ADC12DL040CIVS vs ADC12DL040CIVSX Comparison
Detailed side-by-side comparison of ADC12DL040CIVS by Texas Instruments and ADC12DL040CIVSX by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
ADC12DL040CIVS - Dual 12-Bit 40 MSPS 3V ADC | Texas Instruments
ADC12DL040CIVS NrndTexas Instruments
ADC12DL040CIVSX - Dual 12-Bit 40 MSPS ADC | Texas Instruments
ADC12DL040CIVSX ✓ ActiveSpecification Comparison
| Parameter | ADC12DL040CIVS | ADC12DL040CIVSX |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | ADC/DAC | ADC/DAC |
| Lifecycle Status | NRND | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $11.85 | $16.95 |
| Resolution | 12 Bits | 12 bit |
| Number of Channels | 2 (dual, simultaneous sampling) | 2 (Dual) |
| Sample Rate (per channel) | 40 MSPS | — |
| Architecture | Pipelined CMOS | Pipelined CMOS |
| Analog Supply Voltage | 3.0 V (2.7 V to 3.6 V range) | 3 V (single supply) |
| Digital Output Driver Supply | 2.4 V to 3.6 V (separate DVDD) | — |
| Power Dissipation (typical) | 210 mW | — |
| Power-Down Mode | Yes | — |
| SNR (fIN = 10 MHz) | 69 dB (typical) | — |
| SFDR (fIN = 10 MHz) | 85 dB (typical) | — |
| DNL (Differential Non-Linearity) | ±0.3 LSB (typical) | — |
| INL (Integral Non-Linearity) | [DATA_NEEDED: INL spec] | — |
| Internal Reference | Yes (factory-trimmed, not user-adjustable) | — |
| Sample-and-Hold | Internal, dual | Yes (integrated, per channel) |
| Duty Cycle Stabilizer | Yes | — |
| Multiplexed Output Mode | Yes (channels share single 12-bit bus) | — |
| Output Format | Straight Binary, offset binary, 2's complement (per pin strapping) | — |
| Input Clock | Single-ended or differential; 50 Ω terminated internally | — |
| Operating Temperature | -40 °C to +85 °C (industrial) | — |
| Package | 64-pin TQFP (PAG) 10x10 mm, surface-mount | — |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Lead Finish / RoHS | Lead-free / RoHS status depends on orderable suffix (see datasheet ordering info) | — |
| Sampling Rate (per channel) | — | 40 MSPS |
| Input Voltage Range | — | 0.0 V to 2.6 V (analog input) |
| Power Dissipation | — | 210 mW (typical, 3V, 40 MSPS) |
| Power Consumption per Channel | — | 105 mW (typical) |
| Data Interface | — | Parallel CMOS |
| Digital Output Format | — | [DATA_NEEDED: digital output format/code] |
| Reference Type | — | Internal (on-chip reference) |
| Operating Temperature Range | — | -40C to +85C (Industrial) |
| Package / Case | — | 64-TQFP (PAG) 10x10 mm |
| Mounting Type | — | Surface Mount |
| MSL Level | — | [DATA_NEEDED: MSL level] |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL bits LSB] |
| Integral Nonlinearity (INL) | — | [DATA_NEEDED: INL bits LSB] |
| Signal-to-Noise Ratio (SNR) | — | [DATA_NEEDED: SNR dB at 40 MSPS] |
| RoHS Status | — | Compliant |
| Lead-Free | — | Yes |