AD5142ABCPZ10-RL7 vs AD5258BRMZ100 Comparison
Detailed side-by-side comparison of AD5142ABCPZ10-RL7 by Analog Devices and AD5258BRMZ100 by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ ActiveAnalog Devices
AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI
AD5258BRMZ100 ⚠ Last Time BuySpecification Comparison
| Parameter | AD5142ABCPZ10-RL7 | AD5258BRMZ100 |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Last Time Buy |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $3.36 | $1.08 |
| Number of Potentiometers | 2 (dual) | — |
| Nominal End-to-End Resistance (R-AB) | 10 kΩ | — |
| Number of Taps | 256 positions | 64 |
| Interface | I²C-compatible (SCL up to 3 MHz) | I²C-compatible (2-wire) |
| Memory Type | Non-volatile EEPROM | — |
| Resistor Tolerance | ±8% | — |
| Temperature Coefficient | 35 ppm/°C nominal | — |
| Wiper Resistance (ends of array) | 40 Ω typical | — |
| Continuous Current on A/B/W Pins | ±6 mA max | — |
| Supply Voltage (VDD) | 2.3 V to 5.5 V | — |
| Operating Temperature | -40 °C to +125 °C | — |
| Package | 16-lead LFCSP (3 mm × 3 mm) with EP | 10-pin MSOP (RM), 3 mm × 4.9 mm |
| Mounting Type | Surface Mount | — |
| Taper | Linear | Linear |
| RoHS Status | Compliant | Compliant |
| AEC-Q100 Qualification | Not AEC-Q100 qualified (industrial grade) | — |
| Soft Reset | Yes (loads default wiper setting) | — |
| Product Type | — | Digital Potentiometer (DigiPOT) |
| Number of Channels | — | 1 |
| End-to-End Resistance | — | 100 kΩ |
| Resistance Tolerance | — | ±30 % |
| EEPROM-stored Tolerance Accuracy | — | 0.1 % |
| Address Decode Pins | — | AD0 (2 pins, supports up to 4 devices on bus) |
| VLOGIC Range | — | 2.7 V to 5.5 V |
| Analog Supply / Terminal Voltage | — | 2.7 V to 5.5 V |
| Power-on EEPROM Refresh Time | — | < 1 ms |
| Nonvolatile Memory | — | Yes (wiper settings retained on power-down) |
| Software Write Protect | — | Yes (via I²C command) |
| Operating Temperature Range | — | −40 °C to +125 °C |