Texas Instruments

TUSB1106RGTR - 12Mbps USB 2.0 Transceiver | Texas Instruments

MPN: TUSB1106RGTR ✓ 啟用中
3 V Vdss 16-pin VQFN (RGT), 3 x 3 mm Package 1.5 Mbit/s Speed
MOQ: 1 |

TUSB1106RGTR 概覽

The Texas Instruments TUSB1106RGTR is a single-channel USB 2.0 transceiver supporting low-speed 1.5 Mbit/s and full-speed 12 Mbit/s operation, packaged in a 16-pin VQFN (RGT) module with an exposed pad. The device provides transmit and receive paths for one USB link and operates from a 3 V supply according to comparison data published for this family.

A universal serial bus transceiver is an interface IC that bridges a host or peripheral controller with a USB connector. USB transceivers sit between the digital controller and the physical D+ and D- conductors, handling differential signaling, logic thresholds, and bus-direction control. Within the product hierarchy, the TUSB1106 belongs to the universal serial bus controller family and then to the broader interface IC and semiconductor categories.

The TUSB1106 is compliant with the Universal Serial Bus Specification Revision 2.0 and supports both 1.5 Mbit/s low-speed and 12 Mbit/s full-speed data rates. Its single transmit-and-receive arrangement is intended for designs with one USB port rather than devices requiring multiple integrated USB PHY channels. A compact 3 x 3 mm VQFN footprint also supports compact peripheral and accessory designs where board area is constrained.

The exposed thermal pad provides a low-inductance connection between the device and the supply and ground planes when the package is soldered according to the manufacturer land pattern. Because the exposed pad is an electrical connection rather than an isolated pad, the PCB must implement the complete footprint, including thermal-via and copper-thermal-pad features defined in the TUSB1106 documentation.

Typical applications include USB-to-serial adapters, external storage bridges, portable data-collection equipment, industrial control peripherals, and USB connectivity in accessory boards. The TUSB1106 is especially useful when a controller provides only a parallel or multiplexed USB interface and the system requires a dedicated USB 2.0 transceiver with both transmit and receive capability.

Layout is the primary design consideration for this device. Route the differential D+ and D- connections as a controlled-impedance pair, minimize stub branches, and place the required decoupling capacitors close to their designated pins. Confirm the pin arrangement, exposed-pad connection, and capacitor placement directly against the TUSB1106 datasheet before releasing the PCB artwork.

This page consolidates the verified USB 2.0 data rates, package information, application context, and drop-in comparison options with practical PCB guidance. It is intended to accelerate component selection while keeping unsupported electrical details out of the published specification set.

直接替換替代品,適用於 TUSB1106RGTR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

TUSB1106RGTRG4

✅ 直接替換
📦 16-pin VQFN (RGT)
Same USB 2.0 low-speed 1.5 Mbit/s and full-speed 12 Mbit/s transceiver function; G4 ordering-code difference in compliance designation

📋 參考替代品(不在目錄中)

TUSB1105RGTRG4

✅ 直接替換
📦 16-pin VQFN (RGT)
Same-family USB transceiver in a 16-pin VQFN package, but direction-control or bus-role behavior differs from TUSB1106

📋 參考替代品(不在目錄中)

TUSB1106RGTR 規格

Product Type Single-channel USB 2.0 transceiver
Transceiver Configuration 1 transmit / 1 receive
USB Specification Universal Serial Bus Specification Revision 2.0
Low-Speed Data Rate 1.5 Mbit/s
Full-Speed Data Rate 12 Mbit/s
High-Speed Data Rate Not supported
供應電壓 3 V
封裝 16-pin VQFN (RGT), 3 x 3 mm
Thermal Pad Exposed pad
安裝類型 Surface mount
Signal Interface Differential D+ and D-
RoHS 狀態 unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

TUSB1106RGTR 16-pin vqfn (rgt), 3 x 3 mm 腳位配置指南

TUSB1106RGTR(16-pin vqfn (rgt), 3 x 3 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

TUSB1106RGTR 的 16-pin vqfn (rgt), 3 x 3 mm 封裝腳位圖

無詳細腳位定義資料: TUSB1106RGTR.

請參閱 資料表 以查看完整腳位配置。

典型應用

TUSB1106RGTR 適用於 6 應用s: USB-to-Serial Adapter, Industrial Data-Collection Terminal, External Storage Bridge, USB Accessory and Dongle, USB Peripheral Connectivity, USB-to-Peripheral Control Interface.

🔌

USB-to-Serial Adapter

The TUSB1106RGTR suits compact USB-to-serial adapters that require full-speed 12 Mbit/s communication and a dedicated differential USB transmit-and-receive path. Place the transceiver between the connector and the system controller, then route D+ and D- as a controlled-impedance differential pair. Its 16-pin 3 x 3 mm VQFN package leaves board area for the connector and protection components, while the 1.5 Mbit/s low-speed capability covers control-only USB links. Confirm the controller's supported USB operating mode and the transceiver's control-signal state during reset before finalizing the layout.

🏭

Industrial Data-Collection Terminal

The TUSB1106RGTR is a practical interface for industrial data-collection equipment that connects a control board to a USB host. Its 12 Mbit/s full-speed rate is appropriate for command traffic, configuration downloads, and status updates, while 3 V operation aligns with many embedded processors. Use a differential USB layout with a continuous ground reference and place input bypass capacitors near the transceiver. The exposed pad should follow the manufacturer land pattern so that thermal and return-current paths remain low-inductance under industrial temperature and vibration requirements.

💾

External Storage Bridge

The TUSB1106RGTR can provide the USB-side physical interface in an external storage bridge that operates at full speed. The single transmit-and-receive channel matches bridges with one USB port, and the 16-pin VQFN footprint supports compact enclosures. Keep the USB differential pair away from high-current switching nodes, terminate it according to the USB implementation guidance, and use solid ground-plane continuity beneath the pair. Because the device does not support 480 Mbit/s high-speed mode, it is appropriate only when the storage controller and target transfer workload are designed for full-speed operation.

🧩

USB Accessory and Dongle

Compact accessory and dongle designs benefit from the TUSB1106RGTR's 3 x 3 mm VQFN footprint and single-link architecture. It can carry full-speed 12 Mbit/s command or data traffic between a USB host and an embedded peripheral controller. The small package still requires careful exposed-pad soldering and thermal-via implementation, so verify the assembly process before layout release. Route the differential pair directly from the connector region toward the transceiver, and place ESD protection where the cable-attached signals enter the board.

🖥️

USB Peripheral Connectivity

The TUSB1106RGTR is suitable for a USB peripheral port operating in low-speed or full-speed mode, including configuration ports and service interfaces. Its 1.5 Mbit/s low-speed capability allows low-bandwidth control functions, while the 12 Mbit/s full-speed mode supports bulk data transfer. Design the signal path so that the D+ and D- pair has matched geometry and an uninterrupted ground reference, and place bypass capacitance at the supply pins. Validate suspend, reset, and bus-idle behavior against the system controller during hardware bring-up.

🔧

USB-to-Peripheral Control Interface

The TUSB1106RGTR can serve as the USB physical layer between a peripheral controller and an external host in service equipment or control modules. Full-speed operation at 12 Mbit/s provides adequate bandwidth for command exchange, while the single transmit-and-receive arrangement avoids unnecessary PHY channels. The device's 3 V supply and compact VQFN package simplify integration with embedded controllers, but the exposed-pad net and all USB nets must be checked against the manufacturer pin table. Add appropriate cable-side protection and maintain a short, controlled USB signal path.

推薦產品摘要

TUSB1105RGTRG4 Same-family USB transceiver 用於: USB-to-Serial Adapter, Industrial Data-Collection Terminal, USB Accessory and Dongle, USB-to-Peripheral Control Interface TUSB1106RGTRG4 Same-device ordering variant 用於: USB-to-Serial Adapter, USB Accessory and Dongle, USB Peripheral Connectivity TUSB2551RGTR Alternate USB transceiver family for evaluation 用於: Industrial Data-Collection Terminal, External Storage Bridge, USB Peripheral Connectivity TUSB2551ARGTR Alternative USB transceiver family member 用於: External Storage Bridge, USB-to-Peripheral Control Interface
What is the operating voltage of the TUSB1106RGTR?
The TUSB1106RGTR operates from a 3 V supply. Texas Instruments describes the TUSB1105 and TUSB1106 as USB 2.0 transceivers for low-speed 1.5 Mbit/s and full-speed 12 Mbit/s links. The 3 V operating point makes the device suitable for compact USB peripheral and accessory designs whose surrounding controller operates from a 3.3 V rail.
What data rates does the TUSB1106RGTR support?
The TUSB1106RGTR supports low-speed operation at 1.5 Mbit/s and full-speed operation at 12 Mbit/s. According to the Texas Instruments TUSB1106 product page, the device is compliant with Universal Serial Bus Specification Revision 2.0. It does not target the 480 Mbit/s high-speed mode used by USB 2.0 high-speed controller implementations.
Where can I download the TUSB1106RGTR datasheet PDF?
The authoritative document is available from the Texas Instruments TUSB1106 product page, which links the device data sheet and supporting technical information. Open the TUSB1106 product page, select the TUSB1106RGTR part-details entry, and follow the data-sheet link. Use that document for the complete pin list, exposed-pad layout, electrical characteristics, and recommended application circuit.
Where can I find the TUSB1106RGTR pinout and VQFN footprint?
The TUSB1106RGTR uses a 16-pin VQFN (RGT) package measuring 3 x 3 mm. Its footprint includes an exposed pad, so the PCB land pattern must match the complete package drawing rather than a generic 16-pin QFN outline. Assign D+, D-, supply, ground, and control nets using the pin-description table in the manufacturer datasheet before routing the board.
Where can I buy TUSB1106RGTR online?
Use the Request a Quote form on this page to request the TUSB1106RGTR and confirm current availability, order quantity, and lead time. The form also allows you to specify the required package quantity and delivery requirements before placing an order, which is useful when validating a new design around a 16-pin VQFN footprint.
What is the lead time for TUSB1106RGTR?
Request the current lead time through the Request a Quote form on this page so the answer reflects current inventory and factory scheduling. Schedule-sensitive programs should also request a buffer for the 16-pin VQFN assembly. Because component lead times can change by region and purchasing volume, a quotation response is more reliable than a general market estimate.
Is TUSB1106RGTR in stock?
Current stock status should be confirmed through the Request a Quote form on this page. The form provides a direct route for checking available quantity and expected shipment timing for the exact TUSB1106RGTR ordering code. Confirm that the quoted line refers to the 16-pin VQFN (RGT) package before committing the component to a new PCB revision.
How does the TUSB1106RGTR compare with the TUSB1105RGTR?
The TUSB1106RGTR and TUSB1105RGTR belong to the same Texas Instruments USB transceiver family and use the same 16-pin VQFN class of package. Their functional roles should still be checked against the family datasheet and the required host, peripheral, or bus-sensing application. The TUSB1106 is the device identified here as compliant with USB 2.0 low- and full-speed operation.
What is the difference between TUSB1106RGTR and TUSB1106RGTRG4?
TUSB1106RGTRG4 is identified in comparison data as the same Texas Instruments USB transceiver family member in a 16-pin VQFN configuration. The G4 suffix represents an ordering or compliance designation rather than a different USB data rate. Review the manufacturer part-details page for the exact ordering-code status, temperature range, and packaging information before treating one code as interchangeable with the other.
What can replace the TUSB1106RGTR?
The closest documented replacement is the TUSB1106RGTRG4, which appears in comparison data for the same USB 2.0 transceiver family and 16-pin VQFN package. Another same-family option is the TUSB1105RGTRG4, but its direction-control and bus-role behavior must be confirmed before substitution. No cross-brand part is presented as drop-in because pin-level and electrical equivalence could not be established.
Is the TUSB1106RGTR a drop-in replacement for USB1T11AM?
The TUSB1106RGTR should not be treated as a drop-in replacement for USB1T11AM without a complete footprint and pin-function comparison. Comparison pages associate the two devices functionally, but functional equivalence does not by itself prove identical pinout, exposed-pad connections, control logic, and electrical limits. Check the manufacturer drawings for both packages and verify every connected net before substituting.
When should I choose the TUSB1106RGTR over another USB transceiver?
Choose the TUSB1106RGTR when the design needs one USB 2.0 low- or full-speed link, a dedicated transmit and receive path, and a compact 16-pin VQFN implementation. Select a different device when the system requires high-speed 480 Mbit/s operation, multiple PHY channels, a different bus role, or a package that matches an existing board without relocation.
Is the TUSB1106RGTR suitable for USB peripheral accessories?
The TUSB1106RGTR is suitable for compact USB peripheral accessories that operate at low-speed 1.5 Mbit/s or full-speed 12 Mbit/s. Its single transmit-and-receive architecture supports one USB link, while the 3 x 3 mm 16-pin VQFN package helps reduce board area. The surrounding controller, connector, protection scheme, and required USB device class must also be supported.
What are the key specifications engineers should know about TUSB1106RGTR?
The key TUSB1106RGTR specifications are single-channel transmit and receive operation, USB Specification Revision 2.0 compliance, 1.5 Mbit/s low-speed support, 12 Mbit/s full-speed support, a 3 V supply, and a 16-pin 3 x 3 mm VQFN package with an exposed pad. These specifications position it for compact USB 2.0 links below high-speed operation.
Does the TUSB1106RGTR support USB high-speed mode?
No. The TUSB1106RGTR supports USB low-speed operation at 1.5 Mbit/s and full-speed operation at 12 Mbit/s, not the 480 Mbit/s high-speed mode. A design that requires USB 2.0 high-speed performance should use a transceiver specified for that rate and verify that its host or peripheral controller also supports the matching operating mode.
What PCB layout practices are important for the TUSB1106RGTR?
Route D+ and D- as a matched differential pair with continuous reference-plane support, avoid long stubs, and place the required capacitors close to their pins. The exposed pad must be connected exactly as shown in the manufacturer footprint and thermal-via pattern. Confirm whether the pad is tied to ground or another supply in the datasheet before fabrication.

工程參考資料,適用於 TUSB1106RGTR — 比較、設計指引及合規資訊。

選型指南

Choose the TUSB1106RGTR for a compact design with one USB 2.0 link operating at 1.5 Mbit/s or 12 Mbit/s. Its single transmit-and-receive path, 3 V supply, and 16-pin 3 x 3 mm VQFN package are well suited to peripheral accessories, adapters, and industrial data-collection equipment. Consider TUSB1106RGTRG4 when its ordering and qualification details meet the program requirements but a second sourcing channel is needed for the same device family. Evaluate TUSB1105RGTRG4 only after confirming that its direction-control and bus-role behavior matches the intended application. A USB transceiver with a different PHY count, high-speed capability, or package should be selected instead when the design requirements exceed the TUSB1106RGTR feature set or when PCB reuse is impossible.

與替代品比較

參數 本產品 TUSB1106RGTRG4 TUSB1105RGTRG4
Brand Texas Instruments Texas Instruments Texas Instruments
Package 16-pin VQFN (RGT), 3 x 3 mm 16-pin VQFN, 3 x 3 mm 16-pin VQFN
Mounting Type Surface mount Surface mount Surface mount

主要差異化特點

  • Exact same-device ordering alternative (對比TUSB1106RGTRG4)
  • Single-channel interface for compact USB ports (對比TUSB1105RGTRG4)
  • Compact exposed-pad footprint (對比TUSB1106RGTRG4)

設計說明

Route D+ and D- as a controlled-impedance differential pair with matched spacing, minimal length matching, and no unnecessary stubs. Keep the pair over a continuous ground plane and away from switching-power nodes and high-speed digital edges. Place the transceiver close to the USB connector's protection components so that the externally exposed signal path remains short.

Implement the complete 16-pin VQFN (RGT) land pattern, including the exposed pad and its thermal-via array. The exposed pad is an electrical net and must be connected as specified in the manufacturer footprint rather than treated as a mechanical feature. Verify pad dimensions, solder-mask openings, and paste patterns against the current package drawing before fabrication.

Do not select this device for a design requiring 480 Mbit/s USB high-speed operation; the verified rates are 1.5 Mbit/s low speed and 12 Mbit/s full speed. Also verify that the selected same-family ordering code provides the required bus-role and direction-control behavior. Package similarity alone does not establish that every control function is interchangeable.

Use a continuous ground reference beneath the USB pair and connect the exposed pad with low-impedance vias into the ground or supply structure specified by the datasheet. Keep the decoupling network close to the supply pins and separate the USB pair from switching-regulator power loops. These measures reduce radiated emissions and susceptibility to ground-current coupling on a cable-connected interface.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The verified pages identify the family and package but do not provide a complete compliance statement for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with the manufacturer before release.

相關搜尋

TUSB1106RGTR datasheet TUSB1106RGTR pinout TUSB1106RGTR datasheet pdf TUSB1106RGTR equivalent TUSB1106RGTR replacement TUSB1106RGTR drop-in replacement TUSB1106RGTR vs TUSB1105RGTRG4 TUSB1106 VQFN-16 footprint TUSB1106 12Mbps USB transceiver Texas Instruments TUSB1106RGTR TUSB1106RGTR USB adapter application TUSB1106RGTR price TUSB1106RGTR stock TUSB1106RGTR schematic

相關元件與詞彙

Texas Instruments TUSB1106RGTR TUSB1106RGTRG4 TUSB1105RGTRG4 TUSB2551RGTR TUSB2551ARGTR USB transceiver Universal Serial Bus USB 2.0 USB Specification Revision 2.0 low-speed USB full-speed USB 1.5 Mbit/s 12 Mbit/s D+ and D- differential signaling VQFN-16 exposed thermal pad surface-mount package 3 x 3 mm footprint interface IC semiconductor USB-to-serial adapter industrial data collection external storage bridge
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情