AD823ARZ vs NE5532PSR तुलना
विस्तृत दोनों ओर की तुलना AD823ARZ द्वारा Analog Devices और NE5532PSR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
NE5532PSR - Dual 10 MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532PSR ✓ सक्रियविशेषता तुलना
| पैरामीटर | AD823ARZ | NE5532PSR |
|---|---|---|
| ब्रांड | Analog Devices | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Amplifier Type | J-FET | General-purpose operational amplifier |
| Number of Circuits | 2 | — |
| आउटपुट प्रकार | Rail-to-Rail | — |
| Slew Rate | 25 V/µs | 9 V/µs typical |
| Gain Bandwidth Product | 16 MHz | — |
| Current - Input Bias | 10 pA | — |
| Voltage - Input Offset | 0.5 mV | — |
| Current - Supply | 2.6 mA (x2 channels) | — |
| Current - Output / Channel | 15 mA | — |
| Voltage - Supply, Single/Dual (±) | 3 V ~ 36 V, ±1.5 V ~ ±18 V | — |
| ऑपरेटिंग तापमान | -40°C ~ +85°C | 0°C to 70°C |
| पैकेज / केस | 8-SOIC | — |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Capacitive Load Drive | 500 pF, G = +1 | — |
| Number of Amplifier Circuits | — | 2 circuits |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V supply and 600 Ω load |
| सप्लाई वोल्टेज | — | 15 V |
| Input Bias Current | — | 1 µA |
| Package Type | — | 8-SO plastic package |
| पिन की संख्या | — | 8 pins |
| Supply Configuration | — | Dual supply supported; ±18 V test condition stated |
| Compensation | — | Internally compensated for unity gain |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |