ATMEGA329PV-10MN vs ATMEGA329P-20AU Vergleich
Detaillierter Direktvergleich von ATMEGA329PV-10MN von Microchip Technology und ATMEGA329P-20AU von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
ATMEGA329PV-10MN - 8-bit AVR MCU 32KB Flash 10MHz 64-QFN | Microchip
ATMEGA329PV-10MN ✓ AktivMicrochip Technology
ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64
ATMEGA329P-20AU ✓ AktivSpezifikationsvergleich
| Parameter | ATMEGA329PV-10MN | ATMEGA329P-20AU |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,29 | $4,71 |
| Core Architecture | AVR 8-bit RISC | AVR (8-bit RISC, Harvard) |
| Program Memory (Flash) | 32 KB | 32 KB (16K x 16), In-System Programmable with RWW |
| SRAM | 2 KB | 2 KB (2K x 8) |
| EEPROM | 1 KB | 1 KB |
| Maximale Taktfrequenz | 10 MHz | — |
| Throughput | 10 MIPS at 10 MHz | Up to 20 MIPS at 20 MHz |
| Operating Voltage (Vcc) | 1.8 V to 5.5 V | — |
| I/O Pins | 54 | — |
| Gehäuse / Bauform | 64-QFN (9x9 mm) | — |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40C to +105C | -40C to +85C (industrial, -A suffix) |
| ADC | 10-bit, 8 channels | 10-bit, up to 8 single-ended channels |
| LCD Controller | Integrated segment LCD, up to 4x40 segments | — |
| Timers | 1x 16-bit, 2x 8-bit | — |
| Communication Interfaces | 2x USART, 1x SPI, 1x TWI (I2C) | — |
| Watchdog Timer | Yes, programmable with on-chip oscillator | — |
| Power-Save Modes | 6 sleep modes (pico-power variants) | Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower) |
| RoHS-Status | Compliant | Compliant (Pb-free / Green) |
| Instruction Set | — | 131 instructions, mostly single-cycle |
| Maximum Clock Speed | — | 20 MHz |
| Supply Voltage (Vcc) | — | 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V) |
| General-Purpose I/O Pins | — | 54 |
| General-Purpose Working Registers | — | 32 |
| PWM Channels | — | 6 |
| Communication Peripherals | — | 2x USART, 1x TWI (I2C), 1x SPI (also ISP) |
| Debug Interface | — | JTAG (IEEE 1149.1 compliant) |
| Gehäuse | — | 64-pin TQFP (14x14 mm, 0.8 mm pitch) |
| QTouch Support | — | Yes (peripheral touch controller via library) |