ADM3064EARZ vs ADM3063EARZ Vergleich
Detaillierter Direktvergleich von ADM3064EARZ von Analog Devices und ADM3063EARZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM3064EARZ - 500 kbps ESD-Protected RS-485 Transceiver | Analog Devices
ADM3064EARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM3064EARZ | ADM3063EARZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Transceiver Configuration | 1/1 transceiver | — |
| Interface Standard | EIA-485 RS-485 | TIA/EIA RS-485 |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Supply Voltage Range | 3.0 V to 5.5 V | — |
| Nominal Signaling Rate | 500 kbps | — |
| High-Speed Mode | 50 Mbps | — |
| ESD Protection | ±12 kV IEC ESD protected | — |
| Maximum Transmit Delay | 800 ns | — |
| Betriebstemperaturbereich | -40 °C to +85 °C | -40°C to +85°C or -40°C to +125°C, model-dependent |
| Gehäuse | 14-lead SOIC, 0.154 inch (3.90 mm) width | 14-lead SOIC_N |
| Montageart | Surface mount | Surface mount |
| Shipping Package | Tube | — |
| Terminal Count | 14 terminals | — |
| RoHS-Status | Compliant | RoHS3 compliant |
| Evaluation Board Footprint | Standard 14-lead SOIC footprint | — |
| Power-Supply Current | [DATA_NEEDED: power-supply current] | — |
| Receiver Fail-Safe Behavior | [DATA_NEEDED: receiver fail-safe behavior] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Product Type | — | Full-duplex RS-485 transceiver |
| Datenrate | — | 500 kbps |
| VCC Operating Voltage Range | — | 3.0 V to 5.5 V |
| VIO Operating Voltage Range | — | 1.62 V to 5.5 V |
| Bus Configuration | — | Full duplex |
| ESD Contact Discharge Protection | — | At least ±12 kV per IEC 61000-4-2 |
| ESD Air Discharge Protection | — | At least ±12 kV per IEC 61000-4-2 |
| HBM ESD Protection | — | At least ±30 kV |
| Moisture Sensitivity Level | — | MSL 1 |
| REACH Status | — | Unaffected |
| Lifecycle Recommendation | — | Recommended for new designs |
| Hot-Swap Behavior | — | Glitch-free power-up and power-down |
| Number of Bus Pins | — | 4 bus pins |
| Number of Leads | — | 14 leads |