AD5142ABCPZ10-RL7 vs AD5258BRMZ100 So sánh

So sánh chi tiết song song của AD5142ABCPZ10-RL7 bằng Analog Devices và AD5258BRMZ100 bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
AD5142ABCPZ10-RL7 AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices

AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices

AD5142ABCPZ10-RL7 ✓ Hoạt động
Analog Devices
AD5258BRMZ100 AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI

AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI

AD5258BRMZ100 ⚠ Lần mua cuối

So sánh thông số kỹ thuật

Tham số AD5142ABCPZ10-RL7 AD5258BRMZ100
Thương hiệu Analog Devices Analog Devices
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Lần mua cuối
Number of Potentiometers 2 (dual) —
Nominal End-to-End Resistance (R-AB) 10 kΩ —
Number of Taps 256 positions 64
Giao diện I²C-compatible (SCL up to 3 MHz) I²C-compatible (2-wire)
Kiểu bộ nhớ Non-volatile EEPROM —
Resistor Tolerance ±8% —
Temperature Coefficient 35 ppm/°C nominal —
Wiper Resistance (ends of array) 40 Ω typical —
Continuous Current on A/B/W Pins ±6 mA max —
Supply Voltage (VDD) 2.3 V to 5.5 V —
Nhiệt độ hoạt động -40 °C to +125 °C —
Hộp 16-lead LFCSP (3 mm × 3 mm) with EP 10-pin MSOP (RM), 3 mm × 4.9 mm
Kiểu lắp đặt Surface Mount —
Taper Linear Linear
Trạng thái RoHS Compliant Compliant
AEC-Q100 Qualification Not AEC-Q100 qualified (industrial grade) —
Soft Reset Yes (loads default wiper setting) —
Product Type — Digital Potentiometer (DigiPOT)
Number of Channels — 1
End-to-End Resistance — 100 kΩ
Resistance Tolerance — ±30 %
EEPROM-stored Tolerance Accuracy — 0.1 %
Address Decode Pins — AD0 (2 pins, supports up to 4 devices on bus)
VLOGIC Range — 2.7 V to 5.5 V
Analog Supply / Terminal Voltage — 2.7 V to 5.5 V
Power-on EEPROM Refresh Time — < 1 ms
Nonvolatile Memory — Yes (wiper settings retained on power-down)
Software Write Protect — Yes (via I²C command)
Khoảng nhiệt độ hoạt động — −40 °C to +125 °C

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá