AD526CDZ vs AD526CD Comparison
Detailed side-by-side comparison of AD526CDZ by Analog Devices and AD526CD by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
AD526CD - 16-Ceramic-DIP Programmable Gain Amplifier | Analog Devices
AD526CD UnknownSpecification Comparison
| Parameter | AD526CDZ | AD526CD |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Unknown |
| Amplifier Type | Programmable gain amplifier | — |
| Architecture | Single-ended monolithic SPGA | 1 amplifier circuit, single-ended |
| Number of Amplifiers | 1 circuit | — |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 | — |
| Gain Error at Gain 1 | 0.02% maximum, C grade | — |
| Gain Error at Gain 16 | 0.5% maximum, C grade | — |
| Bandwidth | 4 MHz | — |
| Slew Rate | 24 V/µs | [DATA_NEEDED: slew rate] |
| Supply Voltage Range | ±4.5 V to ±16.5 V | [DATA_NEEDED: supply voltage range] |
| Control Input Compatibility | TTL-compatible latched inputs | — |
| Cascade Gain Range | Up to 256 with two chips | — |
| External Gain-Setting Components | None required | 0 components required |
| Operating Temperature Range | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Package | 16-CDIP, 0.300 inch (7.62 mm) | 16-CDIP, ceramic dual in-line package |
| Mounting Type | Through-hole | Through-hole |
| Packaging | Tube | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Single-ended monolithic software-programmable gain amplifier (SPGA) |
| Available Gains | — | 1, 2, 4, 8, and 16 |
| Minimum Gain | — | 1 ratio |
| Maximum Gain | — | 16 ratio |
| Gain Control Interface | — | TTL-compatible latched inputs |
| Integrated Elements | — | 1 amplifier and 1 resistor network |
| Pin Count | — | 16 pins |
| Input Signal Type | — | Single-ended |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Small-Signal Bandwidth | — | [DATA_NEEDED: small-signal bandwidth] |
| Noise Performance | — | [DATA_NEEDED: input noise specification] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |