ADC12040CIVY vs ADC12DL040CIVS Comparação
Comparação detalhada lado a lado de ADC12040CIVY por Texas Instruments e ADC12DL040CIVS por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments
ADC12040CIVY ✓ AtivoTexas Instruments
ADC12DL040CIVS - Dual 12-Bit 40 MSPS 3V ADC | Texas Instruments
ADC12DL040CIVS NrndComparação de especificações
| Parâmetro | ADC12040CIVY | ADC12DL040CIVS |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | ADC/DAC | ADC/DAC |
| Status do ciclo de vida | Ativo | NRND |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $5,52 | $11,85 |
| Resolução | 12 bit | 12 Bits |
| Taxa de amostragem | 40 MSPS (min 40 MSPS over temperature) | — |
| Number of Channels | 1 input | 2 (dual, simultaneous sampling) |
| Architecture | Pipelined | Pipelined CMOS |
| Tensão de alimentação | +5V ±5% (single supply) | — |
| Power Consumption | 340 mW (typ) at 40 MHz | — |
| Differential Non-Linearity (DNL) | ±0.4 LSB (typ) | — |
| Signal-to-Noise Ratio (SNR) | 69 dB (typ) at fIN = 10 MHz | — |
| Effective Number of Bits (ENOB) | 11.2 bits (typ) at fIN = 10 MHz | — |
| Input Type | Differential (single-ended capable) | — |
| Reference Type | External, with internal buffer | — |
| Digital Output Interface | Parallel, CMOS, straight binary | — |
| Digital Output Logic Levels | 2.35V to 5V compatible | — |
| Power Down Mode | On-chip (low quiescent between conversions) | — |
| Faixa de temperatura de operação | -40C to +85C (industrial) | — |
| Encapsulamento | 32-LQFP (NEY) 7x7 mm | 64-pin TQFP (PAG) 10x10 mm, surface-mount |
| Tipo de montagem | Surface Mount | — |
| Pin Family Compatibility | Pin compatible with ADC12010, ADC12020, ADC12L063, ADC12L066 | — |
| Status RoHS | Compliant (NOPB suffix variants only; check exact suffix) | — |
| Sample Rate (per channel) | — | 40 MSPS |
| Analog Supply Voltage | — | 3.0 V (2.7 V to 3.6 V range) |
| Digital Output Driver Supply | — | 2.4 V to 3.6 V (separate DVDD) |
| Power Dissipation (typical) | — | 210 mW |
| Power-Down Mode | — | Yes |
| SNR (fIN = 10 MHz) | — | 69 dB (typical) |
| SFDR (fIN = 10 MHz) | — | 85 dB (typical) |
| DNL (Differential Non-Linearity) | — | ±0.3 LSB (typical) |
| INL (Integral Non-Linearity) | — | [DATA_NEEDED: INL spec] |
| Internal Reference | — | Yes (factory-trimmed, not user-adjustable) |
| Sample-and-Hold | — | Internal, dual |
| Duty Cycle Stabilizer | — | Yes |
| Multiplexed Output Mode | — | Yes (channels share single 12-bit bus) |
| Output Format | — | Straight Binary, offset binary, 2's complement (per pin strapping) |
| Input Clock | — | Single-ended or differential; 50 Ω terminated internally |
| Temperatura de operação | — | -40 °C to +85 °C (industrial) |
| MSL (Moisture Sensitivity Level) | — | [DATA_NEEDED: MSL level] |
| Lead Finish / RoHS | — | Lead-free / RoHS status depends on orderable suffix (see datasheet ordering info) |