Texas Instruments

PCM3000E/2K - 18-Bit Stereo Audio Codec | Texas Instruments

MPN: PCM3000E/2K ✓ چالاک
28-SSOP, 0.209 inch (5.30 mm) width Package
MOQ: 1 |

PCM3000E/2K گشتی

The Texas Instruments PCM3000E/2K is an 18-bit stereo audio codec with two analog-to-digital converters, two digital-to-analog converters, a serial audio interface, and single-ended analog input and output in a 28-pin SSOP package. The codec is intended for cost-sensitive consumer audio equipment requiring one-chip stereo capture and playback.

An audio codec is an interface IC that converts analog audio signals into digital data and reconstructs digital audio streams into analog output. In the broader semiconductor hierarchy, PCM3000E/2K belongs to the audio codec family within interface integrated circuits. Combining both conversion directions in one package reduces component count, simplifies board routing, and supports compact consumer audio products such as sound cards, home-audio accessories, and USB audio equipment.

The device provides 18-bit stereo conversion, two ADC channels, two DAC channels, and a serial interface. These features make PCM3000E/2K appropriate for designs that need a straightforward stereo signal path rather than a high-channel-count professional codec. Its single-ended analog architecture also simplifies board design by avoiding the balanced input and output networks commonly required by professional audio interfaces.

Texas Instruments describes PCM3000 and PCM3001 as low-cost, single-chip stereo codecs fabricated using an advanced CMOS process. Both devices are offered in a compact 28-pin SSOP package. The PCM3001 variant can be pin-programmed for different data formats, whereas the PCM3000 family is primarily intended for applications using its supported serial format. The PCM3000E/2K ordering code identifies the tape-and-reel configuration.

Typical uses include USB sound-card signal conditioning, multimedia speaker and headphone interfaces, portable audio accessories, digital recording equipment, and cost-sensitive stereo playback systems. In each case, the device can serve as the central conversion stage between analog transducers and a digital audio controller. Digital audio quality still depends on correct clocking, analog layout, grounding, decoupler placement, and suitable output and input filtering.

PCB design should keep analog input and output traces away from digital clock and serial-data paths, while providing a low-impedance ground plane beneath the codec. Follow the manufacturer datasheet for the recommended power, clock, and signal connections. The most important replacement check is not merely the 28-pin SSOP outline but also the exact signal interface, clocking requirements, analog pin functions, and supported data format.

This page organizes the PCM3000E/2K specifications, lifecycle information, sourcing path, compatible alternatives, comparison points, and practical integration guidance into one engineering-focused reference. It also distinguishes genuine package-and-interface drop-in options from functionally similar codecs that require different pin assignments or redesigned analog and digital circuitry.

جێگرەوەکانی جێگۆڕکێ بۆ PCM3000E/2K — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ PCM3000E/2K (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package.

Texas Instruments
Package: 28-pin SSOP

PCM3000E

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 28-SSOP
Stereo audio codec · 18 bit · 18 bit · 2 stereo channels · 64 times · 8 times · Integrated · Integrated, 8-times oversampling

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PCM3001/2K

✅ جێگرەوەی ڕاستەوخۆ
📦 28-SSOP
Same 18-bit stereo codec architecture and 28-SSOP outline; PCM3001 adds pin-programmable data formats, a 0% change to the headline resolution and channel count

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

PCM3000E

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 28-SSOP
Stereo audio codec · 18 bit · 18 bit · 2 stereo channels · 64 times · 8 times · Integrated · Integrated, 8-times oversampling

پەیوەندی بۆ نرخ

بینینی داتاشیت →

PCM3000E/2K تایبەتمەندییەکان

Device Type Stereo audio codec
Converter Resolution 18 bit
ADC Channels 2 channels
DAC Channels 2 channels
Digital Audio Interface Serial
Analog Input Configuration Single-ended
Analog Output Configuration Single-ended
پاکێج 28-SSOP, 0.209 inch (5.30 mm) width
ژمارەی پین 28 pins
مەودای پلەی گەرمیی کارکردن -25 C to +85 C
Manufacturing Technology CMOS
Packaging Tape & Reel
Product Status Active
Minimum Order Quantity 2000 pieces
Lead Time 18 weeks
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_applicable

ڕێنمایی ڕێکخستنی پینی PCM3000E/2K 28-ssop, 0.209 inch (5.30 mm) width

ڕێکخستنی پین بۆ PCM3000E/2K (پاکێجی 28-ssop, 0.209 inch (5.30 mm) width). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 28-ssop, 0.209 inch (5.30 mm) width بۆ PCM3000E/2K

هیچ داتای وردی پینئاوت بەردەست نییە بۆ PCM3000E/2K.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

PCM3000E/2K گونجاوە بۆ 6 بەکارھێنانs: USB Audio Interface, Digital Speaker Amplifier Front End, Multimedia Recording Accessory, Home Audio Accessory, Portable Audio Player, Consumer Audio Interface Card.

🔊

USB Audio Interface

PCM3000E/2K can provide the analog-to-digital and digital-to-analog conversion stage in a cost-sensitive USB audio interface. Its 18-bit resolution, two ADC channels, and two DAC channels cover basic stereo capture and playback without requiring separate converters. The single-ended analog paths reduce external circuitry, while the 28-SSOP package supports compact layouts. The USB controller must be compatible with the PCM3000 serial format and supply the required master-clock and data signals. Layout should separate analog nets from digital clock traces and use the manufacturer's recommended decoupling and grounding arrangement.

🎧

Digital Speaker Amplifier Front End

PCM3000E/2K is suitable for decoding a digital audio stream into a single-ended analog signal for an external power amplifier. Its two DAC channels support stereo playback, while the 18-bit conversion format suits consumer equipment requiring more precision than an 8-bit or 16-bit system. The codec should be placed close to the amplifier input so that the sensitive analog output is not exposed to long PCB traces. External filtering, gain adjustment, and output impedance must be selected to match the target amplifier input.

🎙️

Multimedia Recording Accessory

PCM3000E/2K can serve as the central stereo codec in a compact multimedia recording accessory that captures microphone or line-level audio and plays back stored digital sound. Two ADC channels support stereo capture, and two DAC channels support stereo monitoring or playback. Its single-ended analog input and output keep the analog network manageable for a cost-focused design. Use the manufacturer pin and typical-application information to establish the required input gain, filtering, clock source, and digital data connection to the recording controller.

🏠

Home Audio Accessory

PCM3000E/2K fits home-audio accessories that need a compact stereo playback path, including digital sources, speaker controllers, and analog input expanders. The device provides 18-bit DAC resolution, two output channels, and a serial digital interface in a 28-SSOP package. Because the outputs are single-ended, the downstream amplifier should provide the required gain and input impedance. The single-chip conversion approach reduces the number of separate ICs compared with separate ADC and DAC packages, but analog filtering and layout quality remain central to avoiding audible distortion.

📱

Portable Audio Player

PCM3000E/2K can be used in a portable stereo audio player where low component count and a compact analog section are important. Two 18-bit DAC channels reproduce left and right digital audio channels, while the serial interface connects to a storage or decoding controller. The 28-SSOP package requires careful footprint layout but avoids the area occupied by separate ADC and DAC packages. Battery-operated designs should evaluate the complete analog power path and the codec's operating requirements under the system's supply conditions before finalizing the architecture.

🖥️

Consumer Audio Interface Card

PCM3000E/2K supports a simple consumer add-in card that bridges analog audio connectors and a digital audio controller. Its two ADC channels accept stereo analog input, and its two DAC channels provide stereo analog output for monitoring or playback. The 18-bit interface offers adequate resolution for cost-sensitive consumer equipment, and the single-ended architecture reduces connector circuitry. Digital isolation, clock distribution, ground partitioning, and connector grounding should be designed together because codec performance can be limited by ground noise even when the converter resolution is adequate.

کورتەی بەرهەمە پێشنیارکراوەکان

PCM3000E Texas Instruments بەکارهێنراوە لە: USB Audio Interface, Digital Speaker Amplifier Front End, Home Audio Accessory, Consumer Audio Interface Card PCM3001/2K Closely related 18-bit stereo codec with selectable data formats بەکارهێنراوە لە: USB Audio Interface, Digital Speaker Amplifier Front End, Home Audio Accessory, Portable Audio Player, Consumer Audio Interface Card PCM3000 Base PCM3000 family option for equivalent conversion functions بەکارهێنراوە لە: Multimedia Recording Accessory, Portable Audio Player PCM3000E/2K Texas Instruments بەکارهێنراوە لە: Multimedia Recording Accessory
What is PCM3000E/2K?
PCM3000E/2K is a Texas Instruments 18-bit stereo audio codec with two ADCs, two DACs, a serial digital interface, and single-ended analog input and output in a 28-pin SSOP package. According to the Texas Instruments PCM3000 family description, it combines a low-cost stereo conversion path in one CMOS interface IC for cost-sensitive consumer audio products.
What are the key specifications of PCM3000E/2K that engineers should know?
PCM3000E/2K provides 18-bit resolution, two stereo ADC channels, two stereo DAC channels, a serial interface, and single-ended analog signal paths in a 28-SSOP package. Texas Instruments identifies PCM3000 and PCM3001 as single-chip stereo codecs using an advanced CMOS process. Its operating temperature range is -25 C to +85 C, according to the product listing.
Where can I download the PCM3000E/2K datasheet PDF?
The official PCM3000E/2K datasheet and product information are available through the Texas Instruments PCM3000 product-details page. The indexed PDF copy is also available through AllDataSheet as a 44-page document with a reported file size of 661 KB. For design control, use the manufacturer document associated with the selected ordering code and revision.
Where can I find the PCM3000E/2K pinout?
The PCM3000E/2K pinout must be taken from the pin-description table in the Texas Instruments PCM3000 family datasheet. The device is a 28-pin SSOP, but its complete numbered pin list is not reproduced here because the available product excerpts do not show every terminal name. Use the manufacturer diagram when assigning PCB nets and checking replacement compatibility.
Is PCM3000E/2K in stock?
PCM3000E/2K is listed as active, and one product listing reported 1,000 units in stock with an 18-week lead time. Stock levels can change without notice. Use the Request a Quote form on this page to request current availability, minimum order quantity, and a lead-time confirmation for the tape-and-reel ordering code.
What is the price of PCM3000E/2K?
PCM3000E/2K pricing is handled through the Request a Quote form on this page because market pricing and available quantity change frequently. The structured pricing data on this product page can be used to review the latest extracted or archived unit-price reference without relying on a static seller listing. Contact the quote desk for a quantity-specific response.
What is the lead time for PCM3000E/2K?
A current product listing reports an 18-week lead time for PCM3000E/2K, with a 2,000-piece minimum order quantity and tape-and-reel packaging. Lead time can vary with order size and market conditions, so use the Request a Quote form on this page for a production schedule. Confirm the shipping option and quantity when placing the order.
Where to buy PCM3000E/2K online?
Use the Request a Quote form on this page to source PCM3000E/2K with the exact PCM3000E/2K ordering code and tape-and-reel packaging. The part is reported as active in a -25 C to +85 C industrial-temperature variant. A quote request can confirm current stock, order multiples, production volume, and delivery expectations.
Can PCM3001 replace PCM3000E/2K?
PCM3001/2K can be considered for a controlled redesign because it is also described as a 28-pin SSOP stereo codec, but it is not a blind substitution. Texas Instruments states that PCM3001 can be pin-programmed for data formats, so the digital interface configuration and board-level clocking must be reviewed. Confirm every pin function and signal timing before approving it as a drop-in replacement.
What is the best drop-in replacement for PCM3000E/2K?
The closest drop-in candidate is the base PCM3000 ordering option because it represents the same PCM3000 codec without the tape-and-reel suffix, provided its package and pinout match the target board. PCM3001/2K may also fit the footprint, but its pin-programmable data-format behavior requires validation. No verified cross-brand replacement was shown to have both the same SSOP-28 pinout and matching interface functions.
When should I choose PCM3000E/2K over PCM3001/2K?
Choose PCM3000E/2K when the system already uses the PCM3000-supported serial format and does not need PCM3001's pin-programmable data formats. Choose PCM3001/2K when the same 28-pin footprint is available and the interface format must be selected through pins. The manufacturer describes both as low-cost CMOS stereo codecs for consumer audio designs.
Is PCM3000E/2K suitable for a USB audio interface?
PCM3000E/2K is suitable for a cost-sensitive stereo USB audio interface when its fixed serial format matches the USB-audio controller and clock architecture. Its 18-bit ADC and DAC channels, single-ended analog paths, and 28-SSOP package support a compact conversion stage. The USB controller must still supply compatible clocks, framing, and data-format signals.
PCM3000E/2K vs PCM3001/2K: which is better for a consumer audio product?
PCM3000E/2K is better when the design can use the PCM3000 data format because it avoids the configuration considerations associated with PCM3001's pin-programmable formats. PCM3001/2K is better when a shared 28-SSOP layout benefits from selectable interface formats. Both provide the same headline 18-bit stereo ADC/DAC architecture and target cost-sensitive consumer applications.
What is the difference between PCM3000E/2K and PCM3000E?
PCM3000E/2K and PCM3000E identify variants of the same Texas Instruments PCM3000E stereo codec family, and both are associated with the 28-SSOP package. The ordering suffix distinguishes the packaging or carrier configuration. Confirm the exact package dimensions, reel orientation, temperature grade, and lead time on the manufacturer product page before substitution.
How should PCM3000E/2K be placed on a PCB?
Place the 28-SSOP with the pin-1 orientation matching the manufacturer drawing, route analog input and output nets away from serial clock and data traces, and maintain a continuous ground reference under the device. Decoupling capacitors should be placed close to their associated supply pins. Use the datasheet reference layout and pin table to implement the final analog and digital partitioning.

داتای سەرچاوەی ئەندازیاری بۆ PCM3000E/2K — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose PCM3000E/2K for a compact, cost-sensitive stereo audio design that already uses the PCM3000 serial format and needs 18-bit ADC and DAC conversion with single-ended I/O. Its 28-SSOP package integrates both conversion directions and suits consumer audio accessories, interface cards, and playback products. Consider PCM3001/2K when the same footprint can be used and the system benefits from pin-programmable data formats, but verify the selected mode and all clock and interface connections. PCM3000 and PCM3000E are closely related ordering options that may assist sourcing or package standardization; confirm their carrier, temperature, reel, and marking details before substitution. No verified cross-brand SSOP-28 part was shown to preserve the complete pin functions, so cross-brand replacement should not be assumed without a new board and performance review.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە PCM3000 PCM3001/2K PCM3000E
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-SSOP 28-SSOP 28-SSOP 28-SSOP
Device Type Stereo audio codec Stereo audio codec Stereo audio codec Stereo audio codec
Converter Resolution 18 bit 18 bit 18 bit 18 bit
ADC Channels 2 channels 2 channels 2 channels 2 channels
DAC Channels 2 channels 2 channels 2 channels 2 channels
Digital Interface Serial Serial Serial with pin-programmable data formats Serial
Analog Configuration Single-ended input and output Single-ended input and output Single-ended input and output Single-ended input and output
Manufacturing Technology CMOS CMOS CMOS CMOS

جیاکەرەوە سەرەکییەکان

  • Single-chip stereo capture and playback (بەراورد بەPCM3001/2K)
  • Same compact SSOP integration level (بەراورد بەPCM3000)
  • Fixed interface for simpler consumer designs (بەراورد بەPCM3001/2K)

تێبینییەکانی دیزاین

Place the codec near the digital audio controller but keep the analog input and output section physically separated from serial clock and data routing. The 28-SSOP footprint should follow the manufacturer land pattern exactly, including pin-1 orientation and lead spacing. A continuous ground reference should pass beneath the device, while analog and digital return paths should avoid sharing narrow traces that carry switching currents.

Connect the analog input and output pins to their filtering networks with short traces, and position external components close to the corresponding codec pins. Digital data and clock lines should not run beneath sensitive analog nodes or between analog ground paths. If the serial clock is fast enough to radiate, constrain it to the digital region and maintain continuous ground shielding on adjacent layers.

Use the supply topology and decoupling arrangement specified in the Texas Instruments PCM3000 family datasheet. The codec combines analog and digital functions, so a shared supply can transfer noise between sections. Provide local bypass capacitance at the supply pins, keep the supply return path low-impedance, and verify startup sequencing and operating voltage against the selected device revision before releasing the design for production.

Do not treat equal SSOP-28 dimensions as proof of drop-in compatibility. Before replacing PCM3000E/2K, compare every pin name, power pin, clock input, serial interface signal, analog input function, and data-format selection. PCM3001/2K adds pin-programmable formats, so an otherwise identical footprint may require different controller settings or board strapping.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The available product excerpts do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the product is listed as a consumer audio codec rather than an automotive-qualified device.

داتا پشتڕاستکراوەتەوە لە: 2026-11-20 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

PCM3000E/2K datasheet PCM3000E/2K pinout PCM3000E/2K datasheet pdf PCM3000E/2K equivalent PCM3000E/2K replacement PCM3000E/2K drop-in replacement PCM3000E/2K price PCM3000E/2K stock Texas Instruments PCM3000E/2K PCM3000E/2K 28-SSOP footprint PCM3000E/2K USB audio interface PCM3000E/2K vs PCM3001/2K

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments PCM3000E/2K PCM3000 PCM3001/2K PCM3000E Stereo audio codec Audio codec Interface IC Analog-to-digital converter Digital-to-analog converter ADC DAC Serial audio interface Single-ended analog input Single-ended analog output 18-bit resolution 28-SSOP SSOP package family Surface mount CMOS process Consumer audio USB audio interface Digital recording Master clock Power supply rejection
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ