BTM9020EPXUMA1 vs TLE94104EPXUMA1 Comparison
Detailed side-by-side comparison of BTM9020EPXUMA1 by Infineon and TLE94104EPXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTM9020EPXUMA1 | TLE94104EPXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Topology | Full-bridge (H-bridge) | Quad Half-Bridge (4x N-channel high-side + low-side MOSFETs integrated) |
| Motor Type | Brushed DC (BDC) | — |
| Supply Voltage Range (Nominal) | 7 V to 18 V | — |
| Supply Voltage Range (Extended) | 4.5 V to 40 V | — |
| Typical Path Resistance | 84 mΩ at 25 °C | — |
| Current Limit (Minimum) | 20 A | — |
| Pulse Current (tpulse ≤ 1 s) | 8.8 A at 85 °C | — |
| Pulse Current (tpulse ≤ 10 s) | 6.9 A at 85 °C | — |
| PWM Frequency | 20 kHz | — |
| Package | PG-TSDSO-14 | PG-TSDSO-14 (14-pin with exposed pad) |
| AEC-Q100 Qualification | Qualified | — |
| Operating Temperature | -40 °C to +150 °C (junction) | — |
| Logic Input Compatibility | 3.3 V / 5 V TTL | — |
| Protection Features | Overcurrent, Overtemperature, Undervoltage | Over-Temperature, Over-Current, Short-Circuit, Open-Load Detection |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Status | Compliant | Compliant |
| Charge Pump | Integrated | — |
| Family | MOTIX BTM9020EP / BTM9021EP | — |
| Product Type | — | Half-Bridge (4) Driver for DC Motors |
| Logic Supply Voltage (VCC) | — | 3 V to 5.5 V |
| Motor Supply Voltage (VS) | — | 5.5 V to 20 V |
| Output Configuration | — | Half-Bridge (4) - parallelable to 2x H-Bridge |
| Interface | — | 16-bit SPI, daisy-chain capable |
| Operating Junction Temperature | — | -40 C to +150 C |
| MSL Level | — | 2A |
| Number of Outputs | — | 4 half-bridge channels |
| Automotive Qualification | — | AEC-Q100 grade-0 capable (Tj = 150 C) |
| Slew Rate Control | — | Configurable via SPI |