AD8002ANZ vs AD842JN 비교
다음의 상세 나란히 비교: AD8002ANZ 제조: Analog Devices 및 AD842JN 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD8002ANZ | AD842JN |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Current Feedback Amplifier | — |
| Number of Circuits | 2 circuits | — |
| Small-Signal Bandwidth at Gain +1 | 600 MHz (-3 dB) | — |
| Small-Signal Bandwidth at Gain +2 | 500 MHz (-3 dB) | — |
| Slew Rate | 1200 V/µs | [DATA_NEEDED: slew rate] |
| Settling Time to 0.1% | 16 ns | — |
| Maximum Power Dissipation | 50 mW | — |
| Maximum Supply Current | 5.0 mA per amplifier | — |
| Nominal Supply Voltage | ±5 V | — |
| Gain Flatness | 0.1 dB to 60 MHz at gain +2 with RL = 150 ohm | — |
| Differential Gain Error | 0.01% | — |
| Differential Phase Error | 0.02 degrees | — |
| 패키지 | 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch | 14-pin PDIP |
| 실장 유형 | Through-hole | Through-hole |
| Packaging | Tube | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | +/-5 V to +/-18 V |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Noise Voltage | [DATA_NEEDED: input noise voltage] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Product Type | — | Single wideband precision operational amplifier |
| Gain-Bandwidth Product | — | 80 MHz |
| Minimum Stable Gain | — | 2 |
| Minimum Output Current Drive | — | 100 mA |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | — | [DATA_NEEDED: power-supply rejection ratio] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Process Technology | — | Junction-isolated complementary bipolar (CB) process |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |