ADM3064EARZ vs ADM3063EARZ So sánh

So sánh chi tiết song song của ADM3064EARZ bằng Analog Devices và ADM3063EARZ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ADM3064EARZ ADM3064EARZ - 500 kbps ESD-Protected RS-485 Transceiver | Analog Devices

ADM3064EARZ - 500 kbps ESD-Protected RS-485 Transceiver | Analog Devices

ADM3064EARZ ✓ Hoạt động
Analog Devices
ADM3063EARZ ADM3063EARZ - 500kbps Full-Duplex RS-485 | Analog Devices

ADM3063EARZ - 500kbps Full-Duplex RS-485 | Analog Devices

ADM3063EARZ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ADM3064EARZ ADM3063EARZ
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Transceiver Configuration 1/1 transceiver —
Interface Standard EIA-485 RS-485 TIA/EIA RS-485
Driver and Receiver Count 1 driver and 1 receiver —
Supply Voltage Range 3.0 V to 5.5 V —
Nominal Signaling Rate 500 kbps —
High-Speed Mode 50 Mbps —
ESD Protection ±12 kV IEC ESD protected —
Maximum Transmit Delay 800 ns —
Khoảng nhiệt độ hoạt động -40 °C to +85 °C -40°C to +85°C or -40°C to +125°C, model-dependent
Hộp 14-lead SOIC, 0.154 inch (3.90 mm) width 14-lead SOIC_N
Kiểu lắp đặt Surface mount Surface mount
Shipping Package Tube —
Terminal Count 14 terminals —
Trạng thái RoHS Compliant RoHS3 compliant
Evaluation Board Footprint Standard 14-lead SOIC footprint —
Power-Supply Current [DATA_NEEDED: power-supply current] —
Receiver Fail-Safe Behavior [DATA_NEEDED: receiver fail-safe behavior] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Propagation Delay [DATA_NEEDED: receiver propagation delay] —
Product Type — Full-duplex RS-485 transceiver
Tốc độ dữ liệu — 500 kbps
VCC Operating Voltage Range — 3.0 V to 5.5 V
VIO Operating Voltage Range — 1.62 V to 5.5 V
Bus Configuration — Full duplex
ESD Contact Discharge Protection — At least ±12 kV per IEC 61000-4-2
ESD Air Discharge Protection — At least ±12 kV per IEC 61000-4-2
HBM ESD Protection — At least ±30 kV
Moisture Sensitivity Level — MSL 1
REACH Status — Unaffected
Lifecycle Recommendation — Recommended for new designs
Hot-Swap Behavior — Glitch-free power-up and power-down
Number of Bus Pins — 4 bus pins
Number of Leads — 14 leads

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá