Texas Instruments

OPA551UA - 60V High-Current Operational Amplifier | Texas Instruments

MPN: OPA551UA ✓ چالاک
60 V Vdss 380 mA Id 8-pin SOIC Package 2 V Memory
MOQ: 1 |

OPA551UA گشتی

The Texas Instruments OPA551UA is a single, high-voltage, high-current operational amplifier with a 60 V maximum supply capability, 380 mA typical output current, and an 8-pin SOIC package. It combines a 3 MHz gain-bandwidth product with a 15 V/µs slew rate, making it suitable for demanding signal-conditioning and power-buffer stages operating from high-voltage rails.

An operational amplifier is a voltage-gain and signal-conditioning semiconductor that compares an inverting input with a non-inverting input and drives its output according to the feedback network. The OPA551 belongs to the operational-amplifier hierarchy, where its unusually high supply-voltage tolerance and output-current capability extend ordinary precision amplifier use into high-power industrial, audio, instrumentation, and motor-control systems.

The OPA551UA provides a wide supply range up to ±30 V, continuous output current up to 200 mA, and typical current capability of 380 mA. Its input noise density is 14 nV/√Hz, while unity-gain stability permits operation without a minimum gain setting. Output swing remains approximately 2 V from the supply rails, providing useful headroom for driving external transistors and other high-current loads.

The device also includes thermal shutdown, output-current limiting, and a thermal-shutdown indicator. Its 15 V/µs slew rate supports faster large-signal transitions than a general-purpose low-power amplifier, while the 3 MHz bandwidth is sufficient for audio, control, and instrumentation signals. The high-current output stage should still be evaluated against the thermal limits of the 8-pin SOIC package and the surrounding copper area.

Typical uses include audio power-buffer stages, high-voltage current-feedback circuits, industrial sensor interfaces, laboratory output stages, and power-converter control loops. Designers should also check input common-mode range, output swing, supply headroom, and thermal rise before fixing component values or external load limits.

For a stable implementation, use feedback that preserves unity-gain stability, place input and output components close to the device, and provide local supply bypassing. The exposed requirements for current and temperature must be validated with the actual PCB layout rather than inferred from nominal output-current capability alone.

This page combines the OPA551UA's principal electrical characteristics with package guidance, application-oriented design notes, comparison criteria, and drop-in replacement constraints. It provides a practical engineering view for selecting and implementing this high-voltage, high-current operational amplifier.

جێگرەوەکانی جێگۆڕکێ بۆ OPA551UA — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ OPA551UA (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Amplifier Type, Package, Slew Rate.

Texas Instruments
Amplifier Type: General Purpose / High-Voltage High-Current
Package: SOIC-8 (D)
Slew Rate: 15 V/us

OPA552UA

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 8-pin SOIC
Single operational amplifier · 60 V · 380 mA · 12 MHz · 24 V/µs · 5 · -40 °C to +125 °C · 8-pin SOIC

پەیوەندی بۆ نرخ

بینینی داتاشیت →

OPA551UA زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Amplifier Type Single operational amplifier
Maximum Supply Voltage 60 V
Typical Supply Voltage Range ±4 V to ±30 V
Typical Output Current 380 mA
Continuous Output Current 200 mA
Gain-Bandwidth Product 3 MHz
Slew Rate 15 V/µs
Input Noise Voltage Density 14 nV/√Hz
Output Swing from Supply Rail 2 V
Unity-Gain Stability Yes
Protection Features Thermal shutdown, output current limit, and thermal shutdown indicator
Number of Circuits 1 circuit
پاکێج 8-pin SOIC
جۆری دامەزراندن Surface mount

ڕێکخستنی پینی OPA551UA

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پین 1 NC — Not connected
پین 2 IN- — Inverting input
پین 3 IN+ — Non-inverting input
پین 4 V- — Negative supply connection
پین 5 NC — Not connected
پین 6 OUT — Output
پین 7 V+ — Positive supply connection
پین 8 NC — Not connected

بەکارهێنانە باوەکان

OPA551UA گونجاوە بۆ 6 بەکارھێنانs: High-Current Audio Buffer, Industrial Sensor Signal Conditioning, Power Converter Control Loop, Laboratory Instrumentation Output, Motor and Solenoid Drive Interface, Telephony and Communication Interface.

🎧

High-Current Audio Buffer

The OPA551UA fits an audio power-buffer stage that must operate from a high-voltage rail while driving a lower-impedance load. Its 200 mA continuous output current and 380 mA typical current capability provide substantially more drive than ordinary small-signal operational amplifiers, while the 15 V/µs slew rate supports audio-rate transients. Place the amplifier in a unity-gain or inverting feedback configuration around the 3 MHz bandwidth region, and confirm that the required peak voltage remains within the approximately 2 V-from-rail output swing. The main trade-off is heat: verify dissipation from the actual rail-to-rail voltage and load current, because the SOIC outline must dissipate internal loss without exceeding its temperature limits.

🏭

Industrial Sensor Signal Conditioning

OPA551UA is appropriate for industrial sensor-conditioning paths where source impedance is low and the next stage requires more current than a conventional precision operational amplifier can provide. Its 14 nV/√Hz input noise density is useful for low-noise amplification, while unity-gain stability permits a straightforward feedback arrangement. The ±4 V to ±30 V supply capability also accommodates protected, high-voltage acquisition systems better than low-voltage instrumentation amplifiers. Keep the selected feedback network within the device's stable operating region, account for the input common-mode limits, and route the return current directly to the device ground to avoid converting sensor-loop current into measurement error.

⚡

Power Converter Control Loop

OPA551UA can serve as the error amplifier or transient driver in a high-voltage power-conversion control loop when the design requires stronger output-drive capability than a standard controller IC. Its 15 V/µs slew rate permits faster loop response than many low-power amplifiers, and the 200 mA continuous output-current rating can drive comparator, feedback, or gate-drive networks more effectively than a low-power device. Compensation must account for the 3 MHz gain-bandwidth product and the amplifier's output-current limits. Verify the common-mode range at the feedback node and confirm that startup, saturation recovery, and maximum supply conditions do not force the output into the approximately 2 V-from-rail region.

🔧

Laboratory Instrumentation Output

The OPA551UA is useful in a laboratory output stage that must drive a moderately low-impedance instrument while accepting high-voltage command signals. Its unity-gain stability supports direct buffer use, and the combination of 3 MHz bandwidth, 15 V/µs slew rate, and 14 nV/√Hz input noise provides a practical balance between response speed and signal integrity. A transimpedance or voltage-buffer configuration can be selected according to the source impedance and required transfer function. Because the package is an 8-pin SOIC rather than a high-power package, calculate junction temperature from the worst-case dissipation and maintain copper area around the leads. The output must also remain within 2 V of either supply rail at maximum command voltage.

🏭

Motor and Solenoid Drive Interface

OPA551UA can form the voltage-buffer or error-amplifier interface between a control signal and a high-current transistor stage. Its output-current capability is better matched to driving external power devices than a conventional low-power op amp, while the high-voltage operation permits use in elevated industrial supply systems. The OPA551 itself should not be treated as an unrestricted motor driver: use external transistors for the final load current and use the amplifier to control their drive. Select feedback values for the required closed-loop gain, preserve unity-gain stability where required, and include protection against transient overvoltage. Thermal calculations should include both quiescent dissipation and output-stage loss at the highest expected load current.

🌐

Telephony and Communication Interface

OPA551UA supports line-driver, microphone-interface, or communication-signal stages requiring a combination of high supply voltage and stronger output drive than a conventional low-voltage amplifier. The 3 MHz bandwidth covers voice-band and many wider communication signals, while the 15 V/µs slew rate reduces distortion on square or fast transient waveforms. The device's unity-gain stability is useful in buffer and low-noise feedback arrangements. Keep the loop compensation compatible with the closed-loop gain, avoid excessive capacitive loading directly at the output, and isolate sensitive input routing from the high-current output path. Confirm output-voltage headroom, load impedance, and thermal rise across the full communication-bus supply range before production release.

Where can I download the OPA551UA datasheet PDF?
The OPA551UA datasheet PDF is available through the Texas Instruments product page for OPA551 and the linked OPA55x datasheet. The manufacturer document covers the OPA551x family's 60 V supply capability, 200 mA continuous output current, electrical characteristics, pin configuration, and typical application circuits. Use the TI-hosted document as the primary reference for ratings and design limits.
What are the key specifications of OPA551UA that engineers should know?
The OPA551UA is a single operational amplifier with a 60 V maximum supply voltage, 380 mA typical output current, and a 3 MHz gain-bandwidth product in an 8-pin SOIC package. According to the Texas Instruments OPA551 product documentation, it also provides 200 mA continuous output current, 15 V/µs slew rate, 14 nV/√Hz input noise density, and unity-gain stability.
What is the operating voltage range of OPA551UA?
The OPA551UA supports a typical supply operating range of ±4 V to ±30 V, corresponding to an 8 V to 60 V total supply span. The 60 V figure is the device's maximum high-voltage capability. The manufacturer documentation also identifies ±30 V as the upper nominal supply magnitude, so rail-to-rail operation must be assessed separately from the rated supply range.
How much current can the OPA551UA output?
The OPA551UA provides up to 200 mA continuous output current and is described by Texas Instruments as having 380 mA typical output-current capability. These figures describe the amplifier's output stage rather than unrestricted current into every load. Actual continuous operation also depends on output voltage, package dissipation, ambient temperature, copper area, and the load's impedance.
Is OPA551UA suitable for driving high-current loads?
The OPA551UA is suitable for high-current buffer stages because its output stage supports 200 mA continuous current and 380 mA typical capability. According to the TI OPA551 documentation, the amplifier includes output-current limiting and thermal shutdown. Designers should still calculate worst-case power dissipation and verify that the SOIC package and PCB copper can sustain the resulting temperature rise.
OPA551UA vs OPA552UA: which is better for the application?
OPA551UA is generally better when unity-gain operation and lower speed are acceptable, while OPA552UA is better when gain of 5 or greater and faster settling are required. The TI product documentation rates OPA551 at 3 MHz bandwidth and 15 V/µs slew rate, versus 12 MHz and 24 V/µs for OPA552. Both use the 8-pin SOIC format, but the stability requirements differ.
When should I choose OPA551UA over OPA552UA?
Choose OPA551UA when the circuit requires unity-gain stability, works with relatively slow signals, and needs the 200 mA continuous output capability of the OPA551 family. Choose OPA552UA when the amplifier operates at gain of 5 or greater and benefits from its 12 MHz bandwidth and 24 V/µs slew rate. The choice should follow the required gain, bandwidth, load, and thermal conditions.
What is the best drop-in replacement for OPA551UA?
OPA552UA is the closest documented same-package alternative, but it is not a universal functional replacement because the OPA552 is optimized for gains of 5 or greater. It offers 12 MHz bandwidth and 24 V/µs slew rate compared with 3 MHz and 15 V/µs for OPA551. Verify stability, output swing, compensation, and thermal performance before substituting it into an existing board.
Can OPA552UA replace OPA551UA on the same PCB?
OPA552UA can fit the same 8-pin SOIC format as OPA551UA, but it should be treated as a conditional rather than automatic replacement. According to the Texas Instruments product page, OPA552 is optimized for gains of 5 or greater, while OPA551 is unity-gain stable. Existing feedback, noise-gain, compensation, and stability requirements must be checked before conversion.
What is the best cross-brand equivalent for OPA551UA?
No cross-brand equivalent with verified pin compatibility and electrical equivalence has been established for the OPA551UA. A valid replacement must match the 8-pin SOIC pinout, ±4 V to ±30 V supply capability, at least 200 mA continuous output current, roughly 3 MHz bandwidth, 15 V/µs slew rate, and required output swing. Submit the operating requirements through the Request a Quote form for sourcing review.
What can replace OPA551UA?
OPA552UA is a same-package candidate because it is also an 8-pin SOIC high-voltage, high-current operational amplifier. However, its 12 MHz bandwidth and 24 V/µs slew rate are higher than the OPA551UA's 3 MHz and 15 V/µs, and the manufacturer specifies OPA552 for gains of 5 or greater. Confirm that the replacement remains stable with the existing feedback network.
Is OPA551UA the same as OPA552UA?
No. OPA551UA and OPA552UA share the high-voltage, high-current family and 8-pin SOIC format, but they have different stability and speed characteristics. The Texas Instruments documentation identifies OPA551 as unity-gain stable with 3 MHz bandwidth and 15 V/µs slew rate, while OPA552 is optimized for gains of 5 or greater with 12 MHz bandwidth and 24 V/µs slew rate.
Where can I find the OPA551UA pinout?
The OPA551UA pinout is shown in the pin-configuration section of the Texas Instruments OPA55x datasheet, with the 8-pin SOIC numbered according to the package drawing. Use that diagram when assigning the supply, input, output, and no-connect positions because the 8-SOIC outline alone does not communicate the function of each pin. Keep supply and ground routing consistent with the manufacturer drawing.
What design limits matter most for OPA551UA?
The most important limits are supply voltage, input common-mode range, output swing, continuous output current, and package dissipation. The OPA551UA supports high-voltage operation and substantial output current, but its output remains approximately 2 V from the rails. Calculate worst-case internal power dissipation using the actual input voltage, output voltage, and load current, then verify it against ambient temperature and PCB copper.
How should OPA551UA be bypassed and laid out?
Place the input, feedback, and output components close to the OPA551UA, and use local supply bypassing to control high-frequency impedance on the power pins. Because this is a high-current amplifier in an 8-pin SOIC package, preserve useful copper area for heat spreading and avoid long, narrow output-current paths. Follow the decoupling and layout guidance in the manufacturer datasheet.
Is OPA551UA currently active, and what is its lifecycle status?
The OPA551UA is listed as an active Texas Instruments product. The manufacturer product page continues to provide the OPA551 family documentation, ordering information, and quality information. For production planning, request the current lead time and minimum order quantity through the Request a Quote form on this page because inventory and delivery schedules can change.

داتای سەرچاوەی ئەندازیاری بۆ OPA551UA — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose OPA551UA when the circuit needs a high-voltage operational amplifier with strong output drive, unity-gain stability, and moderate bandwidth. It is particularly appropriate for audio buffers, industrial signal-conditioning interfaces, high-voltage feedback stages, and external-transistor drive networks where the required signals remain within the 3 MHz bandwidth and the output current stays within the thermal design limit. OPA552UA is the same-package alternative when gain of 5 or greater is available and the 12 MHz bandwidth and 24 V/µs slew rate provide a useful advantage. Do not select OPA552UA for a unity-gain design without stability analysis. No cross-brand drop-in replacement should be introduced without independent verification of the pinout, supply range, output current, noise, slew rate, output swing, and thermal limits.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە OPA552UA
Brand Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC - same package
Maximum Supply Voltage 60 V 60 V
Continuous Output Current 200 mA 200 mA
Gain-Bandwidth Product 3 MHz 12 MHz
Slew Rate 15 V/µs 24 V/µs
Gain Stability Unity-gain stable Optimized for gains of 5 or greater

جیاکەرەوە سەرەکییەکان

  • Unity-gain operation is supported (بەراورد بەOPA552UA)
  • Lower speed supports a different signal-integrity profile (بەراورد بەOPA552UA)
  • High-current output supports stronger buffer loads (بەراورد بەOPA552UA)

تێبینییەکانی دیزاین

Estimated: calculate dissipation with P = (VIN - VOUT) × IOUT + VIN × IQ, using the maximum supply voltage, actual output voltage, and continuous load current. Add the result to the package's operating-temperature constraint. The 200 mA continuous rating cannot be used without thermal margin because the 8-pin SOIC package has limited heat-spreading area. Keep output current below the continuous rating during steady operation and verify the PCB copper area under worst-case ambient temperature.

Place local bypass capacitors close to the supply pins and connect their return current directly to the device ground. Keep the inverting-input and feedback traces short, particularly when the closed-loop gain is low and the circuit is sensitive to parasitic capacitance. Route the high-current output away from sensitive input nodes and use a ground plane that is not interrupted by output-current returns.

Do not interpret the 380 mA typical output-current figure as an unconditional continuous-load rating. Confirm the 200 mA continuous capability, output-voltage headroom, common-mode input range, and thermal shutdown behavior under the actual load. Output saturation is approximately 2 V from each rail, so a ±30 V supply does not provide a full ±30 V output swing.

Maintain a low-impedance path for both supply rails because high output current can produce supply disturbance that couples back into the signal path. Use separate input and output grounding paths where possible, avoid placing high-current return current beneath sensitive inputs, and verify the design with thermal and stability measurements. If driving a capacitive load, add an isolation resistor and check for stability at the resulting gain.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The available product documentation does not explicitly state the individual RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for OPA551UA.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

opa551ua datasheet OPA551UA datasheet pdf OPA551UA pinout Texas Instruments OPA551UA OPA551UA 60V operational amplifier OPA551UA 200mA output current OPA551UA 3MHz bandwidth OPA551UA 8-SOIC pinout OPA551UA audio buffer application OPA551UA vs OPA552UA OPA551UA replacement OPA551UA equivalent OPA551UA price OPA551UA stock OPA551UA application circuit

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments OPA551UA OPA551 OPA552UA OPA552 OPA593 Operational Amplifier Voltage Amplifier Signal Conditioning High-Voltage Amplifier High-Current Amplifier Power Buffer Unity-Gain Stable Gain-Bandwidth Product Slew Rate Input Noise Density Output Current Common-Mode Input Range Thermal Shutdown Output Current Limiting 8-pin SOIC SOIC Surface Mount SMD RoHS REACH
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ