AD526CDZ vs AD526CD Comparaison
Comparaison détaillée côte à côte de AD526CDZ par Analog Devices et AD526CD par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD526CD - 16-Ceramic-DIP Programmable Gain Amplifier | Analog Devices
AD526CD UnknownComparaison des spécifications
| Paramètre | AD526CDZ | AD526CD |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Amplifier Type | Programmable gain amplifier | — |
| Architecture | Single-ended monolithic SPGA | 1 amplifier circuit, single-ended |
| Number of Amplifiers | 1 circuit | — |
| Programmable Gain Settings | 1, 2, 4, 8, and 16 | — |
| Gain Error at Gain 1 | 0.02% maximum, C grade | — |
| Gain Error at Gain 16 | 0.5% maximum, C grade | — |
| Bandwidth | 4 MHz | — |
| Slew Rate | 24 V/µs | [DATA_NEEDED: slew rate] |
| Supply Voltage Range | ±4.5 V to ±16.5 V | [DATA_NEEDED: supply voltage range] |
| Control Input Compatibility | TTL-compatible latched inputs | — |
| Cascade Gain Range | Up to 256 with two chips | — |
| External Gain-Setting Components | None required | 0 components required |
| Plage de température de fonctionnement | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 16-CDIP, 0.300 inch (7.62 mm) | 16-CDIP, ceramic dual in-line package |
| Type de montage | Through-hole | Through-hole |
| Packaging | Tube | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Single-ended monolithic software-programmable gain amplifier (SPGA) |
| Available Gains | — | 1, 2, 4, 8, and 16 |
| Minimum Gain | — | 1 ratio |
| Maximum Gain | — | 16 ratio |
| Gain Control Interface | — | TTL-compatible latched inputs |
| Integrated Elements | — | 1 amplifier and 1 resistor network |
| Nombre de broches | — | 16 pins |
| Input Signal Type | — | Single-ended |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Small-Signal Bandwidth | — | [DATA_NEEDED: small-signal bandwidth] |
| Noise Performance | — | [DATA_NEEDED: input noise specification] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |