AD8002ANZ vs AD842JN Comparison
Detailed side-by-side comparison of AD8002ANZ by Analog Devices and AD842JN by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | AD8002ANZ | AD842JN |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Current Feedback Amplifier | — |
| Number of Circuits | 2 circuits | — |
| Small-Signal Bandwidth at Gain +1 | 600 MHz (-3 dB) | — |
| Small-Signal Bandwidth at Gain +2 | 500 MHz (-3 dB) | — |
| Slew Rate | 1200 V/µs | [DATA_NEEDED: slew rate] |
| Settling Time to 0.1% | 16 ns | — |
| Maximum Power Dissipation | 50 mW | — |
| Maximum Supply Current | 5.0 mA per amplifier | — |
| Nominal Supply Voltage | ±5 V | — |
| Gain Flatness | 0.1 dB to 60 MHz at gain +2 with RL = 150 ohm | — |
| Differential Gain Error | 0.01% | — |
| Differential Phase Error | 0.02 degrees | — |
| Package | 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch | 14-pin PDIP |
| Mounting Type | Through-hole | Through-hole |
| Packaging | Tube | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | +/-5 V to +/-18 V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Noise Voltage | [DATA_NEEDED: input noise voltage] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Product Type | — | Single wideband precision operational amplifier |
| Gain-Bandwidth Product | — | 80 MHz |
| Minimum Stable Gain | — | 2 |
| Minimum Output Current Drive | — | 100 mA |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Process Technology | — | Junction-isolated complementary bipolar (CB) process |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |