BTS3028SDRATMA1 vs BTS3125TFATMA1 비교
다음의 상세 나란히 비교: BTS3028SDRATMA1 제조: Infineon 및 BTS3125TFATMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS3028SDRATMA1 | BTS3125TFATMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.92 | $0.54 |
| Product Type | Smart Low-Side Power Switch | Single-channel N-channel low-side smart power switch |
| 토폴로지 | 1:1 N-Channel, single channel | — |
| 출력 전류 (최대) | 5 A | — |
| On-Resistance RDS(ON) | 28 mΩ (typ.) | — |
| Load Voltage (max) | 60 V (load-dump rated) | — |
| 동작 공급 전압 | 5 V to 28 V (typ. 13.5 V) | — |
| Logic Input Voltage (IN) | Logic-level, 3.3 V/5 V compatible | — |
| 패키지 | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) | PG-TO252-3-313 (DPAK, SC-63) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 | -40 °C to +150 °C (junction) | — |
| Protection Features | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss | — |
| Status Output | Open-drain diagnostic flag | — |
| Automotive Qualification | AEC-Q100 | — |
| RoHS 상태 | Compliant | Compliant |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL moisture sensitivity level] |
| Load Current (continuous) | — | 2 A |
| Load Current (pulsed) | — | [DATA_NEEDED: pulsed drain current limit] |
| RDS(on) typical | — | 250 mΩ at 5 V Vbb |
| Supply Voltage (Vbb, nominal) | — | 5 V |
| Supply Voltage (Vbb, operating) | — | 5 V to 28 V |
| Load Dump Transient Protection | — | 40 V |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| On-State Resistance (max) | — | [DATA_NEEDED: maximum RDS(on) over temp] |
| 열 저항, 접합-주변 | — | [DATA_NEEDED: theta_JA value] |
| 동작 온도 범위 | — | -40°C to +150°C |
| Over-temperature Shutdown | — | ~150°C with auto-restart |
| Short-Circuit Protection | — | Yes, current-limited |
| Over-voltage Protection | — | Yes (clamping at 40 V) |
| ESD Protection | — | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) |
| Status Flag Output | — | Yes (fault feedback) |