AD621ANZ vs INA141P 비교
다음의 상세 나란히 비교: AD621ANZ 제조: Analog Devices 및 INA141P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P Unknown사양 비교
| 파라미터 | AD621ANZ | INA141P |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | Unknown |
| Product Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| 패키지 | 8-pin PDIP (0.300 inch, 7.62 mm pitch) | 8-pin plastic DIP |
| 실장 유형 | Through-hole | Through-hole |
| Packaging Type | Tube | — |
| Small-Signal Bandwidth | 800 kHz at -3 dB | — |
| Slew Rate | 1.2 V/µs | — |
| Maximum Supply Current | 1.3 mA | — |
| Input Bias Current | 500 pA | — |
| Input Offset Voltage | 75 µV | — |
| 동작 온도 범위 | -40°C to +85°C | -40 °C to +85 °C |
| 출력 유형 | [DATA_NEEDED: output type] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Input Common-Mode Rejection | [DATA_NEEDED: input common-mode rejection] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Halogen-Free Status | Compliant | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | unknown |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Available Gain Settings | — | 10 and 100 V/V |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 117 dB |
| Input Protection | — | ±40 V |
| Supply Range | — | ±18 V |
| Architecture | — | Three-op-amp instrumentation-amplifier design |
| Bandwidth at Gain 100 | — | 200 kHz |
| Package Pin Count | — | 8 pins |
| Low-Power Supply Current | — | [DATA_NEEDED: maximum quiescent current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |