ATMEGA329PV-10MN vs ATMEGA329P-20AU Comparaison

Comparaison détaillée côte à côte de ATMEGA329PV-10MN par Microchip Technology et ATMEGA329P-20AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA329PV-10MN ATMEGA329PV-10MN - 8-bit AVR MCU 32KB Flash 10MHz 64-QFN | Microchip

ATMEGA329PV-10MN - 8-bit AVR MCU 32KB Flash 10MHz 64-QFN | Microchip

ATMEGA329PV-10MN ✓ Actif
Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA329PV-10MN ATMEGA329P-20AU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $4,29 $4,71
Core Architecture AVR 8-bit RISC AVR (8-bit RISC, Harvard)
Program Memory (Flash) 32 KB 32 KB (16K x 16), In-System Programmable with RWW
SRAM 2 KB 2 KB (2K x 8)
EEPROM 1 KB 1 KB
Fréquence d'horloge maximale 10 MHz —
Throughput 10 MIPS at 10 MHz Up to 20 MIPS at 20 MHz
Operating Voltage (Vcc) 1.8 V to 5.5 V —
I/O Pins 54 —
Boîtier / Format 64-QFN (9x9 mm) —
Type de montage Surface Mount Surface Mount
Température de fonctionnement -40C to +105C -40C to +85C (industrial, -A suffix)
ADC 10-bit, 8 channels 10-bit, up to 8 single-ended channels
LCD Controller Integrated segment LCD, up to 4x40 segments —
Timers 1x 16-bit, 2x 8-bit —
Communication Interfaces 2x USART, 1x SPI, 1x TWI (I2C) —
Watchdog Timer Yes, programmable with on-chip oscillator —
Power-Save Modes 6 sleep modes (pico-power variants) Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower)
Statut RoHS Compliant Compliant (Pb-free / Green)
Instruction Set — 131 instructions, mostly single-cycle
Maximum Clock Speed — 20 MHz
Supply Voltage (Vcc) — 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V)
General-Purpose I/O Pins — 54
General-Purpose Working Registers — 32
PWM Channels — 6
Communication Peripherals — 2x USART, 1x TWI (I2C), 1x SPI (also ISP)
Debug Interface — JTAG (IEEE 1149.1 compliant)
Boîtier — 64-pin TQFP (14x14 mm, 0.8 mm pitch)
QTouch Support — Yes (peripheral touch controller via library)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis