ADM3064EARZ vs ADM3063EARZ Comparison
Detailed side-by-side comparison of ADM3064EARZ by Analog Devices and ADM3063EARZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
ADM3064EARZ - 500 kbps ESD-Protected RS-485 Transceiver | Analog Devices
ADM3064EARZ ✓ ActiveSpecification Comparison
| Parameter | ADM3064EARZ | ADM3063EARZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Transceiver Configuration | 1/1 transceiver | — |
| Interface Standard | EIA-485 RS-485 | TIA/EIA RS-485 |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Supply Voltage Range | 3.0 V to 5.5 V | — |
| Nominal Signaling Rate | 500 kbps | — |
| High-Speed Mode | 50 Mbps | — |
| ESD Protection | ±12 kV IEC ESD protected | — |
| Maximum Transmit Delay | 800 ns | — |
| Operating Temperature Range | -40 °C to +85 °C | -40°C to +85°C or -40°C to +125°C, model-dependent |
| Package | 14-lead SOIC, 0.154 inch (3.90 mm) width | 14-lead SOIC_N |
| Mounting Type | Surface mount | Surface mount |
| Shipping Package | Tube | — |
| Terminal Count | 14 terminals | — |
| RoHS Status | Compliant | RoHS3 compliant |
| Evaluation Board Footprint | Standard 14-lead SOIC footprint | — |
| Power-Supply Current | [DATA_NEEDED: power-supply current] | — |
| Receiver Fail-Safe Behavior | [DATA_NEEDED: receiver fail-safe behavior] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Product Type | — | Full-duplex RS-485 transceiver |
| Data Rate | — | 500 kbps |
| VCC Operating Voltage Range | — | 3.0 V to 5.5 V |
| VIO Operating Voltage Range | — | 1.62 V to 5.5 V |
| Bus Configuration | — | Full duplex |
| ESD Contact Discharge Protection | — | At least ±12 kV per IEC 61000-4-2 |
| ESD Air Discharge Protection | — | At least ±12 kV per IEC 61000-4-2 |
| HBM ESD Protection | — | At least ±30 kV |
| Moisture Sensitivity Level | — | MSL 1 |
| REACH Status | — | Unaffected |
| Lifecycle Recommendation | — | Recommended for new designs |
| Hot-Swap Behavior | — | Glitch-free power-up and power-down |
| Number of Bus Pins | — | 4 bus pins |
| Number of Leads | — | 14 leads |