XC7K160T-1FF676I - 162,240-Cell Kintex-7 FPGA | AMD
MPN: XC7K160T-1FF676I ✓ چالاکXC7K160T-1FF676I گشتی
A Kintex-7 FPGA is a reprogrammable semiconductor containing configurable logic blocks, programmable I/O, block RAM, DSP slices, clock-management resources and high-speed transceivers. Within the FPGA hierarchy, the XC7K160T occupies the middle of AMD's Kintex-7 range: it provides substantially more parallel processing capacity than entry-level Artix-7 devices while supporting high-speed serial connectivity and clocking functions.
Key characteristics include 162,240 logic cells, approximately 250 user I/Os and 1,2675 CLBs as identified in the device listings. The -1 performance grade targets cost-sensitive applications that do not require the highest -2 or -3 speed grades. The -2 and -3 grades offer additional timing margin, while the -1 grade is appropriate when system timing closes with moderate design margins.
The device combines programmable digital logic with DSP48 resources and dedicated memory blocks for filtering, modulation, waveform generation, packet processing and accelerator functions. AMD documentation identifies the Kintex-7 family as optimized for price-performance, with the 676-ball package supporting dense board-level integration where high pin count and robust interconnect access are important.
Typical uses include telecommunications line cards, industrial networking, radar and signal-processing subsystems, high-speed data acquisition, video infrastructure, test equipment and aerospace-grade embedded processing. Industrial temperature screening makes the -1FF676I option relevant to equipment expected to operate in extended commercial environments.
For a new PCB, use the manufacturer's package pinout, escape-routing guidance and power-supply recommendations rather than inferring connections from board-to-board-migration examples. The 676-ball package requires careful ball-grid-array escape routing, and the device's numerous high-speed I/Os make return paths, reference planes and via transitions important to signal integrity.
This page consolidates the verified device identity, package and resource data, drop-in-compatible Kintex-7 options, engineering selection criteria and practical design notes into a single engineering reference. It also distinguishes exact package and speed-grade substitutions from parts that require a different PCB land pattern.
جێگرەوەکانی جێگۆڕکێ بۆ XC7K160T-1FF676I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC7K160T-1FF676I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Block RAM, Device Type, Logic Cells, Speed Grade.
XC7K160T-1FFG676I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7K160T-2FFG676I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7K160T-2FF676I
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7K160T-2FBG676C
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →XC7K160T-1FF676I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Product Type | Kintex-7 Field-Programmable Gate Array (FPGA) |
| Logic Cells | 162,240 cells |
| Configurable Logic Blocks | 12,675 CLBs |
| Process Technology | 28 nm CMOS |
| User I/O Count | 250 I/Os |
| زۆرترین فرێکوێنسیی کاتژمێر | 1098 MHz |
| Core Supply Voltage | 1 V |
| Performance Grade | -1 |
| Temperature Grade | Industrial |
| پاکێج | 676-ball FCBGA, 29 mm x 29 mm |
| Package Designation | FF676 |
| جۆری دامەزراندن | Surface Mount |
| FPGA Programmable Resources | Logic, block RAM, DSP48 slices, programmable I/O and dedicated clocking resources |
ڕێنمایی ڕێکخستنی پینی XC7K160T-1FF676I ff676
ڕێکخستنی پین بۆ XC7K160T-1FF676I (پاکێجی ff676). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC7K160T-1FF676I.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
XC7K160T-1FF676I گونجاوە بۆ 6 بەکارھێنانs: Telecommunications Line-Card Interface Logic, Industrial Signal and DSP Processing, High-Speed Data Acquisition Systems, Radar and High-Performance Processing, Programmable Networking and Protocol Bridging, Video Infrastructure and Image Processing.
Telecommunications Line-Card Interface Logic
The XC7K160T-1FF676I fits telecommunications line cards that require extensive parallel bus logic, clocking and programmable interface handling. Its 162,240 logic cells provide capacity for multiple datapaths, while 250 user I/Os provide direct connections to transceivers, backplanes and control devices. The -1 performance grade suits designs that meet timing at moderate cost rather than maximum speed. Validate each interface timing path against the selected I/O standard and confirm configuration, reference-clock and power sequencing with the manufacturer guidance.
پێشنیارکراو
Industrial Signal and DSP Processing
The XC7K160T-1FF676I is appropriate for industrial filtering, modulation, waveform generation and real-time analysis systems that combine parallel logic with programmable DSP. The 162,240-cell Kintex-7 architecture allows multiple data channels to be processed concurrently, and the 250 I/Os simplify interfacing to converters, memory and sampling clocks. Use the AMD design tools to map the intended DSP operations and confirm maximum clock performance using actual pipelining, because the -1 grade provides less timing headroom than the -2 grade.
پێشنیارکراو
High-Speed Data Acquisition Systems
The XC7K160T-1FF676I can support parallel data-acquisition systems requiring many channels, wide data words and deterministic programmable logic. Its 250 user I/Os allow direct connection to high-rate converters, capture memories and timing references, while 162,240 logic cells support channel alignment, filtering, buffering and protocol handling. Place input and output interfaces according to the package-specific ball map, preserve reference-plane continuity, and account for input-buffer and clock skew in the timing budget rather than relying only on logic-cell count.
پێشنیارکراو
Radar and High-Performance Processing
The XC7K160T-1FF676I suits radar, electronic-warfare and beam-processing subsystems that implement parallel algorithms in programmable logic and DSP blocks. The Kintex-7 resource level supports concurrent data paths, while the 250 I/Os provide access to high-throughput converters and interconnect devices. The -1 grade is appropriate where system timing is achievable with controlled complexity; move to a -2 option when pipeline constraints require additional margin. Power estimation must reflect the selected DSP and I/O utilization rather than an average resource assumption.
پێشنیارکراو
Programmable Networking and Protocol Bridging
The XC7K160T-1FF676I can implement protocol conversion, packet processing, traffic shaping and multi-port interface logic in industrial networking equipment. Its large programmable logic capacity allows several bridge functions to coexist, and 250 I/Os support connections to PHYs, backplanes and management controllers. The -1 grade works well for cost-sensitive designs whose clocks and buses close at moderate performance. Keep configuration pins accessible for recovery programming, and follow the manufacturer startup and power-sequence requirements to avoid configuration failures.
پێشنیارکراو
Video Infrastructure and Image Processing
The XC7K160T-1FF676I is applicable to video processing, scaling, frame-buffer control and multi-channel image pipelines because the Kintex-7 device combines substantial parallel logic with programmable DSP and memory resources. The 250 user I/Os are useful for connecting parallel pixel buses, serializers and control logic. The -1 performance grade favors cost-efficient implementations that meet their pixel-rate requirements without the highest clock rate. Timing should be evaluated for the specific pixel clock, data-bus skew and memory-interface timing rather than only the theoretical maximum device clock.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ XC7K160T-1FF676I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | XC7K160T-1FFG676I | XC7K160T-2FBG676I | XC7K160T-2FFG676I | XC7K160T-2FF676I | XC7K160T-2FBG676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-ball FCBGA (FF676) | 676-ball FCBGA (FFG676) | 676-ball FCBGA (FBG676) | 676-ball FCBGA (FFG676) | 676-ball FCBGA (FF676) | 676-ball FCBGA (FBG676) |
| Logic Cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells | 162,240 cells |
| Performance Grade | -1 | -1 | -2 | -2 | -2 | -2 |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial | Industrial | Commercial |
جیاکەرەوە سەرەکییەکان
- Cost-optimized -1 performance grade with full 162,240-cell Kintex-7 density (بەراورد بەXC7K160T-2FBG676I)
- Industrial-temperature order code for extended commercial environments (بەراورد بەXC7K160T-2FBG676C)
- High user-I/O density for parallel interface-rich systems (بەراورد بەXC7K160T-1FFG676I)
- Mid-range Kintex-7 balance of programmable logic and DSP capacity (بەراورد بەXC7K160T-2FFG676I)
تێبینییەکانی دیزاین
Treat the 676-ball FCBGA as a full escape-routing problem. Follow the manufacturer package drawing for ball assignments, recommended via-in-pad structures, power-plane geometry and thermal-via placement. Keep the Xilinx configuration interface accessible for multi-boot or recovery programming, and avoid placing sensitive high-speed routes beneath areas with aggressive via transitions. PCB stack-up and return-path continuity should be validated against the selected I/O standards before fabrication.
Create the power tree from the device rails and sequencing requirements rather than assuming that a 1 V core rail can be derived directly from a general-purpose supply. Decouple each rail at the device with the capacitance and placement specified by the manufacturer. Validate the design with the AMD power estimator using actual logic, RAM, DSP and I/O utilization because static and dynamic power can differ substantially between a lightly loaded design and a fully active processing pipeline.
Estimate junction temperature before adding a heatsink, but do not omit thermal copper and vias from the first PCB revision. The 676-ball package provides a thermal exit path, yet its effectiveness depends on layer count, via arrays, copper distribution and airflow. Recalculate the thermal result for the worst-case programmed activity, ambient temperature and board enclosure. Use the package thermal model and measure the finished assembly because airflow and neighboring heat sources can change the operating margin.
Preserve continuous reference planes under high-speed I/O and avoid layer transitions or splits that interrupt return currents. Match external clock, memory and transceiver interface lengths according to the selected interface standard, and include receiver skew and package-flight-time effects in the board-level timing budget. For systems migrating between speed grades, do not assume that a faster grade relaxes the physical layout; retest eye diagrams, skew and channel-loss margin after every PCB change.
The most common migration error is selecting an MPN with the same family name but a different package, speed grade or temperature suffix. Compare the complete ordering information, especially the ball package and industrial-temperature designation, before releasing a purchase. A -2 device may provide more timing margin, but it does not replace the need to confirm pinout, power rails and commercial terms. Perform a post-fit timing update and configuration test on every revised board.
زانیاری پابەندبوون
Compliance attributes were not explicitly stated in the manufacturer and distributor information for this exact order code. Verify lead-free, RoHS, REACH and automotive qualification status against the exact AMD ordering information before production release.