BTS3028SDRATMA1 vs BTS3125TFATMA1 Comparison
Detailed side-by-side comparison of BTS3028SDRATMA1 by Infineon and BTS3125TFATMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS3028SDRATMA1 | BTS3125TFATMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Smart Low-Side Power Switch | Single-channel N-channel low-side smart power switch |
| Topology | 1:1 N-Channel, single channel | — |
| Output Current (Max) | 5 A | — |
| On-Resistance RDS(ON) | 28 mΩ (typ.) | — |
| Load Voltage (max) | 60 V (load-dump rated) | — |
| Operating Supply Voltage | 5 V to 28 V (typ. 13.5 V) | — |
| Logic Input Voltage (IN) | Logic-level, 3.3 V/5 V compatible | — |
| Package | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) | PG-TO252-3-313 (DPAK, SC-63) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40 °C to +150 °C (junction) | — |
| Protection Features | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss | — |
| Status Output | Open-drain diagnostic flag | — |
| Automotive Qualification | AEC-Q100 | — |
| RoHS Status | Compliant | Compliant |
| MSL Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL moisture sensitivity level] |
| Load Current (continuous) | — | 2 A |
| Load Current (pulsed) | — | [DATA_NEEDED: pulsed drain current limit] |
| RDS(on) typical | — | 250 mΩ at 5 V Vbb |
| Supply Voltage (Vbb, nominal) | — | 5 V |
| Supply Voltage (Vbb, operating) | — | 5 V to 28 V |
| Load Dump Transient Protection | — | 40 V |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| On-State Resistance (max) | — | [DATA_NEEDED: maximum RDS(on) over temp] |
| Thermal Resistance, Junction-to-Ambient | — | [DATA_NEEDED: theta_JA value] |
| Operating Temperature Range | — | -40°C to +150°C |
| Over-temperature Shutdown | — | ~150°C with auto-restart |
| Short-Circuit Protection | — | Yes, current-limited |
| Over-voltage Protection | — | Yes (clamping at 40 V) |
| ESD Protection | — | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) |
| Status Flag Output | — | Yes (fault feedback) |