AMD

XC7K160T-2FF676I - 162K Kintex-7 FPGA | AMD Xilinx

MPN: XC7K160T-2FF676I ✓ چالاک
970 mV to 1.03 V Vdss 676-ball FCBGA Package 710 MHz Speed
MOQ: 1 |

XC7K160T-2FF676I گشتی

AMD Xilinx XC7K160T-2FF676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 250 user I/Os, a maximum clock frequency of 710 MHz, and a 676-ball FCBGA package. The -2 speed grade targets designs requiring a balance of performance, power consumption, and design flexibility across industrial, communications, instrumentation, and embedded processing systems.

A field-programmable gate array is a semiconductor whose digital logic can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable I/O, block RAM, DSP arithmetic resources, clock-management circuits, and high-speed serial transceivers. This architecture allows parallel processing, hardware acceleration, protocol bridging, and deterministic control functions to be consolidated into one device rather than implemented across multiple fixed-function chips.

The XC7K160T belongs to the Kintex-7 family and provides 162,240 logic cells with a stated maximum operating frequency of 710 MHz. Its 250 I/Os support connection to external memory, high-speed interfaces, control signals, clocks, and data converters. The 676-ball FCBGA package also exposes the device's high-speed I/O and configuration resources, while its fine-pitch ball pitch makes careful PCB layout, thermal management, and assembly process control essential.

The -2 suffix identifies the device speed grade. Compared with a -1 part, the -2 grade provides a higher performance level; a -3 grade is faster still. Core-voltage information associated with this device lists an operating range of 970 mV to 1.03 V. Because Kintex-7 devices contain configurable power-management features, actual rail requirements and current depend on the selected logic, memory interfaces, transceivers, I/O standards, clocking, and utilization reported by the implementation tools.

Typical uses include industrial control, communications infrastructure, test and measurement, high-speed data acquisition, signal processing, network equipment, and embedded systems that benefit from parallel programmable logic. The large logic capacity supports parallel datapaths, protocol state machines, packet processing, and custom accelerator pipelines. Integrated block RAM and DSP resources can reduce reliance on external components when the design maps efficiently onto the FPGA architecture.

When laying out a board around this FCBGA device, follow the manufacturer pinout, power-plane, decoupling, and high-speed-interface guidance exactly. Provide continuous supply planes, place bypass capacitors at the relevant power balls, route clock and differential pairs with controlled impedance, and confirm the assembly process supports the package geometry. Check worst-case junction temperature, configured transceivers, I/O standards, and core utilization before approving the power budget.

This product record combines the exact manufacturer-family parameters, package information, speed-grade references, drop-in candidates, and engineering guidance needed to evaluate a board-level migration. It emphasizes where an alternate speed grade changes performance, where package suffixes require procurement review, and which design constraints remain unchanged when the FPGA itself is replaced.

جێگرەوەکانی جێگۆڕکێ بۆ XC7K160T-2FF676I — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ XC7K160T-2FF676I (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Maximum Clock Frequency, Logic Cells, Speed Grade, Process Technology.

AMD
Maximum Clock Frequency: 1,098 MHz
Speed Grade: -1
Process Technology: 28 nm
بەراوردکردن لەگەڵ XC7K160T-2FF676I →
AMD
Package: 676-ball FCBGA, 29 mm x 29 mm
Maximum Clock Frequency: 1098 MHz
Process Technology: 28 nm CMOS
بەراوردکردن لەگەڵ XC7K160T-2FF676I →
AMD
Package: 676-pin FCBGA, 27 × 27 mm
Maximum Clock Frequency: 1098 MHz
Speed Grade: -1
بەراوردکردن لەگەڵ XC7K160T-2FF676I →
AMD
Package: 676-BBGA, FCBGA
Logic Cells: 162240
بەراوردکردن لەگەڵ XC7K160T-2FF676I →

XC7K160T-2FFG676I

✅ جێگرەوەی ڕاستەوخۆ
AMD
📦 676-ball FCBGA
Kintex-7 · 162240 · 11980800 bits · 600 · 400 · 676-BBGA, FCBGA · -2 · -40°C to +100°C

پەیوەندی بۆ نرخ

بینینی داتاشیت →

XC7K160T-2FB676I

✅ جێگرەوەی ڕاستەوخۆ
AMD
📦 676-ball FCBGA
Kintex-7 field-programmable gate array (FPGA) · 162240 cells · 400 I/O · 28 nm · 1 V · -2 · 676-pin FCBGA · 676 terminals

پەیوەندی بۆ نرخ

بینینی داتاشیت →

XC7K160T-2FBG676I

✅ جێگرەوەی ڕاستەوخۆ
📦 676-ball FCBGA
تایبەتمەندییەکانی گونجاو

پەیوەندی بۆ نرخ

XC7K160T-1FF676I

✅ جێگرەوەی ڕاستەوخۆ
AMD
📦 676-ball FCBGA
Kintex-7 Field-Programmable Gate Array (FPGA) · 162,240 cells · 12,675 CLBs · 28 nm CMOS · 250 I/Os · 1098 MHz · 1 V · -1

پەیوەندی بۆ نرخ

بینینی داتاشیت →

XC7K160T-3FF676I

✅ جێگرەوەی ڕاستەوخۆ
📦 676-ball FCBGA
Retains the XC7K160T logic and 676-ball package but changes from the -2 speed grade to -3, increasing the performance tier by one grade.

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

XC7K160T-1FFG676I

✅ جێگرەوەی ڕاستەوخۆ
AMD
📦 676-ball FCBGA
Kintex-7 · 162,240 cells · 12,675 CLBs · 11,980,800 bits · 600 slices · 400 I/Os · 1098 MHz · 28 nm CMOS

پەیوەندی بۆ نرخ

بینینی داتاشیت →

XC7K160T-2FF676I زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Product Type Field-Programmable Gate Array (FPGA)
FPGA Family Kintex-7
Logic Cells 162,240 cells
User I/O Count 250 I/Os
زۆرترین فرێکوێنسیی کاتژمێر 710 MHz
Speed Grade -2
Core Voltage Range 970 mV to 1.03 V
پاکێج 676-ball FCBGA
Package Family 676-BBGA FCBGA
Clock Management MMCM and PLL resources
Manufacturer AMD / Xilinx
Product Family Kintex-7
Device Type Programmable Logic IC

ڕێنمایی ڕێکخستنی پینی XC7K160T-2FF676I 676-bbga fcbga

ڕێکخستنی پین بۆ XC7K160T-2FF676I (پاکێجی 676-bbga fcbga). ئەم IC ی دیجیتاڵە GPIO، ڕووکارەکانی پەیوەندی (UART، SPI، I2C) و پینی وزە لەخۆدەگرێت. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ فەنکشنەکانی پینی جێگرەوە و ھەڵبژاردنەکانی ڕێکخستن. پێویستە بۆ دیزاینی سیستەمی جێگیر و ڕێکخستنی PCB.

نەخشەی پینئاوتی پاکێجی 676-bbga fcbga بۆ XC7K160T-2FF676I

هیچ داتای وردی پینئاوت بەردەست نییە بۆ XC7K160T-2FF676I.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

XC7K160T-2FF676I گونجاوە بۆ 6 بەکارھێنانs: Industrial Control and Automation, High-Speed Data Acquisition, Communications and Network Equipment, Test and Measurement Instrumentation, Digital Signal Processing, Aerospace and Defense Systems.

🏭

Industrial Control and Automation

The XC7K160T-2FF676I fits industrial controllers that combine deterministic sequencing, parallel data processing, and multiple communication interfaces. Its 162,240 logic cells allow control logic, diagnostics, protocol handling, and safety interlocks to coexist in one Kintex-7 device, while the 250 user I/Os provide substantial connectivity to sensors, actuators, and field buses. The -2 speed grade and 710 MHz maximum frequency give designers more timing margin than the -1 grade when processing multiple parallel data paths. In implementation, use the manufacturer clocking and pin-placement guidance, reserve configuration resources, and place decoupling directly at the relevant package power balls.

📡

High-Speed Data Acquisition

The XC7K160T-2FF676I is appropriate for parallel data-acquisition systems requiring acquisition control, real-time filtering, packetization, and interface management in programmable logic. A 710 MHz maximum device frequency allows demanding internal pipelines to be divided across multiple clock domains, and the 162,240 logic cells provide substantial parallelism for FIR filters, FFT stages, threshold detection, and data formatting. The 250 I/Os can connect converters, memory, clocks, and acquisition modules, although actual input rate depends on pin assignments and timing. Use matched clocking, controlled-impedance routing, and post-route timing analysis for every acquisition interface.

🌐

Communications and Network Equipment

The XC7K160T-2FF676I can support packet processing, protocol conversion, traffic shaping, and custom link-layer functions in communications equipment. Its 162,240 logic cells are suitable for parallel header parsing, queues, classification engines, and test instrumentation, while the 676-ball FCBGA exposes a large set of user I/Os and dedicated FPGA resources. The -2 grade offers a practical balance for designs that require more timing margin than -1 without moving to the highest -3 performance grade. High-speed interfaces require strict clock topology, impedance-controlled routing, and careful isolation between sensitive and aggressive I/O paths.

🔧

Test and Measurement Instrumentation

The XC7K160T-2FF676I fits programmable test equipment that requires concurrent pattern generation, measurement control, trigger sequencing, and data capture. The 162,240 logic cells allow multiple timing domains and measurement channels to be integrated while the 250 user I/Os support instrument control, reference clocks, data converters, and communication links. A maximum clock frequency of 710 MHz supports high-rate internal state machines and digital signal processing, although instrument bandwidth is also limited by external converters and routing. Plan configuration storage, startup sequencing, calibration tables, and deterministic clocking alongside the FPGA logic.

📊

Digital Signal Processing

The XC7K160T-2FF676I is well suited to parallel DSP workloads such as filtering, modulation, correlation, and spectral analysis. Its 162,240 logic cells can host multiple arithmetic pipelines, while the -2 speed grade provides up to a listed 710 MHz operating frequency for internal clock domains. The large I/O count supports concurrent converters, memory interfaces, and system control, but the real throughput depends on mapping efficiency and memory bandwidth. Use the manufacturer's DSP and memory mapping guidance, check arithmetic timing after placement, and avoid assuming that headline device frequency equals the sample rate of an external converter interface.

✈️

Aerospace and Defense Systems

The XC7K160T-2FF676I can support programmable navigation, signal-processing, communications, and mission-control functions when its exact ordering code is qualified for the intended environmental and reliability requirements. The Kintex-7 family provides 162,240 logic cells, 250 user I/Os, and a -2 performance option for complex concurrent workloads. Because the suffix and temperature grade determine the precise ordering configuration, engineers should verify package marking, operating range, screening, and documentation before installation. In flight hardware, preserve configuration redundancy and validate clocking, power sequencing, radiation effects, and recovery behavior for the complete system.

What are the key specifications of XC7K160T-2FF676I that engineers should know?
The XC7K160T-2FF676I is a Kintex-7 FPGA with 162,240 logic cells, 250 user I/Os, a maximum frequency of 710 MHz, and a 676-ball FCBGA package. According to the AMD/Xilinx Kintex-7 datasheet, the -2 speed grade is part of the family's -3, -2, -1, -1L, and -2L grade range. Its core-voltage range is listed as 970 mV to 1.03 V. The device is intended for parallel programmable logic, embedded processing, DSP, memory-interface, and high-speed communications designs that can use the full 676-ball package.
Where can I download the XC7K160T-2FF676I datasheet PDF?
The XC7K160T datasheet is available through the AMD/Xilinx document entry linked on this page. The manufacturer document covers Kintex-7 architecture, speed grades, electrical characteristics, package information, configuration, memory, DSP, clocking, and I/O resources. Use the manufacturer datasheet as the controlling reference for pin assignments, power sequencing, operating limits, and timing because distributor summaries can omit grade-specific or package-specific details. The search reference for this family also points to the Kintex-7 datasheet covering the -3, -2, -1, -1L, and -2L speed grades.
Where can I find the XC7K160T-2FF676I pinout and package drawing?
The XC7K160T-2FF676I pinout is defined by the AMD/Xilinx Kintex-7 package documentation for the 676-ball FCBGA. Use the pin table, package drawing, and recommended land pattern together; they are different views of the same mechanical and electrical interface. This page does not reproduce the 676-ball assignment because the complete manufacturer pin table was not included in the product records. Verify every power, ground, configuration, clock, and user-I/O connection directly against the package-specific documentation before PCB release.
What is the difference between XC7K160T-2FF676I and XC7K160T-3FF676I?
The XC7K160T-2FF676I and XC7K160T-3FF676I use the same Kintex-7 device family and 676-pin package designation, but the numeric suffix selects different speed grades. The -3 part is the higher-performance grade, while the target -2 part is one grade lower. The Kintex-7 documentation identifies -3 as having the highest family performance. Both retain 162,240 logic cells and 250 user I/Os, making timing closure the principal engineering difference rather than a change in the basic logic or I/O capacity.
When should I choose XC7K160T-2FF676I over XC7K160T-1FF676I?
Choose the XC7K160T-2FF676I when the design requires a higher -2 speed grade and the timing target cannot be met reliably by the -1 grade. Both parts retain the same Kintex-7 logic-cell and I/O organization, so the decision is principally performance timing rather than functional architecture. The -1 option may be appropriate for lower-cost designs with relaxed timing closure. Confirm the complete design with the relevant implementation and timing tools because achievable clock rate also depends on logic depth, routing, memory use, and I/O constraints.
What is the best drop-in replacement for XC7K160T-2FF676I?
The closest same-family drop-in choices are other XC7K160T devices using the compatible 676-ball package and -2 speed grade, including the FF676I and FFG676I suffix variants listed for this design. A lower -1 or higher -3 speed grade changes timing performance, so it should be selected only after timing analysis. The package suffix must also be checked because FF, FB, and FFG designations may carry different procurement, temperature, or lead-finish implications. No cross-brand pin-compatible replacement was established, so an Artix-7 or Virtex-7 device is not a universal substitute.
Can XC7K160T-2FBG676I replace XC7K160T-2FF676I?
The XC7K160T-2FBG676I can be a candidate only after its package drawing, ball map, power architecture, and suffix-specific characteristics are checked against the target board. Both MPNs identify a 676-ball Kintex-7 configuration with a -2 speed grade, but suffix changes can affect package, temperature, or lead-finish requirements. According to cross-reference information, XC7K160T-2FBG676I is associated with the same 676-ball family, but matching the MPN family alone does not prove every board-level condition is identical.
Is XC7K160T-2FFG676I pin-compatible with XC7K160T-2FF676I?
The XC7K160T-2FFG676I is a closely related 676-ball XC7K160T configuration and is commonly treated as a board-level replacement candidate when the package suffix has no effect on the design. Both use the -2 speed designation and the same 162,240-cell Kintex-7 device family. Before substitution, compare the package drawings, electrical tables, temperature marking, finish requirements, and purchasing constraints for FF676I versus FFG676I. This is a same-family package match, not an assurance that every procurement attribute is identical.
What can replace XC7K160T-2FF676I?
XC7K160T-2FFG676I is the leading same-family replacement candidate for XC7K160T-2FF676I because it preserves the Kintex-7 device, -2 speed grade, and 676-ball package class. XC7K160T-1FF676I and XC7K160T-3FF676I are alternate speed grades rather than exact performance matches, while XC7K160T-2FB676I and XC7K160T-2FBG676I require suffix-level review. No verified cross-brand replacement was identified. Treat any migration as a controlled engineering change with footprint, pin, power, timing, and lifecycle checks.
Is XC7K160T-2FF676I suitable for high-speed data acquisition?
The XC7K160T-2FF676I is suitable for many parallel high-speed data-acquisition designs because it combines 162,240 logic cells, 250 user I/Os, and a maximum frequency of 710 MHz in a 676-ball FCBGA. Its programmable logic can implement acquisition control, buffering, filtering, formatting, and interface state machines in parallel. Practical performance depends on input standards, trace lengths, clocking, conversion rate, memory bandwidth, and timing closure. Validate the analog interface and FPGA timing together rather than assuming the headline frequency applies directly to the external data path.
How much power does XC7K160T-2FF676I consume?
Power consumption for the XC7K160T-2FF676I depends on the selected Kintex-7 resources, configured I/O standards, transceivers, clock rates, core voltage, and utilization. The device's core-voltage range is listed as 970 mV to 1.03 V, but that range is not a power-consumption specification. Use the manufacturer's power-estimation tools with a completed design and include the board's supply losses. Check worst-case temperature and resource activity, because a heavily utilized design can consume substantially more power than a lightly loaded implementation.
What thermal and PCB considerations apply to the 676-ball FCBGA?
The 676-ball FCBGA requires a thermal design that accounts for heat spreading through the package, board copper, vias, and the enclosure. Place power and ground structures according to the manufacturer package guidance, use local bulk and high-frequency decoupling, and keep high-speed routing away from noisy power paths. Thermal performance depends on board area, copper layers, via pattern, airflow, ambient temperature, and configured power. Perform a system-level thermal estimate after implementation because the available package information alone cannot determine junction temperature.
Is XC7K160T-2FF676I in stock, and what is its lead time?
Current stock and lead time should be confirmed through the Request a Quote form on this page. The product listings indicate market availability for the exact MPN, but inventory and lead time can vary with quantity, package suffix, manufacturing status, and regional supply conditions. Request the required quantity, date code, factory-seal requirements, and traceability documentation with the quotation. The manufacturer-family documentation also notes that Kintex-7 devices exist in multiple speed and temperature grades, so the complete ordering code must be confirmed before an order is released.
Where can I buy XC7K160T-2FF676I online and what is the price?
Use the Request a Quote form on this page to obtain current XC7K160T-2FF676I availability and commercial terms. The exact-part listings cover multiple quantity and package-ordering contexts, but they do not provide a qualifying quantity-break table that can be represented as fixed customer pricing. Quote requests should state quantity, target date, date-code preference, and whether the complete factory-sealed configuration is required. This approach prevents a starting-price figure or a different suffix from being mistaken for the price and configuration of the target MPN.
What is the best AMD/Xilinx equivalent for XC7K160T-2FF676I?
The best AMD/Xilinx equivalent is the XC7K160T-2FFG676I when its package suffix satisfies the board and procurement requirements, because it preserves the XC7K160T device, -2 speed grade, and 676-ball package class. XC7K160T-2FB676I and XC7K160T-2FBG676I are additional suffix-level candidates that need package and marking review. No verified AMD/Xilinx part with a different device family was shown to be a universal drop-in replacement, and no cross-brand equivalent met the required compatibility standard.
How do I compare XC7K160T-2FF676I with XC7K160T-1FF676I for timing closure?
Compare the XC7K160T-2FF676I with XC7K160T-1FF676I by running the same design through the supported Kintex-7 implementation flow and reviewing timing at the required I/O and internal clock targets. Both retain 162,240 logic cells and 250 user I/Os, while the -2 target provides a higher speed grade than -1. The practical decision depends on whether the -1 design meets setup, hold, and clocking requirements with suitable margin. Use post-route timing results, not only nominal frequency, to establish whether the lower-speed grade is viable.

داتای سەرچاوەی ئەندازیاری بۆ XC7K160T-2FF676I — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the XC7K160T-2FF676I when a design needs 162,240 Kintex-7 logic cells, 250 user I/Os, a 676-ball FCBGA footprint, and the -2 speed tier without moving to the highest -3 performance grade. Select XC7K160T-2FFG676I or XC7K160T-2FBG676I when the package ordering suffix satisfies procurement and manufacturing requirements; verify each package drawing and suffix-specific attribute before substitution. XC7K160T-1FF676I or XC7K160T-1FFG676I make sense only when lower speed is acceptable and post-route timing confirms adequate margin. XC7K160T-3FF676I is appropriate when maximum family performance is worth the associated cost and power implications. Other Kintex-7 capacities, Artix-7 devices, and Virtex-7 devices are not universal drop-ins because logic resources, I/O availability, power architecture, or timing may differ.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە XC7K160T-2FFG676I XC7K160T-2FB676I XC7K160T-2FBG676I XC7K160T-1FF676I XC7K160T-3FF676I XC7K160T-1FFG676I
Package 676-ball FCBGA 676-ball FCBGA 676-ball FCBGA 676-ball FCBGA 676-ball FCBGA 676-ball FCBGA 676-ball FCBGA
Brand AMD / Xilinx AMD / Xilinx AMD / Xilinx AMD / Xilinx AMD / Xilinx AMD / Xilinx AMD / Xilinx
FPGA Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Speed Grade -2 -2 -2 -2 -1 -3 -1

جیاکەرەوە سەرەکییەکان

  • Balanced -2 performance tier within the Kintex-7 family (بەراورد بەXC7K160T-1FF676I)
  • Lower power and cost tier than the highest-performance grade (بەراورد بەXC7K160T-3FF676I)
  • Close same-speed migration option with extensive logic capacity (بەراورد بەXC7K160T-2FFG676I)
  • Parallel processing headroom for multi-domain systems (بەراورد بەXC7K160T-1FFG676I)

تێبینییەکانی دیزاین

Use the package-specific power, ground, and ball-escape guidance from the AMD/Xilinx Kintex-7 documentation. The 676-ball FCBGA requires uninterrupted power distribution, dense via access beneath the device, local bulk and high-frequency decoupling, and careful via-in-pad or via-adjacent construction where the assembly process permits it. Confirm the selected FF, FB, or FFG package drawing before releasing the land pattern because suffix-level package differences must not be treated as cosmetic.

Separate clocks, high-speed serial links, and sensitive inputs from switching power and digital return paths as far as the package and board stack-up allow. Match differential and single-ended interfaces to the selected I/O standard and target impedance from the manufacturer's interface guidelines. Keep configuration pins and clock inputs away from noisy nets, avoid routing over split power boundaries, and use the implementation tool's recommended clock regions and high-performance pins before committing to a placement.

Estimate the implemented design's power rather than using the 970 mV to 1.03 V core-voltage range as a power specification. Include configured transceivers, I/O standards, memory activity, clocking, and core utilization in the manufacturer's power-estimation workflow. The resulting loss budget should cover regulator efficiency, copper and via resistance, ambient conditions, board copper area, and airflow. Validate the final assembly with thermal analysis or measurement because FCBGA heat spreading depends strongly on the complete PCB stack-up.

Do not treat a same-family suffix change as an unconditional substitution. Before replacing XC7K160T-2FF676I, compare the exact package drawing, ball map, electrical tables, temperature range, lead finish, and ordering information. Speed-grade substitutions also require fresh post-route timing analysis: a -1 part reduces timing margin, while a -3 part changes performance and power behavior. Preserve configuration loading, startup sequencing, clocking, and any system-specific voltage requirements during the migration.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The exact compliance status and suffix-specific package finish were not established. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation for the released ordering code.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

xc7k160t 2ffg676i xc7k160t 1ffg676i xc7k160t 1fbg676c xc7k160t 2fbg484i xc7k160t 2fbg676i xc7k160t ffg676 xc7k160t 2fbg676c xc7k160t datasheet xc7k160t 2fbg484c XC7K160T-2FF676I datasheet PDF XC7K160T-2FF676I pinout XC7K160T-2FF676I replacement XC7K160T-2FF676I equivalent XC7K160T-2FF676I price AMD XC7K160T-2FF676I

پێکهاتە و زاراوە پەیوەندیدارەکان

AMD Xilinx XC7K160T-2FF676I XC7K160T-2FFG676I XC7K160T-2FB676I XC7K160T-2FBG676I XC7K160T-1FF676I XC7K160T-3FF676I Kintex-7 FPGA field-programmable gate array programmable logic configurable logic block block RAM DSP slice MMCM PLL 676-ball FCBGA FCBGA package family surface-mount package 162,240 logic cells 250 user I/Os 710 MHz maximum frequency 970 mV to 1.03 V core voltage programmable logic device
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ