BTS428L2 vs BTS500151TADATMA2 Comparaison
Comparaison détaillée côte à côte de BTS428L2 par Infineon et BTS500151TADATMA2 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS500151TADATMA2 - 33A High-Side N-Channel Power Switch | Infineon
BTS500151TADATMA2 ✓ ActifComparaison des spécifications
| Paramètre | BTS428L2 | BTS500151TADATMA2 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,82 | $3,21 |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | — |
| Topologie | Single-channel high-side N-channel MOSFET with charge pump | — |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | [DATA_NEEDED: RDS(on) at 25C and Tj=150C] |
| Number of Channels | 1 | — |
| Status Feedback | Yes (dedicated status pin) | — |
| Protection contre les surintensités | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | — |
| Overvoltage Protection | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | — |
| Plage de température de fonctionnement | -40 °C to +150 °C | -40C to +150C (junction) |
| Boîtier | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | PG-TO-263-7-10 (D2PAK, 6 leads + tab) |
| Type de montage | Surface Mount | Surface Mount |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | — |
| Switch Type | — | High-Side Power Switch (PROFET+ 12V / HIC-PROFET) |
| Nombre de sorties | — | 1 |
| Internal MOSFET Configuration | — | N-Channel |
| Continuous Load Current | — | 33 A |
| Output Peak Current Limit | — | 39 A (typ) |
| Input Voltage Range (Vbb) | — | -0.3 V to 28 V (operating typically 5 V to 18 V) |
| Protection Features | — | Over-current, Over-temperature, Over-voltage, Reverse Battery, Ground Loss, Open-Load detection |
| Diagnostic Output | — | Yes (Status pin) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Statut RoHS | — | Compliant |
| Automotive Qualification | — | AEC-Q100 qualified |
| Nombre de broches | — | 7 (6 + tab) |