AD8002ANZ vs AD842JN Comparaison
Comparaison détaillée côte à côte de AD8002ANZ par Analog Devices et AD842JN par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD8002ANZ | AD842JN |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Current Feedback Amplifier | — |
| Number of Circuits | 2 circuits | — |
| Small-Signal Bandwidth at Gain +1 | 600 MHz (-3 dB) | — |
| Small-Signal Bandwidth at Gain +2 | 500 MHz (-3 dB) | — |
| Slew Rate | 1200 V/µs | [DATA_NEEDED: slew rate] |
| Settling Time to 0.1% | 16 ns | — |
| Maximum Power Dissipation | 50 mW | — |
| Maximum Supply Current | 5.0 mA per amplifier | — |
| Nominal Supply Voltage | ±5 V | — |
| Gain Flatness | 0.1 dB to 60 MHz at gain +2 with RL = 150 ohm | — |
| Differential Gain Error | 0.01% | — |
| Differential Phase Error | 0.02 degrees | — |
| Boîtier | 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch | 14-pin PDIP |
| Type de montage | Through-hole | Through-hole |
| Packaging | Tube | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | +/-5 V to +/-18 V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Noise Voltage | [DATA_NEEDED: input noise voltage] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Product Type | — | Single wideband precision operational amplifier |
| Gain-Bandwidth Product | — | 80 MHz |
| Minimum Stable Gain | — | 2 |
| Minimum Output Current Drive | — | 100 mA |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Process Technology | — | Junction-isolated complementary bipolar (CB) process |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |