ATMEGA329PV-10MN vs ATMEGA329P-20AU Comparison

Detailed side-by-side comparison of ATMEGA329PV-10MN by Microchip Technology and ATMEGA329P-20AU by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Microchip Technology
ATMEGA329PV-10MN ATMEGA329PV-10MN - 8-bit AVR MCU 32KB Flash 10MHz 64-QFN | Microchip

ATMEGA329PV-10MN - 8-bit AVR MCU 32KB Flash 10MHz 64-QFN | Microchip

ATMEGA329PV-10MN βœ“ Active
Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU βœ“ Active

Specification Comparison

Parameter ATMEGA329PV-10MN ATMEGA329P-20AU
Brand Microchip Technology Microchip Technology
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
Stock Status In Stock In Stock
Unit Price (USD) $4.29 $4.71
Core Architecture AVR 8-bit RISC AVR (8-bit RISC, Harvard)
Program Memory (Flash) 32 KB 32 KB (16K x 16), In-System Programmable with RWW
SRAM 2 KB 2 KB (2K x 8)
EEPROM 1 KB 1 KB
Maximum Clock Frequency 10 MHz β€”
Throughput 10 MIPS at 10 MHz Up to 20 MIPS at 20 MHz
Operating Voltage (Vcc) 1.8 V to 5.5 V β€”
I/O Pins 54 β€”
Package / Case 64-QFN (9x9 mm) β€”
Mounting Type Surface Mount Surface Mount
Operating Temperature -40C to +105C -40C to +85C (industrial, -A suffix)
ADC 10-bit, 8 channels 10-bit, up to 8 single-ended channels
LCD Controller Integrated segment LCD, up to 4x40 segments β€”
Timers 1x 16-bit, 2x 8-bit β€”
Communication Interfaces 2x USART, 1x SPI, 1x TWI (I2C) β€”
Watchdog Timer Yes, programmable with on-chip oscillator β€”
Power-Save Modes 6 sleep modes (pico-power variants) Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower)
RoHS Status Compliant Compliant (Pb-free / Green)
Instruction Set β€” 131 instructions, mostly single-cycle
Maximum Clock Speed β€” 20 MHz
Supply Voltage (Vcc) β€” 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V)
General-Purpose I/O Pins β€” 54
General-Purpose Working Registers β€” 32
PWM Channels β€” 6
Communication Peripherals β€” 2x USART, 1x TWI (I2C), 1x SPI (also ISP)
Debug Interface β€” JTAG (IEEE 1149.1 compliant)
Package β€” 64-pin TQFP (14x14 mm, 0.8 mm pitch)
QTouch Support β€” Yes (peripheral touch controller via library)

Datasheets & Resources

Browse All Products Create BOM Request Quote