AD5142ABCPZ10-RL7 vs AD5258BRMZ100 Comparaison
Comparaison détaillée côte à côte de AD5142ABCPZ10-RL7 par Analog Devices et AD5258BRMZ100 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ ActifAnalog Devices
AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI
AD5258BRMZ100 ⚠ Dernier achatComparaison des spécifications
| Paramètre | AD5142ABCPZ10-RL7 | AD5258BRMZ100 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Dernier achat |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,36 | $1,08 |
| Number of Potentiometers | 2 (dual) | — |
| Nominal End-to-End Resistance (R-AB) | 10 kΩ | — |
| Number of Taps | 256 positions | 64 |
| Interface | I²C-compatible (SCL up to 3 MHz) | I²C-compatible (2-wire) |
| Type de mémoire | Non-volatile EEPROM | — |
| Resistor Tolerance | ±8% | — |
| Temperature Coefficient | 35 ppm/°C nominal | — |
| Wiper Resistance (ends of array) | 40 Ω typical | — |
| Continuous Current on A/B/W Pins | ±6 mA max | — |
| Supply Voltage (VDD) | 2.3 V to 5.5 V | — |
| Température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | 16-lead LFCSP (3 mm × 3 mm) with EP | 10-pin MSOP (RM), 3 mm × 4.9 mm |
| Type de montage | Surface Mount | — |
| Taper | Linear | Linear |
| Statut RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Not AEC-Q100 qualified (industrial grade) | — |
| Soft Reset | Yes (loads default wiper setting) | — |
| Product Type | — | Digital Potentiometer (DigiPOT) |
| Number of Channels | — | 1 |
| End-to-End Resistance | — | 100 kΩ |
| Resistance Tolerance | — | ±30 % |
| EEPROM-stored Tolerance Accuracy | — | 0.1 % |
| Address Decode Pins | — | AD0 (2 pins, supports up to 4 devices on bus) |
| VLOGIC Range | — | 2.7 V to 5.5 V |
| Analog Supply / Terminal Voltage | — | 2.7 V to 5.5 V |
| Power-on EEPROM Refresh Time | — | < 1 ms |
| Nonvolatile Memory | — | Yes (wiper settings retained on power-down) |
| Software Write Protect | — | Yes (via I²C command) |
| Plage de température de fonctionnement | — | −40 °C to +125 °C |