ADC12DL040CIVS vs ADC12DL040CIVSX Vergleich
Detaillierter Direktvergleich von ADC12DL040CIVS von Texas Instruments und ADC12DL040CIVSX von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ADC12DL040CIVS - Dual 12-Bit 40 MSPS 3V ADC | Texas Instruments
ADC12DL040CIVS NrndTexas Instruments
ADC12DL040CIVSX - Dual 12-Bit 40 MSPS ADC | Texas Instruments
ADC12DL040CIVSX ✓ AktivSpezifikationsvergleich
| Parameter | ADC12DL040CIVS | ADC12DL040CIVSX |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | NRND | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $11,85 | $16,95 |
| Auflösung | 12 Bits | 12 bit |
| Number of Channels | 2 (dual, simultaneous sampling) | 2 (Dual) |
| Sample Rate (per channel) | 40 MSPS | — |
| Architecture | Pipelined CMOS | Pipelined CMOS |
| Analog Supply Voltage | 3.0 V (2.7 V to 3.6 V range) | 3 V (single supply) |
| Digital Output Driver Supply | 2.4 V to 3.6 V (separate DVDD) | — |
| Power Dissipation (typical) | 210 mW | — |
| Power-Down Mode | Yes | — |
| SNR (fIN = 10 MHz) | 69 dB (typical) | — |
| SFDR (fIN = 10 MHz) | 85 dB (typical) | — |
| DNL (Differential Non-Linearity) | ±0.3 LSB (typical) | — |
| INL (Integral Non-Linearity) | [DATA_NEEDED: INL spec] | — |
| Internal Reference | Yes (factory-trimmed, not user-adjustable) | — |
| Sample-and-Hold | Internal, dual | Yes (integrated, per channel) |
| Duty Cycle Stabilizer | Yes | — |
| Multiplexed Output Mode | Yes (channels share single 12-bit bus) | — |
| Output Format | Straight Binary, offset binary, 2's complement (per pin strapping) | — |
| Input Clock | Single-ended or differential; 50 Ω terminated internally | — |
| Betriebstemperatur | -40 °C to +85 °C (industrial) | — |
| Gehäuse | 64-pin TQFP (PAG) 10x10 mm, surface-mount | — |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Lead Finish / RoHS | Lead-free / RoHS status depends on orderable suffix (see datasheet ordering info) | — |
| Sampling Rate (per channel) | — | 40 MSPS |
| Eingangsspannungsbereich | — | 0.0 V to 2.6 V (analog input) |
| Power Dissipation | — | 210 mW (typical, 3V, 40 MSPS) |
| Power Consumption per Channel | — | 105 mW (typical) |
| Data Interface | — | Parallel CMOS |
| Digital Output Format | — | [DATA_NEEDED: digital output format/code] |
| Reference Type | — | Internal (on-chip reference) |
| Betriebstemperaturbereich | — | -40C to +85C (Industrial) |
| Gehäuse / Bauform | — | 64-TQFP (PAG) 10x10 mm |
| Montageart | — | Surface Mount |
| MSL-Level | — | [DATA_NEEDED: MSL level] |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL bits LSB] |
| Integral Nonlinearity (INL) | — | [DATA_NEEDED: INL bits LSB] |
| Signal-to-Noise Ratio (SNR) | — | [DATA_NEEDED: SNR dB at 40 MSPS] |
| RoHS-Status | — | Compliant |
| Lead-Free | — | Yes |