AD621ANZ vs INA141P 比較
詳細並排比較 AD621ANZ 由 Analog Devices 與 INA141P 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P Unknown規格比較
| 參數 | AD621ANZ | INA141P |
|---|---|---|
| 品牌 | Analog Devices | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | Unknown |
| Product Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 circuit | — |
| 封裝 | 8-pin PDIP (0.300 inch, 7.62 mm pitch) | 8-pin plastic DIP |
| 安裝類型 | Through-hole | Through-hole |
| Packaging Type | Tube | — |
| Small-Signal Bandwidth | 800 kHz at -3 dB | — |
| Slew Rate | 1.2 V/µs | — |
| Maximum Supply Current | 1.3 mA | — |
| Input Bias Current | 500 pA | — |
| Input Offset Voltage | 75 µV | — |
| 工作溫度範圍 | -40°C to +85°C | -40 °C to +85 °C |
| 輸出類型 | [DATA_NEEDED: output type] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Input Common-Mode Rejection | [DATA_NEEDED: input common-mode rejection] | — |
| Maximum Input Voltage | [DATA_NEEDED: maximum input voltage] | — |
| Halogen-Free Status | Compliant | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | unknown |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Available Gain Settings | — | 10 and 100 V/V |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 117 dB |
| Input Protection | — | ±40 V |
| Supply Range | — | ±18 V |
| Architecture | — | Three-op-amp instrumentation-amplifier design |
| Bandwidth at Gain 100 | — | 200 kHz |
| Package Pin Count | — | 8 pins |
| Low-Power Supply Current | — | [DATA_NEEDED: maximum quiescent current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |