AD621ANZ vs INA141P Comparison
Detailed side-by-side comparison of AD621ANZ by Analog Devices and INA141P by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P UnknownSpecification Comparison
| Parameter | AD621ANZ | INA141P |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Unknown |
| Product Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| Package | 8-pin PDIP (0.300 inch, 7.62 mm pitch) | 8-pin plastic DIP |
| Mounting Type | Through-hole | Through-hole |
| Packaging Type | Tube | — |
| Small-Signal Bandwidth | 800 kHz at -3 dB | — |
| Slew Rate | 1.2 V/µs | — |
| Maximum Supply Current | 1.3 mA | — |
| Input Bias Current | 500 pA | — |
| Input Offset Voltage | 75 µV | — |
| Operating Temperature Range | -40°C to +85°C | -40 °C to +85 °C |
| Output Type | [DATA_NEEDED: output type] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Input Common-Mode Rejection | [DATA_NEEDED: input common-mode rejection] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Halogen-Free Status | Compliant | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | unknown |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Available Gain Settings | — | 10 and 100 V/V |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 117 dB |
| Input Protection | — | ±40 V |
| Supply Range | — | ±18 V |
| Architecture | — | Three-op-amp instrumentation-amplifier design |
| Bandwidth at Gain 100 | — | 200 kHz |
| Package Pin Count | — | 8 pins |
| Low-Power Supply Current | — | [DATA_NEEDED: maximum quiescent current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |