TUSB1106RGTR - 12Mbps USB 2.0 Transceiver | Texas Instruments
MPN: TUSB1106RGTR ✓ چالاکTUSB1106RGTR گشتی
A universal serial bus transceiver is an interface IC that bridges a host or peripheral controller with a USB connector. USB transceivers sit between the digital controller and the physical D+ and D- conductors, handling differential signaling, logic thresholds, and bus-direction control. Within the product hierarchy, the TUSB1106 belongs to the universal serial bus controller family and then to the broader interface IC and semiconductor categories.
The TUSB1106 is compliant with the Universal Serial Bus Specification Revision 2.0 and supports both 1.5 Mbit/s low-speed and 12 Mbit/s full-speed data rates. Its single transmit-and-receive arrangement is intended for designs with one USB port rather than devices requiring multiple integrated USB PHY channels. A compact 3 x 3 mm VQFN footprint also supports compact peripheral and accessory designs where board area is constrained.
The exposed thermal pad provides a low-inductance connection between the device and the supply and ground planes when the package is soldered according to the manufacturer land pattern. Because the exposed pad is an electrical connection rather than an isolated pad, the PCB must implement the complete footprint, including thermal-via and copper-thermal-pad features defined in the TUSB1106 documentation.
Typical applications include USB-to-serial adapters, external storage bridges, portable data-collection equipment, industrial control peripherals, and USB connectivity in accessory boards. The TUSB1106 is especially useful when a controller provides only a parallel or multiplexed USB interface and the system requires a dedicated USB 2.0 transceiver with both transmit and receive capability.
Layout is the primary design consideration for this device. Route the differential D+ and D- connections as a controlled-impedance pair, minimize stub branches, and place the required decoupling capacitors close to their designated pins. Confirm the pin arrangement, exposed-pad connection, and capacitor placement directly against the TUSB1106 datasheet before releasing the PCB artwork.
This page consolidates the verified USB 2.0 data rates, package information, application context, and drop-in comparison options with practical PCB guidance. It is intended to accelerate component selection while keeping unsupported electrical details out of the published specification set.
جێگرەوەکانی جێگۆڕکێ بۆ TUSB1106RGTR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
TUSB1106RGTRG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
TUSB1105RGTRG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
TUSB1106RGTR تایبەتمەندییەکان
| Product Type | Single-channel USB 2.0 transceiver |
| Transceiver Configuration | 1 transmit / 1 receive |
| USB Specification | Universal Serial Bus Specification Revision 2.0 |
| Low-Speed Data Rate | 1.5 Mbit/s |
| Full-Speed Data Rate | 12 Mbit/s |
| High-Speed Data Rate | Not supported |
| ڤۆڵتیەی دابینکردن | 3 V |
| پاکێج | 16-pin VQFN (RGT), 3 x 3 mm |
| Thermal Pad | Exposed pad |
| جۆری دامەزراندن | Surface mount |
| Signal Interface | Differential D+ and D- |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
ڕێنمایی ڕێکخستنی پینی TUSB1106RGTR 16-pin vqfn (rgt), 3 x 3 mm
ڕێکخستنی پین بۆ TUSB1106RGTR (پاکێجی 16-pin vqfn (rgt), 3 x 3 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ TUSB1106RGTR.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
TUSB1106RGTR گونجاوە بۆ 6 بەکارھێنانs: USB-to-Serial Adapter, Industrial Data-Collection Terminal, External Storage Bridge, USB Accessory and Dongle, USB Peripheral Connectivity, USB-to-Peripheral Control Interface.
USB-to-Serial Adapter
The TUSB1106RGTR suits compact USB-to-serial adapters that require full-speed 12 Mbit/s communication and a dedicated differential USB transmit-and-receive path. Place the transceiver between the connector and the system controller, then route D+ and D- as a controlled-impedance differential pair. Its 16-pin 3 x 3 mm VQFN package leaves board area for the connector and protection components, while the 1.5 Mbit/s low-speed capability covers control-only USB links. Confirm the controller's supported USB operating mode and the transceiver's control-signal state during reset before finalizing the layout.
پێشنیارکراو
Industrial Data-Collection Terminal
The TUSB1106RGTR is a practical interface for industrial data-collection equipment that connects a control board to a USB host. Its 12 Mbit/s full-speed rate is appropriate for command traffic, configuration downloads, and status updates, while 3 V operation aligns with many embedded processors. Use a differential USB layout with a continuous ground reference and place input bypass capacitors near the transceiver. The exposed pad should follow the manufacturer land pattern so that thermal and return-current paths remain low-inductance under industrial temperature and vibration requirements.
پێشنیارکراو
External Storage Bridge
The TUSB1106RGTR can provide the USB-side physical interface in an external storage bridge that operates at full speed. The single transmit-and-receive channel matches bridges with one USB port, and the 16-pin VQFN footprint supports compact enclosures. Keep the USB differential pair away from high-current switching nodes, terminate it according to the USB implementation guidance, and use solid ground-plane continuity beneath the pair. Because the device does not support 480 Mbit/s high-speed mode, it is appropriate only when the storage controller and target transfer workload are designed for full-speed operation.
پێشنیارکراو
USB Accessory and Dongle
Compact accessory and dongle designs benefit from the TUSB1106RGTR's 3 x 3 mm VQFN footprint and single-link architecture. It can carry full-speed 12 Mbit/s command or data traffic between a USB host and an embedded peripheral controller. The small package still requires careful exposed-pad soldering and thermal-via implementation, so verify the assembly process before layout release. Route the differential pair directly from the connector region toward the transceiver, and place ESD protection where the cable-attached signals enter the board.
پێشنیارکراو
USB Peripheral Connectivity
The TUSB1106RGTR is suitable for a USB peripheral port operating in low-speed or full-speed mode, including configuration ports and service interfaces. Its 1.5 Mbit/s low-speed capability allows low-bandwidth control functions, while the 12 Mbit/s full-speed mode supports bulk data transfer. Design the signal path so that the D+ and D- pair has matched geometry and an uninterrupted ground reference, and place bypass capacitance at the supply pins. Validate suspend, reset, and bus-idle behavior against the system controller during hardware bring-up.
پێشنیارکراو
USB-to-Peripheral Control Interface
The TUSB1106RGTR can serve as the USB physical layer between a peripheral controller and an external host in service equipment or control modules. Full-speed operation at 12 Mbit/s provides adequate bandwidth for command exchange, while the single transmit-and-receive arrangement avoids unnecessary PHY channels. The device's 3 V supply and compact VQFN package simplify integration with embedded controllers, but the exposed-pad net and all USB nets must be checked against the manufacturer pin table. Add appropriate cable-side protection and maintain a short, controlled USB signal path.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ TUSB1106RGTR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | TUSB1106RGTRG4 | TUSB1105RGTRG4 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-pin VQFN (RGT), 3 x 3 mm | 16-pin VQFN, 3 x 3 mm | 16-pin VQFN |
| Mounting Type | Surface mount | Surface mount | Surface mount |
جیاکەرەوە سەرەکییەکان
- Exact same-device ordering alternative (بەراورد بەTUSB1106RGTRG4)
- Single-channel interface for compact USB ports (بەراورد بەTUSB1105RGTRG4)
- Compact exposed-pad footprint (بەراورد بەTUSB1106RGTRG4)
تێبینییەکانی دیزاین
Route D+ and D- as a controlled-impedance differential pair with matched spacing, minimal length matching, and no unnecessary stubs. Keep the pair over a continuous ground plane and away from switching-power nodes and high-speed digital edges. Place the transceiver close to the USB connector's protection components so that the externally exposed signal path remains short.
Implement the complete 16-pin VQFN (RGT) land pattern, including the exposed pad and its thermal-via array. The exposed pad is an electrical net and must be connected as specified in the manufacturer footprint rather than treated as a mechanical feature. Verify pad dimensions, solder-mask openings, and paste patterns against the current package drawing before fabrication.
Do not select this device for a design requiring 480 Mbit/s USB high-speed operation; the verified rates are 1.5 Mbit/s low speed and 12 Mbit/s full speed. Also verify that the selected same-family ordering code provides the required bus-role and direction-control behavior. Package similarity alone does not establish that every control function is interchangeable.
Use a continuous ground reference beneath the USB pair and connect the exposed pad with low-impedance vias into the ground or supply structure specified by the datasheet. Keep the decoupling network close to the supply pins and separate the USB pair from switching-regulator power loops. These measures reduce radiated emissions and susceptibility to ground-current coupling on a cable-connected interface.
زانیاری پابەندبوون
The verified pages identify the family and package but do not provide a complete compliance statement for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with the manufacturer before release.