ADC12040CIVY vs ADC12DL040CIVS Comparison
Detailed side-by-side comparison of ADC12040CIVY by Texas Instruments and ADC12DL040CIVS by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments
ADC12040CIVY ✓ ActiveTexas Instruments
ADC12DL040CIVS - Dual 12-Bit 40 MSPS 3V ADC | Texas Instruments
ADC12DL040CIVS NrndSpecification Comparison
| Parameter | ADC12040CIVY | ADC12DL040CIVS |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | ADC/DAC | ADC/DAC |
| Lifecycle Status | Active | NRND |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $5.52 | $11.85 |
| Resolution | 12 bit | 12 Bits |
| Sampling Rate | 40 MSPS (min 40 MSPS over temperature) | — |
| Number of Channels | 1 input | 2 (dual, simultaneous sampling) |
| Architecture | Pipelined | Pipelined CMOS |
| Supply Voltage | +5V ±5% (single supply) | — |
| Power Consumption | 340 mW (typ) at 40 MHz | — |
| Differential Non-Linearity (DNL) | ±0.4 LSB (typ) | — |
| Signal-to-Noise Ratio (SNR) | 69 dB (typ) at fIN = 10 MHz | — |
| Effective Number of Bits (ENOB) | 11.2 bits (typ) at fIN = 10 MHz | — |
| Input Type | Differential (single-ended capable) | — |
| Reference Type | External, with internal buffer | — |
| Digital Output Interface | Parallel, CMOS, straight binary | — |
| Digital Output Logic Levels | 2.35V to 5V compatible | — |
| Power Down Mode | On-chip (low quiescent between conversions) | — |
| Operating Temperature Range | -40C to +85C (industrial) | — |
| Package | 32-LQFP (NEY) 7x7 mm | 64-pin TQFP (PAG) 10x10 mm, surface-mount |
| Mounting Type | Surface Mount | — |
| Pin Family Compatibility | Pin compatible with ADC12010, ADC12020, ADC12L063, ADC12L066 | — |
| RoHS Status | Compliant (NOPB suffix variants only; check exact suffix) | — |
| Sample Rate (per channel) | — | 40 MSPS |
| Analog Supply Voltage | — | 3.0 V (2.7 V to 3.6 V range) |
| Digital Output Driver Supply | — | 2.4 V to 3.6 V (separate DVDD) |
| Power Dissipation (typical) | — | 210 mW |
| Power-Down Mode | — | Yes |
| SNR (fIN = 10 MHz) | — | 69 dB (typical) |
| SFDR (fIN = 10 MHz) | — | 85 dB (typical) |
| DNL (Differential Non-Linearity) | — | ±0.3 LSB (typical) |
| INL (Integral Non-Linearity) | — | [DATA_NEEDED: INL spec] |
| Internal Reference | — | Yes (factory-trimmed, not user-adjustable) |
| Sample-and-Hold | — | Internal, dual |
| Duty Cycle Stabilizer | — | Yes |
| Multiplexed Output Mode | — | Yes (channels share single 12-bit bus) |
| Output Format | — | Straight Binary, offset binary, 2's complement (per pin strapping) |
| Input Clock | — | Single-ended or differential; 50 Ω terminated internally |
| Operating Temperature | — | -40 °C to +85 °C (industrial) |
| MSL (Moisture Sensitivity Level) | — | [DATA_NEEDED: MSL level] |
| Lead Finish / RoHS | — | Lead-free / RoHS status depends on orderable suffix (see datasheet ordering info) |