ATSAMD21E17A-AU vs ATSAMD21E15B-AU Comparison

Detailed side-by-side comparison of ATSAMD21E17A-AU by Microchip Technology and ATSAMD21E15B-AU by Microchip Technology. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Microchip Technology
ATSAMD21E17A-AU ATSAMD21E17A-AU - ARM Cortex-M0+ 48MHz 128KB MCU 32-TQFP | Microchip

ATSAMD21E17A-AU - ARM Cortex-M0+ 48MHz 128KB MCU 32-TQFP | Microchip

ATSAMD21E17A-AU ✓ Active
Microchip Technology
ATSAMD21E15B-AU ATSAMD21E15B-AU - 32KB Flash ARM Cortex-M0+ MCU | Microchip

ATSAMD21E15B-AU - 32KB Flash ARM Cortex-M0+ MCU | Microchip

ATSAMD21E15B-AU ✓ Active

Specification Comparison

Parameter ATSAMD21E17A-AU ATSAMD21E15B-AU
Brand Microchip Technology Microchip Technology
Category Microcontrollers Microcontrollers
Lifecycle Status Active Active
Core Architecture ARM Cortex-M0+ (SAM D21E family) —
CPU Bit Width 32-bit —
Maximum CPU Frequency 48 MHz —
CoreMark/MHz 2.46 —
Program Flash Memory 128 KB (128K x 8) —
RWW (Read-While-Write) Flash Section 4 KB —
SRAM 16 KB 4 KB
Operating Voltage Range (VDDIN) 1.62 V to 3.63 V —
USB Interface USB 2.0 Full-Speed (12 Mbps) with on-chip transceiver —
SERCOM Channels 6 (configurable as UART/SPI/I2C) —
Timer/Counters Three 16-bit TC, one 32-bit TCC, one 24-bit RTC —
ADC 12-bit, up to 350 ksps, up to 20 channels 12-bit, 20 channels
DAC 10-bit, 1 channel 10-bit, 1 channel
DMA Controller 12 channels —
Package 32-pin TQFP (7x7 mm), 0.8 mm pitch 32-pin TQFP
Operating Temperature Range -40 C to +85 C (industrial) —
Mounting Type Surface Mount —
MSL Level 3 (per JEDEC J-STD-020) —
RoHS Status Compliant Compliant
Functional Safety (FuSa) SAM D21E family supports FuSa variants —
Core — ARM Cortex-M0+ (32-bit)
Maximum Clock Frequency — 48 MHz
Flash Memory — 32 KB
Supply Voltage — 1.62 V to 3.6 V (3.3 V nominal)
Operating Temperature — -40 °C to +85 °C (industrial)
GPIO Count — Up to 26
SERCOM — 6 configurable (UART/SPI/I²C)
Timers/Counters — TC x6, TCC x2
Analog Comparators — 2
RTC — Yes (32.768 kHz)
Programming Interface — Serial Wire Debug (SWD)

Datasheets & Resources

Browse All Products Create BOM Request Quote