AD823ARZ vs NE5532PSR Comparison
Detailed side-by-side comparison of AD823ARZ by Analog Devices and NE5532PSR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
NE5532PSR - Dual 10 MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532PSR ✓ ActiveSpecification Comparison
| Parameter | AD823ARZ | NE5532PSR |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | J-FET | General-purpose operational amplifier |
| Number of Circuits | 2 | — |
| Output Type | Rail-to-Rail | — |
| Slew Rate | 25 V/µs | 9 V/µs typical |
| Gain Bandwidth Product | 16 MHz | — |
| Current - Input Bias | 10 pA | — |
| Voltage - Input Offset | 0.5 mV | — |
| Current - Supply | 2.6 mA (x2 channels) | — |
| Current - Output / Channel | 15 mA | — |
| Voltage - Supply, Single/Dual (±) | 3 V ~ 36 V, ±1.5 V ~ ±18 V | — |
| Operating Temperature | -40°C ~ +85°C | 0°C to 70°C |
| Package / Case | 8-SOIC | — |
| Mounting Type | Surface Mount | Surface mount |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Capacitive Load Drive | 500 pF, G = +1 | — |
| Number of Amplifier Circuits | — | 2 circuits |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V supply and 600 Ω load |
| Supply Voltage | — | 15 V |
| Input Bias Current | — | 1 µA |
| Package Type | — | 8-SO plastic package |
| Number of Pins | — | 8 pins |
| Supply Configuration | — | Dual supply supported; ±18 V test condition stated |
| Compensation | — | Internally compensated for unity gain |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |