AD526CDZ vs AD526CD 比較
詳細並排比較 AD526CDZ 由 Analog Devices 與 AD526CD 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Analog Devices
AD526CD - 16-Ceramic-DIP Programmable Gain Amplifier | Analog Devices
AD526CD Unknown規格比較
| 參數 | AD526CDZ | AD526CD |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | Unknown |
| Amplifier Type | Programmable gain amplifier | — |
| Architecture | Single-ended monolithic SPGA | 1 amplifier circuit, single-ended |
| Number of Amplifiers | 1 circuit | — |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 | — |
| Gain Error at Gain 1 | 0.02% maximum, C grade | — |
| Gain Error at Gain 16 | 0.5% maximum, C grade | — |
| Bandwidth | 4 MHz | — |
| Slew Rate | 24 V/µs | [DATA_NEEDED: slew rate] |
| Supply Voltage Range | ±4.5 V to ±16.5 V | [DATA_NEEDED: supply voltage range] |
| Control Input Compatibility | TTL-compatible latched inputs | — |
| Cascade Gain Range | Up to 256 with two chips | — |
| External Gain-Setting Components | None required | 0 components required |
| 工作溫度範圍 | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| 封裝 | 16-CDIP, 0.300 inch (7.62 mm) | 16-CDIP, ceramic dual in-line package |
| 安裝類型 | Through-hole | Through-hole |
| Packaging | Tube | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Single-ended monolithic software-programmable gain amplifier (SPGA) |
| Available Gains | — | 1, 2, 4, 8, and 16 |
| Minimum Gain | — | 1 ratio |
| Maximum Gain | — | 16 ratio |
| Gain Control Interface | — | TTL-compatible latched inputs |
| Integrated Elements | — | 1 amplifier and 1 resistor network |
| 腳位數 | — | 16 pins |
| Input Signal Type | — | Single-ended |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Small-Signal Bandwidth | — | [DATA_NEEDED: small-signal bandwidth] |
| Noise Performance | — | [DATA_NEEDED: input noise specification] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |