BTS428L2ATMA1 vs BSP742RIXUMA1 Comparison
Detailed side-by-side comparison of BTS428L2ATMA1 by Infineon and BSP742RIXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS428L2ATMA1 | BSP742RIXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | — |
| Number of Channels | 1 | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| Operating Supply Voltage | [DATA_NEEDED: nominal and range] | 5 V to 34 V |
| Standby Current | Very low (per datasheet) | — |
| Overvoltage Protection | Load-dump / overvoltage clamp | Yes (including load dump) |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Package | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-DSO-8-6 (SOIC-8, 3.90 mm body) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature Range | [DATA_NEEDED: min/max] | -40 °C to +150 °C |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Topology | — | 1:1 N-Channel High-Side |
| Family | — | miniPROFET |
| Output Current (Nominal) | — | 400 mA |
| RDS(on) Typical at 25°C | — | 250 mΩ |
| Load Dump Tolerance | — | 41 V |
| Reverse Battery Protection | — | -16 V |
| On-State Resistance (max) | — | [DATA_NEEDED: RDS(on) maximum at 25°C] |
| Current Limit | — | [DATA_NEEDED: current limit typical value] |
| Thermal Shutdown | — | Yes with auto restart |
| Short Circuit Protection | — | Yes |
| Open Load Detection | — | Yes (diagnostic pin) |
| Demagnetization of Inductive Loads | — | Yes (internal) |
| MSL Level | — | [DATA_NEEDED: MSL rating] |
| RoHS Status | — | Compliant |