BTS428L2 vs BTS500151TADATMA2 Comparison
Detailed side-by-side comparison of BTS428L2 by Infineon and BTS500151TADATMA2 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTS500151TADATMA2 - 33A High-Side N-Channel Power Switch | Infineon
BTS500151TADATMA2 ✓ ActiveSpecification Comparison
| Parameter | BTS428L2 | BTS500151TADATMA2 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.82 | $3.21 |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | — |
| Topology | Single-channel high-side N-channel MOSFET with charge pump | — |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | [DATA_NEEDED: RDS(on) at 25C and Tj=150C] |
| Number of Channels | 1 | — |
| Status Feedback | Yes (dedicated status pin) | — |
| Overcurrent Protection | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | — |
| Overvoltage Protection | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | — |
| Operating Temperature Range | -40 °C to +150 °C | -40C to +150C (junction) |
| Package | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | PG-TO-263-7-10 (D2PAK, 6 leads + tab) |
| Mounting Type | Surface Mount | Surface Mount |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | — |
| Switch Type | — | High-Side Power Switch (PROFET+ 12V / HIC-PROFET) |
| Number of Outputs | — | 1 |
| Internal MOSFET Configuration | — | N-Channel |
| Continuous Load Current | — | 33 A |
| Output Peak Current Limit | — | 39 A (typ) |
| Input Voltage Range (Vbb) | — | -0.3 V to 28 V (operating typically 5 V to 18 V) |
| Protection Features | — | Over-current, Over-temperature, Over-voltage, Reverse Battery, Ground Loss, Open-Load detection |
| Diagnostic Output | — | Yes (Status pin) |
| MSL Level | — | [DATA_NEEDED: MSL rating] |
| RoHS Status | — | Compliant |
| Automotive Qualification | — | AEC-Q100 qualified |
| Number of Pins | — | 7 (6 + tab) |