning, while the 10 MHz bandwidth leaves room for closed-loop design margin. Confirm input bias current, transient response, output drive, and protection requirements in the manufacturer datasheet before production release.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ NE5534AD — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | NE5534P | NE5534DR | NE5534D | NE5534A | NE5534ADR |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | onsemi | onsemi | onsemi | onsemi | Texas Instruments | Texas Instruments |
| Product Type | Single low-noise operational amplifier | NE5534A-family single amplifier | NE5534A-family single amplifier | NE5534A-family single amplifier | Single low-noise operational amplifier | NE5534A-family single amplifier |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
| Audio Application | Yes | Audio-family variant | Audio-family variant | Audio-family variant | Yes | Audio-family variant |
جیاکەرەوە سەرەکییەکان
- Low-noise audio positioning (بەراورد بەMC1458D)
- Established 30-V audio supply capability (بەراورد بەNE5534A)
- Single-amplifier 8-SOIC implementation (بەراورد بەNE5534P)
تێبینییەکانی دیزاین
The verified 30-V maximum supply rating does not by itself define the usable DC operating range. Confirm the recommended supply voltage, input common-mode limits, and output swing in the manufacturer datasheet. For ±15 V audio rails, check both rail magnitudes and the actual output waveform at the required load. Keep supply decoupling close to the device pins and verify that the selected bypass network does not destabilize the feedback loop. The datasheet's input-protection and short-circuit features should not be treated as substitutes for correct rail sequencing or adequate external protection.
Route the input, feedback, and compensation paths to minimize parasitic capacitance and pickup because the NE5534A family is intended for low-noise audio and precision analog use. Keep the ground return short and place the input and feedback components away from switching nodes and high-current paths. Because the family includes external-compensation capability and balance-related connections, preserve the exact reference-design pin connections rather than substituting a generic 8-pin amplifier layout. Confirm the physical pin numbering from the current datasheet before releasing the PCB.
Do not treat every 8-SOIC low-noise amplifier as a direct replacement for NE5534AD. Verify the pin functions, especially BALANCE and COMP/BAL, along with supply limits, noise voltage, bandwidth, offset voltage, bias current, slew rate, and output swing. A package match alone does not guarantee electrical or functional interchangeability. For a production substitution, compare the exact manufacturer suffix, temperature grade, lifecycle status, and RoHS or REACH documentation before approving the change.
زانیاری پابەندبوون
The supplied verified data does not explicitly provide compliance declarations for the exact NE5534AD manufacturer and suffix. Compliance status must be confirmed from the current manufacturer product page or declaration.