BTS428L2 vs BTS500151TADATMA2 Vergleich
Detaillierter Direktvergleich von BTS428L2 von Infineon und BTS500151TADATMA2 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS500151TADATMA2 - 33A High-Side N-Channel Power Switch | Infineon
BTS500151TADATMA2 ✓ AktivSpezifikationsvergleich
| Parameter | BTS428L2 | BTS500151TADATMA2 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,82 | $3,21 |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | — |
| Topologie | Single-channel high-side N-channel MOSFET with charge pump | — |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | [DATA_NEEDED: RDS(on) at 25C and Tj=150C] |
| Number of Channels | 1 | — |
| Status Feedback | Yes (dedicated status pin) | — |
| Überstromschutz | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | — |
| Overvoltage Protection | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | — |
| Betriebstemperaturbereich | -40 °C to +150 °C | -40C to +150C (junction) |
| Gehäuse | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | PG-TO-263-7-10 (D2PAK, 6 leads + tab) |
| Montageart | Surface Mount | Surface Mount |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | — |
| Switch Type | — | High-Side Power Switch (PROFET+ 12V / HIC-PROFET) |
| Anzahl der Ausgänge | — | 1 |
| Internal MOSFET Configuration | — | N-Channel |
| Continuous Load Current | — | 33 A |
| Output Peak Current Limit | — | 39 A (typ) |
| Input Voltage Range (Vbb) | — | -0.3 V to 28 V (operating typically 5 V to 18 V) |
| Protection Features | — | Over-current, Over-temperature, Over-voltage, Reverse Battery, Ground Loss, Open-Load detection |
| Diagnostic Output | — | Yes (Status pin) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |
| RoHS-Status | — | Compliant |
| Automotive Qualification | — | AEC-Q100 qualified |
| Anzahl der Pins | — | 7 (6 + tab) |